Hi,
recently, something strange happened.
i cannot enter into phone setting screen, even i tried to enter via phone option or control panel, my x01ht no response (but not hang)
any advise? thx a lot!
Related
Help! I downloaded Phonealarm from the net onto my xda mini s. after it installed on my xda it said to do a soft reset. now the screen stays off while the phone is on. i can recieve calls as normal but i cant use my phone in any other way as i cant see!
any help greatly appreciated
dug
I've used Phone alarm for a while and didn't had that problem. Are you sure it is not your backlight? I've fooled myself once or twice by turning the backlight off by accident, the hardware button that is. Press and holding the power button turns off and on your backlight while the display is still working. If otherwise then disregard this silly remark.
So its the screen totally switched off or the backlight? What happens if you sof-reset? if suppose you could see the splash screen, then it maybe like some software is causing the issue. Try connecting to active sync & remove any unwanted program from startup folder or you can even un-instsall from active sync.
HI,
My QTEK S200 enter lock state without possibility of awaking it (no power button, & no touch screen), while still running ....
Must soft reset it ...
Please, let me know about some solution .... Perhaps through registry?
Are you talking about the device lock plugin on the today screen? If so you should be able to unlock the device with the left softkey only.
yonipapouf said:
HI,
My QTEK S200 enter lock state without possibility of awaking it (no power button, & no touch screen), while still running ....
Must soft reset it ...
Please, let me know about some solution .... Perhaps through registry?
Click to expand...
Click to collapse
Have you set a password or PIN for unlocking the phone? This sometimes causes the phone to refuse to unlock with a black screen. One fix that solves this for some phones is to set the backlight timeout to the same value as the standby timeout.
hey all,
my problem is this: if i put my BA into flight mode, after a random period of time (its been anything from 5min to 30min) it automatically comes out of flight mode and switches back to the phone being on.
now, i'm basically using my BA as a pure pda so i haven't even got a sim card in it... if i can disable the phone side of things all together, that'd be great, but if not some kind of fix to stop it reenabling the phone would be much appreciated.
thx~
-kdp
Hi
have the same Problem in Flight-mode. Is there anybody who knows how to patch this?
This might be a problem for me..
I'm away to KL next week (12hrs in the plain)
Flight-Mode
Be sure, that no application (like Pushmail) is starting any GPRS-Connection.
In my case (installed HTC Comm-Manager), I can't start/stop Pushmail over the Comm-Manager - i change the settings in ActiveSync (Shedule) and change to manualy.
Then it's recommended that you stop the Data-Conneciton. I can't stop it with Comm-Manager, so I use the G-Symbol in the Titelbar to end the connection.
Perhaps it helps.
Chris
I think i've found a fix for this... well, so far my phone hasn't gotten out of flight mode for 72 hours so i'm hoping this is a fix.
anyways, goto start>settings>menu and make sure "profiles" is enabled
then goto start>profiles
in all the profiles, for the ring type select "none" and set the phone volume to the lowest setting then click apply for each one separately
eg: click on general, select "none" for ring type, set the phone volume to none, click "apply" or "ok" (its the left softkey). then go back into the program and repeat for silent, etc etc...
but yeah, this seems to have worked for me so far. ^_^v
I have a big Problem with my german xda-star (O2, german Niki):
I wanted to lock the Touchscreen during a call, so I tried "S2U2" and "Slide Actions".
Here is the problem: When the Phone is connected to my PC via USB Cable everything works perfectly, but if no cable is attached these Programms don't work correctly:
"S2U2": Can't enter the settings, no caller ID, while ringing Screen freezes in "slide to unlock", screen which can't be unlocked.
"Slide Actions": On slide down or end call the phone starts to freak out, it is locking/unlocking - locking/unlocking... ultil i take out the battery.
Again: If the Phone is connected via usb it behaves perfectly normal!
Any Ideas??? Thanks...
Have you ask this question the writer of this software?
what OS you use?
Hi Netrunner,
I use the ordinary O2 Branding, haven't changed anything yet...
Please help, i have to get this thing to work :-(
Hi,
since a couple of days I'm facing the following strange bug:
- I start a call, get connection, screen goes out: all okay for now
- I end the call, I loose network connection (an "x" is next to the antenna symbol)
- I can perfectly start a new call or receive one!!
- As sms can't get through (outgoing) because "no radio connected"
- the phone dialer screen says "phone off"
- when I check the Connection Manager it says "airplane mode"
- switching of the "airplane mode" is not possible
- when I press the power button (into sleep mode), and press it again (even immediately), unlock my S2U2, everything is back to normal. Very briefly I see (on the S2U2 screen) a switch from: network name => no service => network name. I don't even need to enter my PIN.
Side note: when I end the call before it gets connected (AND the connection vibrate), nothing happens...
I first encoutered this behaviour after installing SmartLock 1.7E (http://forum.xda-developers.com/showthread.php?t=505032).
I removed it shortly after. Searched the registry, but couldn't find anything.
Problem of course remains.
Anyone has a solution, hints, things to try...?
Thanks for reading!
BartV
try this.. uninstall everything new. clear all cache. Soft reset. See if it returns to normal. If unsuccessful.. try hard reset.