Hi All,
We have a client who we supplied 2 TyTns the both have the same ROM:
ROM Version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version 32.34.7010.01H
ExtROM version 1.18.255.106
One of them connects to Wi Fi no problem. The other says the network is available but when you go to connect the network key code is invalid. The key is identical on both devices.
Any Ideas? (apart from a hammer)
S
possibly both devices are using the same device name,try changingboth names to something different
Yes, or go to connections, network cards and delete the one in question and then have it re-detect the network and re-enter the key from scratch. i.e delete the card first not just re-enter the key in settings.
Mike
Related
hi...
anyone can help me with this problem?
i don't know how to set my device to be able to use GPRS facility from my network provider..Matrix Satelindo..
cause until now i still cannot use the facility yet...
my device information is:
ROM version: 3.17.03 ENG
ROM date: 05/15/03
Radio version: 3.23.00
Protocol versionL 32S54
is there something that needs to be upgraded / downgraded from my device? and how to?
thanks for the help...
no problem, i'm using matrix satelindo and o2 xda...u know what, u can even use mms with it although i haven't try it yet...anyway here's the settings :
1. start -> settings -> connections -> connections
2. from the internet tab, select New..
3. fill in the name with anything u want like SatelindoGPRS
4. next the modem part; make a name (SatGPRS)
5. the modem should be Cellular Line (GPRS)
6. baud rate : 57600
7. tap advance and go to the name servers tab
8. fill in 202.152.162.66 at the DNS part
9. OK it and next to the acces point name, u fill satelindogprs.com
problem solved but for your info, don't use radio rom 4.21 for matrix satelindo 64 kb cards, it'll do strange behaviour to ur pda...
hope i can help..
I just got a Wizard. I always get this error "Unable to obtain a server-assigned IP address. Try again later or enter an IP address in Network settings". Can anyone help, what causes this? Thanks
I have the same problem, especially when I am leaving BT ActiveSync connection. What kind of ROM are you using?
My Wizard has the following:
ROM version 1.3.13.5. ENU
Radio Version: 01.12.10
Protocol Version: 4.0.13.23
ExtROM Version: 1.3.13.116
Thanks
had the same problem
Yea, I had that same problem whenever i synced with my pc. but after i upgraded it to the new rom i've never seen it anymore. i dunno, probably a problem in activesync.
Can Someone post the settings and procedure for using the various kinds of netowrk connections.
1. Activesync via USB cable passthru to internet
2. Cingular Edge
3. Wifi
What network setting should I use when trying to connect to the internet thru the type of connections listed above.
It also seems that when ever I switch network connections I have to soft reset in order to get my Cingular 8125 to use the connection. Is that the correct method? I thought all you should have to do is switch the network connection type and anything software trying to connect to the internet would automatically use the new network connection type.
Cingular_Custom_AKU2.3_Combo_Installer_V1.exe
ROM version: 2.24.10.1 WWE
ROM date: 4/17/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM: 2.25.11.102
I am having all kinds of problems with my GPRS Connection. I have input the settings for Centennial Wireless, my carrier, and everytime I connect this is the message i get
dialed:
private.centennialwireless.com
Cannot connect for unkown reason. To check your connection settings and chem them if needed, tap settings. If teh problem continues, reset your mobile device according to your manufacturer's documentation and try again.
I did a Hard Reset and put the settings in again with the same problem. Any help will be greatly appreciate.
HTC Tytn
ROM: 1.18.255.3
ROM date: 07/22/06
Radio Version: 1.03.03.10
Protocol Version: 32.34.7010.01h
ExtRom Version: 1.18.255.106
Did you activate the hsdpa protocol ?
No I have not. Can you send a thread or tell me how to open that protocol? Is this done by the provider or on the handset itself?
Also how will this help if I can not even connect to GPRS/EDGE?
I have resolved planning in setting->connection->gprs setting
CHAP Autentication...
Hello, i searched about my problem but i couldn't found anything about it.
I updated to WM6.1 (WM6.1Pro v3.02 (sun_dream))
ROM version: 6.141WWE
Radio version: 1.15.00
Protocol version: 1337.45
If I want to connect to my WIFI, the BA said that the password must have 8 characters and were wrong. But my password ist longer than 10 characters and I got the right one. The encryption is WPA-PSK, or is only WEP with the BA possible ?
greetz lenha
you have to get in to settings/connections/network cards and in the connection of your hotspot ot what ever you use you have to click "edit" and there choose your settings.