Related
Please enter your prophet registry and send me ALL FIELDS OF:
Hkey_Local_Machine\Drivers\BuiltIn\Battery
Dll -
Flag -
IClass -
Order -
Prefix -
For Prophet Qtek S200
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Battery]
"IClass"="{DD176277-CD34-4980-91EE-67DBEF3D8913}"
"Order"=dword:00000002
"Flags"=dword:00000008
"Dll"="battdrvr.dll"
"Prefix"="BAT"
I have this on my S200.
Thank you , but unfortunately it does not help me
On my prophet is wizard's rom, and it is not charging, i think that if i change battdrvr.dll and replace, it will charge and give me chance to write right ROM for prophet.
If someone have any idea how to write right rom on s200 where is wizards ROM please write here.
Try this:
1. Obtain proper ROM for S200 from ftp.xda-developers.com.
2. Try press power button and hold it about 5 sec. or longe. Your device must go to PowerOFF state. At this point it must charge battery when your plugin power supply.
3. Run ROM update.
Hello All!
On my QTEK9000 the keyboard shortkey "Fn" + "->" key doesn't load the Connection Manager anymore after I upgraded to v1.30.68 for i-Mate.
Q1: Is these difference between i-Mate and QTEK, and i-Mate JasJar doesn't have the Comm Manager red icon on the "->" key on the physical keyboard?
Q2: Is there any hack to setup this shortcut ?
Sorry, have not found any info so far.
THANK YOU VERY MUCH for your answers, All!
This was a known issue with the Beta ROM. upgrade to .76
Hi.
I want to upgrade my equipment to WM6 but i don´t know how to.
I´m a newbie so all the help are welcome.
The ROM version is : 1.30.77 WWE
ROM date : 02/20/2006.....
Radio version : 0.00.00 ( isn´t this strange ? )
Protocol version : 42.37.P8
ExtROM : 1.30.9010
That´s my device information above so what i have to do?
Where i can find a ROM that fully supports WM6 and of course that´s compatible with all functions that my phone has ( videocall for example ).
Many thanks to you all.
Regards from Portugal.
HI!
I asume that you have an UNIVERSAL (JasJar, qtek 9000...)
-1 download the ROM that you want.
-2 press light button + power button and then reset device.
-3 go to Activesync's connections settings and then UNcheck "allow USB connections".
-4 connect your device to you computer with USB cable (of course) and then double click (in the rom that you download) in "ROMUpgradeUt.exe" or "MaUpgradeUt_noID.exe" (this one is better).
Follow the instructions ok?
The WM6 have trouble with videocall in this device and have a lot of bugs but you can test this one: http://forum.xda-developers.com/showthread.php?t=312519
I hope this help but search in the forum because this threat is solved already...
Hello,
This is my first post on this forum.
Im new to the Pocket Pc's. I got this T-Mobile MDA II from my friend 2 days ago and that was the first time in my life when I touched the PPC.
I have a big problem.
MDA II is not reading the SMS (''the phone is not ready, try again in 15min'').
And another problem is GPRS. MDA says ''connecting'' or something like that, and nothing happens.
The PPC is from Germany, and I live in Croatia. And the language is in English-Germany.. Something is on English, something on Germany.
Can someone explain what's the problem ?
And another question
I download the WM6.1 AKU1.0(build 19199).
I can't get to the Bootscreen mod, I click the middle navigation button, then power button and nothing happens.
And where is the reset button ?
Sorry for my stupid questions and bad english.
But I need some help.. Please!
Please!
I need someone to explain how to install ROM on MDA II.
the reset button is on the left of the charging block ( tiny hole )
follow these instructions
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading ROM Image, please wait....',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
===========================================================================================
PS: Upgrade on your own risk
omg this is amazing...
ather90 thank you very much!
6.1.1a16CS (WM6.1 AKU 1.0) ROM is great.
I can now use my camera, use gprs, use internet..
Wonderfull
good that you finally succeeded. now try 6.1.1b16CS (WM6.1 AKU 1.0)
usb craddle or usb sync cable ?
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
hagisbasheruk said:
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
Click to expand...
Click to collapse
This is also my 1st post here. But I'd been monitoring the xda-developer forums for a long time. I spend more time reviewing posts rather than posting in forums. Anyways I think I can help. Here's the answer to your question: http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing. You can also use the search function provided by this website to search for topics that you need.
Thanks for the link which lead me to bootloader info below
"you can connect to the bootloader, either via a serial cable, and use a terminal program like hyperterm. or via usb, and use mtty. make sure you have disabled the serial or usb connection in activesync, before trying to connect to the bootloader."
So i am guessing its both USB CABLE or USB CRADLE got i just purchase one on Amazon for 90 pence
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
g_spot said:
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
Click to expand...
Click to collapse
here are the XDA mini s WM6 pages http://forum.xda-developers.com/forumdisplay.php?f=356
Hello, i'm looking for flash.dio for iPAQ91xc series, mine is GER, but i'd like to have it in WWE or CSY. Can someone point me to place where can i get SDLoader file or better can someone dump rom to it? Either GER or WWE language version.
I did some tries and now it's bricked "littlebit" i can enter SDbootloader and downloadfile modes only. (USB conection is dead)
thank you in advance for any help how to get through this
don't be lazy and try google or hp download - first link, second is howto get flash.dio from flash.nbf
nebud linej a ze bys se treba podival na stranky vyrobce ? -> http://tinyurl.com/4nb586 cca minuta hledani googlem
pokud ti nejde update pres active-sync tak jak stoho dostat flash.dio mas napsane zhruba zde -> http://forum.xda-developers.com/showpost.php?p=2509418
i don't think I was lazy. Maybe I missed that what you found...
2 fabiozzz:
I did a little research and found theese key combinations:
Clean bOOt - Voice Commander + OK + Reset
Download Image - Volume Down + OK + Reset
Calc Checksum - Volume Up + OK + Reset - disconnected, SD card out
RUU - Volume Up + OK + Reset - UsbConnected, SDcard out
SDloader - Volume Up + OK + Reset - USB disconnected, SDcard in
Modem_CAL - Voice COmmander + Volume Up + Reset
Diagnostics - Voice Commander + Volume Down + Reset
unfortunatelly i didn't hex editor cut so iPAQ was bricked (my fault) but guys at service changed it. I have new one for experiment
Who can help us telling the way to create a Flash.dio for Ipaq.914?