Hi guys. I've made this hack with mortscript in case to be able to listening music via bt headset. It works perfectly, but now I want to mange my device NOT to disconnect BT connection after power button pressed. My goal is to save power consumption. It worked well on my previous device Eten M600 without any registry tricks and settings.
Thanks
Vito
TyTN,
Custel 2.5
Transcend 2 GB SDCard
Related
Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!
this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..
XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...
Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?
Good one... will try it later
Has anyone tried with Motorola HS 850???
Has anyone tried with Motorola HS 850???
So far, i have not tried it on XDAII... but i think it should work..
Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks
I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?
Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason
i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.
@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo
does this method enable your bluetooth headset to receive calls?
I've just flashed the lite ROM from PDAMobiz, generally happy with it (much more free space, no Tomtom in ROM) but my bluetooth headset SonyEriccson HBH-608 doesn't initiate voice dialing when I press the headset button. With original HTC ROM it worked. Now it just starts the phone application and transfers all sounds (screen taps etc.) onto the headset.
The rest of bluetooth functionality works well.
May it be fixed by some settings or tweaks?
Hi all,
I use a THB carkit integrated into my stereo. It uses usb connector to power the pda but bluetooth to trick the pda into thinking a headset is in use so calls are handled by the carkit. Aside the problem of bluetooth intermittantly turning off, is there a way to forward all audio (especially tomtom) to the "headset" carkit?
I've searched the forum and there is plenty of info on bluetooth headsets and how the button on them can be used to start audio via bluetooth, but the carkit doesn't use any buttons. I would be happy enough if there is an app to run whenever I want audio over bluetooth, anything really to sort this out.
Cheers all.
Anybody have any suggestions pleeease?
well sounds like your in a tight spot. I believe that all the audio programs use the button to initiate the audio transfer. Perhaps if you look at the reg edits for these programs you might be able to toggle it with some other input from the phone.....
There is a free program called BTAudio that you could try
tried that program but it relies on pressing the voicedial button on a headset which I don't have.
Hi,
I have a Vodafone P3600 which I had unlocked and flashed to test both HTC WM5 and Faman WM6 3.3 and 3.4. I have a problem using it with my Parrot CK3100, and it's the following: devices pair perfectly, but when I leave my car and then return, most of times P3600 does not connect with handsfree. Sometimes, it does connect, but after a long time. This occurs with any OS version I have tested.
A problem with CK3100 is discarded because I have flashed it with latest software version, and it was tested with a HP RW6815.
I tried disabling power saving, setting bluetooth as discoverable, installing Jetware, but nothing made it work as it should.
I'm near to sell my P3600 and buy a new HTC Touch only to solve this problem, because I need much a handsfree working in my car.
Can any of you give a hint of what the problem could be?
Thanks.
I forgot to say that if I power on my HTC, it always connect to the Parrot. But when it's in standby sometimes connects and others no.
I have an SonyEricsson HBH-DS200 and this works unfortunately with the P3600 also in a from you described way. I tryed AWE and PDAVIET and also AX3L ROMs.
Other points and problems with BT HandsFree are:
1.) A litle icon to show that the BT HansFree is connected will be showed in the status only after the first paaring. After that, nothing shows you, that the BT HansFree is connected (and therefor can be used) or not.
2.) After a phone call the BT HandsFree will be disconnected.That meanns, that I can not hear the phone ring in the earpice. I only hear it from the P3600. I have 2 choises after that:
a.) If I push te Answer button on the P3600, the voice is on the P3600.
b.) If I push the Answer button on the BT HansFree then the voice is on the BT HansFree (but it will be disconnected after the call).
3.) The volume can not be changed if I use the BT HandsFree. That means, the volume slide bar can be moved/changed, but this has no effect to the volume in the BT HansFree.
In my opinion if the paaring is done and the BT HandsFree is switched on it should be always:
- connected
- an icon in the status line appear
- the voice in the BT HandsFree - independent if the answer button is pushed on the phone or on the BT HandsFree
For me is the BT HandsFree very imortant, and I am a litle bit disappointed, that a device for 500 Eur works that buggy with a technology that is almost 10 year old.
Hello Everyone,
I've got a USCC Vogue, which is running a wm 6.1 rom I cooked using PPCKitchen's Rom Kitchen. The strange thing is, I paired my Jabra BT8010 headset to the vogue, and it works great, until I turn it off. To get it to work properly again, I have to delete the device and repair, OR I have to put the headset in Stereo A2DP? mode, then press the play/pause button, after which I can switch back to phone mode with the headset with very few issues (ie, only the known MSVC1.6 problems.) I've tried using acbToggle to switch the audio gateway over to bluetooth, but the volume is low. I've also tried plugging in my headphones and then toggling, and that helps the low volume issue some, but not as much as re-pairing or doing the a2dp trick. Also, shouldn't the vogue automatically connect to my headset upon turning the headset on? Because I have yet for it to do so. Also, if I go into the Connections/Bluetooth menu item, I see the headset, and if I bring the menu up for the headset and select either Set as Headset or Set as Wireless Stereo, nothing happens. Is there some other way to set my headset to automatically connect as Wireless Stereo? (this setup gives me the best performance and volume)
Thanks in advance for any help/information anyone can give me.
Jamie
hudson_macbeth said:
Hello Everyone,
I've got a USCC Vogue, which is running a wm 6.1 rom I cooked using PPCKitchen's Rom Kitchen. The strange thing is, I paired my Jabra BT8010 headset to the vogue, and it works great, until I turn it off. To get it to work properly again, I have to delete the device and repair, OR I have to put the headset in Stereo A2DP? mode, then press the play/pause button, after which I can switch back to phone mode with the headset with very few issues (ie, only the known MSVC1.6 problems.) I've tried using acbToggle to switch the audio gateway over to bluetooth, but the volume is low. I've also tried plugging in my headphones and then toggling, and that helps the low volume issue some, but not as much as re-pairing or doing the a2dp trick. Also, shouldn't the vogue automatically connect to my headset upon turning the headset on? Because I have yet for it to do so. Also, if I go into the Connections/Bluetooth menu item, I see the headset, and if I bring the menu up for the headset and select either Set as Headset or Set as Wireless Stereo, nothing happens. Is there some other way to set my headset to automatically connect as Wireless Stereo? (this setup gives me the best performance and volume)
Thanks in advance for any help/information anyone can give me.
Jamie
Click to expand...
Click to collapse
The real questions is did it work before you flashed your custom creation? Is it possible that there is an issue with your ROM?