Related
Hello Folks!
my mdaII has extraordinary symtoms when i want to mark some text in notepad ore other text application!
instead of the black block (shows marked text) i get a extraordinary arrow symbol (see attached picture) and so i cant mark text any more.
this serious function does not stop till i make a softreset. after this everything works well.
has anybody an idea For what reason this arrow appears and how i can get rid of it??
Did you install TenGo?? I think that either TenGo or Fitaly produces this and I've no idea how to stop it. I also have this occasionally.
Cheerio
Howard
hshortt said:
Did you install TenGo??
Click to expand...
Click to collapse
No what is this?
Maybe we can find out which software we have both ?
i use:
ZenPhone
Repligo
TotalCommander
Visual CE
Code Wallet Pro
Spritge Backup
ScreenCap
if nobody knows an answer i have to hardreset my device because this problem is very distempering...
hmmm... from your list I have Zen Phone and Sprite backup. I recently upgraded both applications too.
Hmmm.... what to do, I thought it was TenGo and I removed it, but the problem is still there. I was then thinking that this could be Fitaly but you don't have fitaly so it can't be that.
I've found that when this problem happens if I switch input modes to another sip, then back again the problem is gone. This is a work around, not a fix and like you I do not know what's causing it.
I'm reluctant to hard reset as I've just done a rebuild recently. I'm hoping my next hard reset will be for Second Edition.
Have you had any more luck with it?
Cheerio
Howard
hshortt said:
I've found that when this problem happens if I switch input modes to another sip, then back again the problem is gone.
Click to expand...
Click to collapse
Sorry for my lousy english what do you mean with "switch to another sip" ??
@Guest,
Just select another input method like character recognizer and then back to the keyboard or whatever software input method (SIP) you preffer.
Regards,
Rayan
I also have the same problem. It seemed to appear after I installed ThinkOutside BT Keyboard.
Rayan said:
@Guest,
Just select another input method like character recognizer and then back to the keyboard or whatever software input method (SIP) you preffer.
Click to expand...
Click to collapse
Thanks for explaining me ;-)
I understood right but this tip did not work on my mdaII :-(
Hi Folks!
Now i got my MDAIII an have THE SAME PROBLEM!!!!!
that means it HAS TO BE an part of software i install because my new device has windows mobile 2003 SE!!
Did nobody find out how we can get rid of this "feature" ???
This is very interesting indeed! Are you saying you have the "feature" on a XDA3 out the box? Did you install any keyboard related software? Then again the XDA3 has the internal keyboard and therefore I assume it has some form of drivers pre-installed to support this.
k_kirk said:
Are you saying you have the "feature" on a XDA3 out the box?
Click to expand...
Click to collapse
No!
I installed all my software already. i will try to find out which program it is!
But i have to use the device so i cant hardreset it every day :-(
This was resolved just before the site crashed and lost data. Send me you installed software and I should be able to remember which one it was, PM when you update as I may miss this thread.
paulmc said:
This was resolved just before the site crashed and lost data. Send me you installed software and I should be able to remember which one it was,
Click to expand...
Click to collapse
Wonderful, here is the List:
Pocket Zen Phone 5.0
SPB Pocket Plus 2.2
Visual CE 8.0
ScreenSnap 1.0
Sprite Backup 3.1
Codewallet Pro 3.6
Resco File Explorer 4.30
Total Commander
Audio Note
Pocket Controller 4.09
i hope i did not forget something ....
spb if I remember correctly, I would then try total commander second
paulmc said:
spb if I remember correctly, I would then try total commander second
Click to expand...
Click to collapse
I'll try! Thanks for your hints!
hmmm...
I still have this too, I thought it might be Fitaly but coming to the conclusion that it's not. It's a severely annoying problem.
Narrowing down the lists of software that have been published, I have the following in common.
SPB Pocket Plus
PocketZenPhone
Sprite Backup.
I noticed that both PocketZenPhone and Sprite Backup appeard on both published lists, has anyone found the culprit?
Cheers
Howard
hmmm.... starting at the top, I removed SPB Pocket Plus and the arrow is gone from notes.
Two soft resets and the arrow is still gone!
Yet another bug with PocketPlus then???
Cheers
I have seen this on my XDA II - and the only applications from the lists that I have installed are PocketZenPhone and Resco.
Well having removed Pocket Plus to check, I've reinstalled it and I still don't have the arrow. So far, so good.
I don't know if the soft reset cured it (temporarily) or if installing the latest build of PocketPlus did it.
I'm a big fan of SPB's pocket plus, but the 3.0 version has some conflicts with the I-Mate K-Jam. While I can wait for them to work those out in most instances, I REALLY miss the ability to completely close tasks via the "X" in the upper right corner of the screen.
Has anyone found a compatible program that allows users to COMPLETELY close programs using the "X" button?
Thanks for any advice!
(As an aside, you'd think that after 5 versions and all the problems with programs/memory in WM2003PE, Microsoft would have included this feature in the OS.... but.... nooooo....)
wisbar advance 2
works for me.
NOT REALLY
IT WORKED FINE FOR ME TOO BUT.............
THE NAJOR PROBLEM THE WHOLE DEVICE HANGS UP AFTER A SOFT RESET!!!!!!!!!!!!!!!!!!
every time i soft reset the device with spb3 installed the device just hangs up and the only way to get it working was a hard reset.
I do not have this problem when spb3 is not installed
anyone else had this problem????? any ideas??
i used magib button...
regards
miguelromerom said:
i used magib button...
regards
Click to expand...
Click to collapse
When you install SPB + 3.0 go to settings for SPB and uncheck "Safe Mode on Soft Reset" This is what causes it to hang. When you uncheck that everything runs fine
I have SPB + on my K-Jam
Me 2
yes but my k-jam don´t lets to install pocket plus ?¿?
regards?¿?
I installed Magic Button - worked fine when I actually tap the "X" icon. For some reason, though, it doesn't seem to work when using a hardware button assigned to OK / Close.
Any ideas?
USE HANDY SWITCHER V 2.1 VGA COPMATIBLE....... :lol: :lol: :lol:
miguelromerom said:
yes but my k-jam don´t lets to install pocket plus ?¿?
regards?¿?
Click to expand...
Click to collapse
Well, forgetting the broken English, I am having this same problem, too -- the CAB file only installs 10-15%, then just craps out, and the Windows "unsuccessful install" message pops up.
Any thoughts? Have I corrupted some registry entry or something, that after the first bad one, does not allow the Pocket Plus CAB to properly install?
Any thoughts would be appreciated.
bit of an extreme suggestion, do a hard reset and re-install from scratch,
sorry all i can suggest. :?
i do but, it´s imposible
I put smartskey and omap onto my mda...it wasn't working properly so I uninstalled it....
there are no visible signs of the programs on my device but everytime my device wakes up or powers on i get this:
Notification Error
Cannot execute "windows/start/menu/newfoldr/smarskey.exe"
then behind it i get
Notification Error
Cannot execute "smartskey/snartskey.exe"
I just want this to be off of my device since it has been so much trouble. Can someone please help me figure out how to get rid of this without having to do a hard reset?
\windows\startup
remove it from there...
and also remove the smartskey folder where you installed it from...
i did that...nm i ended up doing a hard reset. I deleted the program and folder...there were no visible traces...idk what happened
I had this problem too. Extremely frustrating especially since I had removed all traces (so I thought) of smartskey.
Turns out, Smartskey leaves behind a notification message that gets queued up even if you remove the program and it's shortcut from the startup menu. You need a program like MemMaid to clear the notification message.
Annoying Smartskey issue, PLEASE help
nandaiyo said:
I had this problem too. Extremely frustrating especially since I had removed all traces (so I thought) of smartskey.
Turns out, Smartskey leaves behind a notification message that gets queued up even if you remove the program and it's shortcut from the startup menu. You need a program like MemMaid to clear the notification message.
Click to expand...
Click to collapse
I also have this problem on a Wizard and a Prophet. Even though you remove 'all traces' of Smartskey it keeps coming up wuth the queued notification message. Does anyone have a fix for this?
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Re: Annoying Smartskey issue, PLEASE help
Stabilo said:
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Click to expand...
Click to collapse
MemMaid is WM5 compatible. I use it on my Wizard without problem.
EDIT:
Re uninstalling smartskey - I thought there was a specific way to uninstall it mentioned in the smartskey thread? Does this not work?
Re: Annoying Smartskey issue, PLEASE help
Tezcatlipoca said:
Stabilo said:
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Click to expand...
Click to collapse
MemMaid is WM5 compatible. I use it on my Wizard without problem.
EDIT:
Re uninstalling smartskey - I thought there was a specific way to uninstall it mentioned in the smartskey thread? Does this not work?
Click to expand...
Click to collapse
Just tried MemMaid (demo) on the Prophet. It cleared the problem straight away. Went back to the Wizard and MemMaid also worked on that, both machines now clean of the Smartskey notification message. Now that I know how to remove the message I might play around with Smartskey some more. The Smartskey concept is quite good but it seems to interface badly with Omapclock (might just be Microsoft's buggy notification software).
MemMaid also looks a good utility for $15. I think originally I might have been trying to run the MemMaid (installation) exe from the Wizard rather than installing over ActiveSync.
hi, i use smartskey and omap together and they both work beautifully with each other, my device is quicker thanks to omap clock and the wizard is excellent as a one handed device thanks to the shortcuts it creates just like the prophet device where it creates ur soft keys to be the start button and OK button as well.....its like having 2 extra keys just like the prophet.......you can also use the software Check Notifications 1.9 by ScaryBearSoftware to get rid of the smartskey.exe from the notifications queue......
MemMaid v. Smartskey
I installed Smartskey, and it was unhappy. Then the bloody "Notification Error..." started popping up consistantly.
Reinstalled Smartskey, no help.
Uninstalled, No Help.
Looked it up here, Installed MemMaid
Problem Solved.
BTW- Reinstalled Smartskey and OmapClock and they work wonderfully. My initial eror was installing to the SD Card and not main memory.
Thanks for the fix.
I have an O2 xda Neo (PM300) running Windows Mobile 5 Pocket PC.
All of a sudden I noticed I no longer receive notifications or reminders of appointments or tasks on my "today" page nor any audible sounds. Even though I have:
1. Enabled sounds for reminders in "sounds & Notifications"
2.checked the "display message on screen" and "play sound" boxes in the "notifications" submenu
3.Checked the "set reminders for new items" box in the "appointments" sub menu in "options" in "calendar" (and done the same for "tasks"
My clock is correct. I have soft reset the unit a few times, I have set sample appt's and tasks and attempted to set a reminder for 5 minutes prior just to test and still nothing...
It was working fine upto maybe a couple weeks ago and just stopped working one day. I am at a loss, as the sheduling/task/appoitntment aspect is the main reason for me going the pocket pc route.
Now, I have no advance warning of tasks or appt's other than the calendar displaying the next few or so the day of or day before.
Very frustrating!
Look for Check Notifications ScaryBear Software. This program might be you solution
I had the same problem this week.
In my case it was either the (failed) installation of pocket clock or pocket max phone alarm that did it.
I loaded a previous week's sprite back-up (program part only) and that fixed the problem. I have not tried to reinstall pocket max phone alarm.
Will not reinstall pocket clock because that did not work anyways.
Robin
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
davetribe said:
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
Click to expand...
Click to collapse
I have exactly the same problem - but unfortunately cannot remember when it showed up the first time. I do not want to try a hard reset, also checking pocketmax seems that they only advise to do a lot of reinstallations. And I worry the problem will show up again later as I want to continue using phone alarm. I rather would like to change registry entries.
- Anybody has some idea what to change?
- I found an empty string value WAVEFILE in HKKLM\SOFTWARE\Microsoft\calendar\reminder - can anybody tell me their value here
- same empty value is in HKKLM\SOFTWARE\Microsoft\Tasks\reminder
Thanks Hase01
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Way2go said:
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Click to expand...
Click to collapse
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
hase01 said:
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
Click to expand...
Click to collapse
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
Just download my Free Task Manager found here:
http://forum.xda-developers.com/showthread.php?t=280104
1) Launch it on your pocket pc
2) Select Notifications tab
3) First try to remove duplicates
4) Try to remove SCRIPT:0x000...
If it still doesn't work, select all of them and disable them.
Do a soft reset and create a new notification, if it works, I suggest you to enable only the necessary notifications, so those like:
CALENDAR.EXE
\Windows\calupd.exe
replog.exe
calnot.exe
clocknot.exe
and delete all [none] notifications
Cheers,
.Fred
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
hase01 said:
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
Click to expand...
Click to collapse
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
dotfred said:
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
Click to expand...
Click to collapse
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
hase01 said:
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
Click to expand...
Click to collapse
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
hase01 said:
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
Click to expand...
Click to collapse
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
dotfred said:
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
Click to expand...
Click to collapse
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
hase01 said:
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
Click to expand...
Click to collapse
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
dotfred said:
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
Click to expand...
Click to collapse
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
hase01 said:
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
Click to expand...
Click to collapse
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
dotfred said:
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
Click to expand...
Click to collapse
I got the notifications back. I think it was basically repaired by installing alarmtoday again from backup. I think the problem could have been caused by the new sktools version. Strange.
B.t.w. do you need a beta tester for oyur TM on IPAQ. Then just sent me a pm
Hase
Ok. I have the same problem recently.. unsure what is the problem, but it seems that softreset *cause* (not solve) the problem, some what.. during my testing.
Anyway, I tried a few solutions listed, and the easy one is to use the TaskManager (freeware) to find the notification with 'Status' is in 'signalled'. These are passed notifications and it seems that these are causing the problem. As soon as I've removed them, the problem seems to have solved.
Then, I tested it again, by removing the 'Init_tray' from the startup and do a softreset. I tried it again, and it doesn't work. I check again on Task Manager, those 'signalled' stuff are back.
I set up an alarm clock on my P3600. When it woke me up I didn't get the soft key to shut it off. From that point off - it hounts me. Soft reset the device so many times in the last few hours it's driving me crazy. I will get the wakeup tone right after I soft reset EVERY TIME. and then every few hours during the day. I had MS Voice command which I removed. I tried to set a new alarm but that one just added yet another unstopable reminder. I think I also don't get notification for meetings so maybe something is wrong in the registry???
HELP... I don't want to HR the device.
WM5 by the way.
Thanks,
Nir
By the way - tried to remove the notifications from the queue using pocket mechanics but after soft reset - they all came back....
Had the same problem, what solved it was a hard reset.
ari79 said:
Had the same problem, what solved it was a hard reset.
Click to expand...
Click to collapse
had the same problem also...
only hard reset helped...
what s/ware are you using for your alarms?
I was using the built-in clock.
Just hope that official WM6 is out soon so I have two good reasons to HR..
i have the very same problem!!! any ideas how to resolve it without HR?
fantomex said:
i have the very same problem!!! any ideas how to resolve it without HR?
Click to expand...
Click to collapse
I didn't find any
sometimes ago i install some 3rd party alarm and remove it, bcoz it did not suit me. and install another one.
but first one left some message in notification queue, which always complain "Cannot find program bla-bla-bla...".
solution: install any software (like SKTools) and look inside notification queue (this queue respond for any notifications/alarms/etc..) and cleanup unwanted notifications.
hope, this helps.
added: sorry - did not read that you already try to do this. but anyway this is a problem - notification queue somehow hold this record which annoy you. you just have to find the way to clean it...
Same problem here, what I do was recover from a backup taken a day before the problem start. That solve it.
The problem start suddenly...
I try soft reset, turn the device off (remove the battery) and then turn it on again, also do the MemMaid 2.0 stuff with no positive results...
Sprite backup was my solution.
WM5 (factory rom, GPS enabled)
Default built-in clock, no alarm managers or any third party software.
Broken Alarm Clock
I have same problem on my Orange M700 (standard) and still do, even after a hard reset!? Excuse my possible lack of knowledge, but could this be just an issue with the registry? Or the original WM setup files?
Same problem on S300+. I don't want to make a hard reset.
Does anybody found a registry solution or something less violent ?
hmm.. maybe using alarm software ? that's helped me before.. instead performing HR of course..