Hi
My TYTN shows from time to time "NO GSM" for a very short moment on the very frist screen (the one with the Version number)
Does anybody have a clue?
BR
Daniel
DanielS said:
Hi
My TYTN shows from time to time "NO GSM" for a very short moment on the very frist screen (the one with the Version number)
Does anybody have a clue?
BR
Daniel
Click to expand...
Click to collapse
I haven't had this happen to me but this used to be a quite common result from a bad radio flash to your phone. I hope you had Olipro's Hard SPL installed. In any case try the Hermes Upgrading, etc. sub forum and this thread to see if you can recover your device:
http://forum.xda-developers.com/showthread.php?t=286755
Hi
I was on Oli Pro 2.10 so I could recover.
BR
Daniel
Related
Dear all,
I have a Dopod M700. It actually is a HTC Artemis (ARTE300). But it doesnt have GPS like Dopod P800/W. I did a wrong ROM update using Dopod P800 ROM Image. Now my Dopod M700 is dead, and I can only enter Bootloader and can do nothing more because of "Invalid Model ID" and "Invalid Vender ID" errors.
I want to know some thing:
- Does PB + KITL method help like with Hermes devices (Is KITL mode exits in Artemis?)
- Can Imei-Check help on this situation
- Is there any solutions yet?
Thanks men!
Only solution..to get hold of the launch rom from Dopod to yr device..
hdubli said:
Only solution..to get hold of the launch rom from Dopod to yr device..
Click to expand...
Click to collapse
Yes, it could be the best solution for now.. but .. unfortunately there is no ROM image for Dopod M700. I could not find it anywhere. Please share if anyone has it.
- Does anyone know what is the CID of Dopod M700? DOPOD001 I expected but it seems not to be that one. I will try to build custom ROM
Thanks
You can download ROM Upgrade for Dopod M700 at http://www.dopodasia.com (must register and login).
It's named as RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEONgsm4.1.13.30_02.69.90_Cmp_Ship_R.exe.
Good luck!
Try this
http://forum.xda-developers.com/showthread.php?t=290241
may be it works with ARTE300 too
29a said:
You can download ROM Upgrade for Dopod M700 at http://www.dopodasia.com (must register and login).
It's named as RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEONgsm4.1.13.30_02.69.90_Cmp_Ship_R.exe.
Good luck!
Click to expand...
Click to collapse
Thanks 29a, I got the error "INVALID VENDER ID". Yes, because my Dopod M700 first came with Chinese Language (CHT) and the above is WWE so actually it will raise the Error. I would like to have some Utility to bypass Language check. Actually I bricked my phone because I wanted to change to English.
So please does anyone have Chinese version please share. I would like to have it alive first.
jackey said:
Try this
http://forum.xda-developers.com/showthread.php?t=290241
may be it works with ARTE300 too
Click to expand...
Click to collapse
Yes, Its really a good Idea. I dont have C3v1Unlock.zip because it was removed, so I downloaded C3V2Unlock.zip. Any time I run C3V2Unlock.exe my Computer reboots. I then changed the ROMUpdateUtility.exe and RUU_signed.nbh as instructed. But when I ran ROMUpdateUtility.exe i got "Invalid Update Tool" Error. Yes, I realized that because i have broke the Checksum when modifying ROMUpdateUtility.exe
Any idea else please!
computer reboots itself because of something's wrong with your winXP
I had that problem too. After reformatted my computer, the unlocker was running fine and successfullt unlocked ARTE200 (Orbit.)
Try using other computer or reformat your computer then reflash using the unlocker.
(or if you can make C3V2 run without reformatting, do so. coz i was donno what's wrong)
jackey said:
computer reboots itself because of something's wrong with your winXP
I had that problem too. After reformatted my computer, the unlocker was running fine and successfullt unlocked ARTE200 (Orbit.)
Try using other computer or reformat your computer then reflash using the unlocker.
(or if you can make C3V2 run without reformatting, do so. coz i was donno what's wrong)
Click to expand...
Click to collapse
Thanks Jackey, the problem is ImeiCheck utilities run only if you are in Windows mobile with activesync connected, it does not affect if you can only enter bootloader. My Dopod M700 is still dead. Please comment
anyone having c3v1unlock? I need it. one can download only c3v2unlock so please refrain from posting the imei-check link here.
29a said:
You can download ROM Upgrade for Dopod M700 at http://www.dopodasia.com (must register and login).
It's named as RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEONgsm4.1.13.30_02.69.90_Cmp_Ship_R.exe.
Good luck!
Click to expand...
Click to collapse
Here's the rom uploaded on PDAMobiz server-- Hope it helps..try it
http://files.pdamobiz.com/ROMs/XDA/..._INFINEongsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
crusher said:
anyone having c3v1unlock? I need it. one can download only c3v2unlock so please refrain from posting the imei-check link here.
Click to expand...
Click to collapse
I have it,where do you want me to send it?
C3v1Unlock.exe
C3v1Unlock.exe
xiao said:
C3v1Unlock.exe
Click to expand...
Click to collapse
Yes C3v1 Unlock.exe.
wondering if the threadstarter managed to solve this problem?
thanks for all!
anyway "Invalid Update Tool" means bootloader password is incorrect
Tamagochi said:
Dear all,
I have a Dopod M700. It actually is a HTC Artemis (ARTE300). But it doesnt have GPS like Dopod P800/W. I did a wrong ROM update using Dopod P800 ROM Image. Now my Dopod M700 is dead, and I can only enter Bootloader and can do nothing more because of "Invalid Model ID" and "Invalid Vender ID" errors.
I want to know some thing:
- Does PB + KITL method help like with Hermes devices (Is KITL mode exits in Artemis?)
- Can Imei-Check help on this situation
- Is there any solutions yet?
Thanks men!
Click to expand...
Click to collapse
Who can found the rom for ARTE 300..now mine M700 is dead too...
ROM: SPL:1.270000
IPL:1.270001
RADIO:02.67.90
OS:1.28.0.0
The rom is for Dopod M700 of taiwan ....
Help me............
Thx........
williamku said:
wondering if the threadstarter managed to solve this problem?
Click to expand...
Click to collapse
Hi all,
I am still keeping my dead Dopod M700 (Originaly in Chinese CHS). All I can do now is entering Bootloader. I am searching for Artemis Love CHS ROM but no luck so far. There is Artemis Love WWE but it did no help.
Tamagochi said:
Hi all,
I am still keeping my dead Dopod M700 (Originaly in Chinese CHS). All I can do now is entering Bootloader. I am searching for Artemis Love CHS ROM but no luck so far. There is Artemis Love WWE but it did no help.
Click to expand...
Click to collapse
me too...CID with Artemis Love 3340 is not same,,,
Tamagochi said:
Dear all,
I have a Dopod M700. It actually is a HTC Artemis (ARTE300). But it doesnt have GPS like Dopod P800/W. I did a wrong ROM update using Dopod P800 ROM Image. Now my Dopod M700 is dead, and I can only enter Bootloader and can do nothing more because of "Invalid Model ID" and "Invalid Vender ID" errors.
I want to know some thing:
- Does PB + KITL method help like with Hermes devices (Is KITL mode exits in Artemis?)
- Can Imei-Check help on this situation
- Is there any solutions yet?
Thanks men!
Click to expand...
Click to collapse
Now my Dopod M700 is dead,too! Help!
dopod m700 chs is from hk, go to dopodasia.com hongkong and register there maybe has m700 rom
Hello,
I wanted to upgrade my MDA Compact 2 to AKU3.
I started the update tool, like described in the forum here. The progressbar
on my MDA screen appears and when 95% are reached the update tool give me the ERROR [302]: UPDATE ERROR.
The reset of my MDA gives me only the 3color Boot-Loader Screen with the following Numbers:
IPL 2.06.0001
SPL 3.08.0001
and RUU in the right top corner.
Has anyone an idea to solve this problem, an downgrade to the old AKU2 can also not be done, because i get always the error about an wrong vendor ID.
I read a thread, to unlock CID, but this is not possible in Bootloader Mode, or?
thanks
Michael
SOLVED
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
I have the same issue. It's asking me for a password when I click on your link.
@optical, read the FAQ
@mwulz, thanks a lot ;-)
I got the same Problem. Does the link also work with the T-Mobile MDA Vario?
I don't want to crash my MDA Vario...
Thanks in advance
No, it won't help you. It's the radio rom, so it will not fit your wizard. You can try to flash any radio rom for wizard or any splash.
@mwulz
Thanks to you, I had the same problem (95% Error) and my mda compact II stoped working. With your tipp it works again!
Markus
mwulz said:
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
Click to expand...
Click to collapse
I have the same error on my Charmer with the AKU3.3, downloaded from the German T-mobile HP. Now I want to solve the problem with your described Radio-Rom but it is not downlodable from ftp://[email protected]/Up...adio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe !! What can I do??
it is downloadable, just type in password "xda".
thanks.
my charmer is in life again
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Stopper said:
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Click to expand...
Click to collapse
imei is usually under the battery
and for availiable shipped rom versions click my signature,go to artenis section and under "upgrading" choose availiable shipped rom versions(or click here),also if you want you can try this before flashing the rom...the instructions are there too,just download the mtty and follow the steps from the link
Stopper said:
[...]
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
[...]
Click to expand...
Click to collapse
I guys, I'm trying to repair my ARTEMIS that I bricked but I don't know which was the original rom because I have flashed with WM6 original rom the day after I bought it.
As asked by Stopper there is a way to know which was original rom so I could try to restore it by SD card?
thank you so much
bye
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
kareem9nba said:
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
Click to expand...
Click to collapse
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
keke1 said:
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
Click to expand...
Click to collapse
run the official exe
find it's content in users application data (in documents and settings)
copy to somewhere else
delete the spl.nbh and run the ruu
it worked with herald which was danish and now is wwe
haven't tried it on artemis,because it was wwe,but it should work
Hi! My friend has a VPA Compact II that has a problem: the phone has a Button ROM (I don't know wich version) and when he turns on the phone, it remains stuck with the screen that shows the IPL and SPL version.
Can the phone be fixed? Please, tell me how to fix his phone!
Thank you very much!
What does IPL/SPL say?
I don't know exactly. I know for sure that ROM version is 1.5.4.2. That's all... Sorry!
Andrei__1 said:
I don't know exactly. I know for sure that ROM version is 1.5.4.2. That's all... Sorry!
Click to expand...
Click to collapse
Reboot (push in the soft reset hole with your stylus). Watch carefully, during boot sequence all info will be displayed (IPL/SPL/GSM/OS). Report what you see there.
Hi all,
I have a MDA TOUCH XL (Elfin) from T-Mobile.
However when i got this Unit from a private Person iwould have real bad Signal, to mostly no Signal.
After some research i came across this Radio Update under the following Link:
http://gsmfreeboard.com/showthread.php?t=147057
However i did not read that this was NOT for the ELFIN but only for the ELF.
After 2 hrs of only having the Bootimage of T-Mobile for about 10 seconds and then a black screen i finally got back into the Bootloader to upload the O2 ROM that is also mentioned in the above Link (page 4 or 5).
Since then I can not flash, as i always get an Error about corrupted File or incompatible Device.
Same Error with the official T-Mobile Rom
Here my Units Info:
MDA TOUCH XL
WM 6 Professional
Installed Rom: O2 4.1.100.1332
IPL 2.21.0002
SPL 2.23.0000
Mostly i get an Error 270.
Can anyone please tell me what exactly i would have to get to update Roms again and how to update IPL and SPL (if needed) ???
I have read for days on different sites and either ia m to stupid to find the right answer or i am the 1st with this Issue.
English is not my Homelanguage, so maybe thats why i am to stupid i guess.
So if anyone could please help me?
I would be very thankful.
Thank you in advance:
Wolfgang