Hi.
I have an Imate Jam. I have realized that when I try from the virtual keyboard of the telephone to recall a contact with the numbers pressed the central key of the ppc to enter in the contact I have the error:
Contactcmd.exe is not a valid pocketpc application
How can I resolve the error?
Can you send me contactcmd.exe ? (it is in the windows folder)
Thanks in advance
Bye
Related
Hi all!
I have an Anextek SP230 Pocket PC 2003 Phone Edition device. I don't have any MMS software included or a software to view the SIM Menu (vodafone services like news, etc.)
Is it possible to extract this softwares from an XDA II rom and install it on my device?
Thanks
Luk4S
hi
yes you can
I have an Anextek SP230 too, i use softwares XDA II
now i can send MMS
and now look 4 midi.cab album . cab camera .cab
Re: hi
The french extended rom can be downloaded from FTP mentioned here: http://forum.xda-developers.com/viewtopic.php?t=8403
I can also provide the following CABs (extracted them from some other ROM):
Broadcast_WWE.sa.CAB
CallerIDB31_Hima2_WWE.CAB
CameraB70_Hima2_WWE.CAB
CameraB70_Streaming_reg.CAB
ClearVueV2.4.380WWE.sa.CAB
Customization_TMO_PreRC_UK.sa.CAB
KSE_2.08WWE.CAB
MIDI561.sa.CAB
MMS16012_WWE.sa.CAB
OEM_AKU2a_WWE_04010401.sa.CAB
"t-mobile_shortcuts_only(UK).PPC2002_ARM.CAB"
TMCOMREG.sa.CAB
TMD_UK.sa.CAB
TMDUKCustomize.sa.CAB
Version_AKU2a.sa.CAB
VideoMMS.sa.CAB
ZipB11_Hima2_WWE.CAB
I have Rover S1 which is the same as Anextek SP230
Do you know any software that would make SP230 behave like a modem over IR or cable? wmodem program is not working.
hello
thanks but FTP The page cannot be displayed
waiting for helpe :roll:
ftp.nderal.serveftp.com
user: XDA (minuscule)
pass: XDA (minuscule)
the ftp works just fine
(
Gateway Timeout
The following error occurred:
Code:
A gateway timeout occurred. The server is unreachable. Retry the request.
--------------------------------------------------------------------------------
Please contact the administrator
when you press the url if the browser window it launch have http at first then it's because the forum's auto url linker mess up
copy paste and make sure that ftp is the first part of the url being displayed in the address bar
or you could use a real ftp client
like cuteftp
or total commander
or something
and if your firewall or your isp's firewall block active ftp
you can set your ftp client to use pasive ftp
icant
really thanx for help
but i try ftp.nderal.serveftp.com and http:ftp.nderal.serveftp.com/
and www.ftp.nderal.serveftp.com/ ((((((((
what i can do ....
can you send me just MIDI.CAB BY email [email protected]
thanks againe :roll:
Re: icant
http://mamaich.kasone.com/ppc/MIDI561.sa.CAB
What is this file doing? I think that playing mid-files is built-in into SP230
THANKS mamaich and all friend here
the SP230 cant playing all mid-files and after i but thes file its working very good THANXXXXXXXXX
MMS help
Hi, I have a Audiovox PPC4100 that it is the same thing that a Anextek sp230. A don't have the MMS function, someone can help me?
It is possible to have a CAB file that adds this function?
Thanks
hi
I have downloaded the wm2003se from lumpinstefan and i could change the rom of my pocket pc to that version by using activesync.
Now i downloaded another version of the rom and i tried to install it on my qtek 1010 (wallaby) and it in the black window on my computer appears:
"ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype"
When i press the next button in the setup it says " cannot execute the remote communication prgram. please make sure that USB/Serial is properly connected". and the setup shuts down.
i Need You to know that before the new rom i downloaded from lumpistefan i was using pocket pc 2002 on my pocket pc.
Now it's clear that there is some problems in the connection. i tried it on several computers but i faced the same problem. is there any setting on my pocket pc to change??
Please somebody helps me i really need to know how to solve the problem.
Regards, and thank you.
hi ng!
i need a solution to use my pda qtek 2020i as "modem-device" for my linux pc.
i managed to get a rfcomm0, can send at-commands via this device, could dial out with a local software on my pc.... but,
if i try to use p.ex. efax - efax tells, that the modem does NOT support fax.
is there any way to solve my problem?
thanx a lot for any hints.
mario
ramsesii said:
i managed to get a rfcomm0, can send at-commands via this device, could dial out with a local software on my pc....
Click to expand...
Click to collapse
Can you do GPRS ? AFAIK, the gprs and fax data
go over different serial channel than the
AT command channel. You will find more
info here:
http://wiki.xda-developers.com/index.php?pagename=HTC_GSM
http://wiki.xda-developers.com/index.php?pagename=BlueangelProgress
hi!
yes - i can do gprs!
the problem is, that a sdp browse MAC only gives me channel 1 for serial connection, channel 2 for dial-up networking, and other channel (audio, file transfer,...).
thanx for the 2 links - but, the second is for mobile phones with linux on it - the first couldnt help me out.
i use normal windows mobile 2003 on my qtek 2020i - not linux (maybe i will sometimes )
any other ideas around?
thanx
ramses
ramsesii said:
the second is for mobile phones with linux on it
Click to expand...
Click to collapse
The hardware information doesn't depend on
the operating system
- the first couldnt help me out.
Click to expand...
Click to collapse
You can see that all the phones
use AT+FCLASS=0 as an init string.
What is the reply to 'AT+FCLASS=?' on alpine ?
You can also try:
AT+FMI?
AT+FMM?
AT+FMR?
AT+FCC=?
AT+FCQ=?
unfortunatly - nothing works.
my rfcomm is up: fcomm0: 00:09:2D:2B:EC:3F channel 2 connected [tty-attached]
but in minicom, which is connected via rfcomm0 all i get is...
Press CTRL-A Z for help on special keys
OK
at+fclass=?
ERROR
at+fmi?
ERROR
atdt
OK
AT+FCLASS=?
ERROR
AT+FMM?
ERROR
AT+FMR?
ERROR
AT+FCC?
ERROR
AT+FCC=?
ERROR
AT+FCQ=?
ERROR
quit
ERROR
exit
ERROR
bye
ERROR
AT+FCLASS=0
ERROR
this sounds.... not good
or am i doing something completely wrong?
thanx for your help.
ramsesii said:
at+fclass=?
ERROR
Click to expand...
Click to collapse
Hmm. Works as expected on my Universal.
It has something to do with your radio firmware,
maybe needs some special setup, or it is
simply not supported.
AT+FCLASS=0
ERROR
Click to expand...
Click to collapse
I don't know how the AT debug works on alpine (look up the registry keys in the wiki for himalaya), but
you may enable it, and PM me the log.
p.ex truefax works on my device... with it i can fax-out.
maybe i will go on that solution - is not what i wanted to have (faxout from the pc directlly) - but better then nothing.
hope RECEIVING fax will work with it.
thanx a lot for your nice help.
I installed PocketMechanic Pro v2.16 on my XDA Exec but stupidly used a public serial number.
I have subsequently purchased the full program (with legit serial) but still the program bombs out with a 'refer to [email protected]' type message.
Does anyone know of a tool that will either search the PDA for hidden files and see when they're accessed and/or something that does the same for the registry?
I've asked the software publisher for help but response has been NULL so far.
Hi all,
Just downloaded Windows Live version 10.8 out of the wm marketplace but when I try to start up the application I get this error:
WLMMessenger is not a valid Pocket PC application.
Any one who knows how to solve this problem?
Thanks a lot already!
Rick
Problem fixed!
Solution:
WM Marketplace does not softreset the device after the installation.
So after installation manually do a softreset and all programs are working