When i write i wana some software or hack that puts a little icon on the screen to show im in caps lock/capital letter as apopsed to small letter. any one know how to do this?
use registry editor, preferably total commander, and here's the tweak
HKCU\ControlPanel\Keybd
Key: EnableIndicator (dWord)
Value: 1 = enabled
0 = disabled
Can anyone post the original registry values in [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] for HTC Touch HD? Especially the ClassID.
After (un)installing SRS WOW I don't have any sound anymore. (Only via BT)
I would be very grateful if I could fix the problem with these values.
Best,
Danckel
I've got these
AcousticFile - String - \windows\AudioPara3.csv
Dll - String - wavedev.dll
Flags - DWord - 0
IClass - MultiString - (on two lines)
{37168569-61C4-45fd-BD54-9442C7DBA46F}
{A32942B7-920C-486b-B0E6-92A702A99B35}
Index - DWord - 1
Order - Dword - 11
Prefix - String - WAV
Priority256 - DWord - 149
Thanks, man. Unfortunately, it didn't help me.
Same problem here i uninstall it and sound gone then i install older ver here
and sound came back but i really need if someone can post a .reg file for original values
Thanx
Hello all,
I'm using MS Voice Comand on my Athena in combination with several BT Headsets. Pressing the Multifunction button at the headset did start Voice Comand. Since the last reset pressing the Button at any headset does not start Voice Comand but brings up the phone screen.
What can I do ?
Thanks in advance
Dieter
Solved this way (is from the forum, found by long search ):
....
You may use the button with changing the following string in registry;
edit the registry with resco reg.editor:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand
if there is a string named "path" already change the string to ;
\program Files\Voice Command\voiceCMD.exe
or if you do not have this string named "path" then just simply add the the string and name it "path" with the values just given above.
After doing this you will be able to have the voice at your BT headset as well as you will command through your BT head set but neverthe less it does not work perfectly depending on your BT headset
....
Dieter
Hi Guys,
What do you think are the best registry edits on the TD2 and what do they do?
I have been looking through the old ones for the TD1 and i have been changing thinks like the GPS enable on the camera ETC.
Any good suggestions you might have to improve the TD2 experience would be gratefully appreciated
yah.like a compilation of regedits would be great along with its description
the only one I know if PHM regedit, it works fine with the D2
sk tools
sk tools...the best! cleanes , optimises,...the whole lot
i think he don't mean the best registry editor. He means the hack to do with the reg editor.
\\Yoshi
You're absolutely right
My bad
here i got some that i use. (credits go to the people who found them NOT ME)
Automatically lock your Diamond 2 (from way back in the daimond days)
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
To basically use Manila in landscape mode, there are 3 registry mods needed:
1) Add string value to HKCU\Software\HTC\Manila
String: EnableLandscape Value: true
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: TF3D Value: \Windows\manila.exe
3. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: TF3D Value: Manila
To use Windows Explorer in landscape mode, there are 2 registry mods needed.
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: File Explorer Value: \Windows\fexplore.exe
(in dutch the string is called verkenner, value is the same)
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: File Explorer Value: FEXPLORE
(in dutch the string is called verkenner, value is the same)
To use Navigon MN|7 in landscape mode, there are 2 registry mods needed:
(works for tomtom to, watch that you use the correct path/.exe and name of tomtom----audio-FIX
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Storage Card\Navigon\MobileNavigator.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: MobileNavigator
To use Excel Mobile in landscape mode, there are 2 registry mods needed.
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Excel Mobile Value: \Windows\pxl.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Excel Mobile Value: pxl
To use Word Mobile in landscape mode, there are 2 registry mods needed.
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Word Mobile Value: \Windows\pword.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Word Mobile Value: pword
Dear All,
How to remove or delete the new key from PHM Registry Editor? Thank you.
Autolock
"Automatically lock your Diamond 2 (from way back in the daimond days)
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked"
When I do this my device locks itself automatically after few secons even though I've set the backlight to go off after 30 seconds. Does anybody have a solution that can handle this problem?
thanks!
Code:
Manila Home softkeys:
HKLM\Software\HTC\Manila
String HomeLSKArguments //app argument, optional
String HomeLSKPath //app path
String HomeLSKText //left softkey text
String HomeRSKArguments //same, but for key on right side
String HomeRSKPath
String HomeRSKText
koehl said:
Dear All,
How to remove or delete the new key from PHM Registry Editor? Thank you.
Click to expand...
Click to collapse
Just hold the stylus on the string and the menu will appear.
real187 said:
To basically use Manila in landscape mode, there are 3 registry mods needed:
1) Add string value to HKCU\Software\HTC\Manila
String: EnableLandscape Value: true
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: TF3D Value: \Windows\manila.exe
3. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: TF3D Value: Manila
Click to expand...
Click to collapse
You mean that after this hack Manilla will auto-rotate according to its orientation, or will it PERMANENTLY be in landscape mode?
Joopvan said:
"Automatically lock your Diamond 2 (from way back in the daimond days)
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked"
When I do this my device locks itself automatically after few secons even though I've set the backlight to go off after 30 seconds. Does anybody have a solution that can handle this problem?
thanks!
Click to expand...
Click to collapse
please correct your times one more at the battery settings (advanced).
jcan said:
You mean that after this hack Manilla will auto-rotate according to its orientation, or will it PERMANENTLY be in landscape mode?
Click to expand...
Click to collapse
it wil rotate according to the orientation, only one side (270deg. i think) !!
real187 said:
To use Navigon MN|7 in landscape mode, there are 2 registry mods needed:
(works for tomtom to, watch that you use the correct path/.exe and name of tomtom----audio-FIX
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Storage Card\Navigon\MobileNavigator.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: MobileNavigator
Click to expand...
Click to collapse
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Program Files\Navigator\TomTom Audio Fix.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: TomTom Audio Fix
Not sure what is wrong here.
I think you have to add tomtom itself instead of the audio fix, because the audio fix loads the tomtom app.
[Edit] Just read the previous post, apparently I'm wrong.
swinster said:
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Program Files\Navigator\TomTom Audio Fix.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: TomTom Audio Fix
Not sure what is wrong here.
Click to expand...
Click to collapse
I use a program called changescreen, it auto rotates by default but you can specifiy which apps you don't want to rotate. This works for TomTom + everything else. I didn't want to have to use an app to rotate, I'd rather have the phone take care of it but the rotate implementation on the D2 is pretty half-arsed. The reason I have to use this is because I'm left handed and tilt clockwise, htc in their infinite wisdom only tilts anticlockwise, for right handed people.
real187 said:
please correct your times one more at the battery settings (advanced).
it wil rotate according to the orientation, only one side (270deg. i think) !!
Click to expand...
Click to collapse
Tried it, but doesn't seem to work... :-(
swinster said:
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Program Files\Navigator\TomTom Audio Fix.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: TomTom Audio Fix
Not sure what is wrong here.
Click to expand...
Click to collapse
For TomTom 7, take a look here : http://forum.xda-developers.com/showthread.php?t=524473
That's works with or without tomtom audio fix ;-) !
But if you don't install audio fix... audio... will not be good !!!
Enjoy...
jcan said:
Tried it, but doesn't seem to work... :-(
Click to expand...
Click to collapse
works for me perfectly, when i change the settings is uses that settings.
do you have any third-party apps installed?
swinster said:
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: TomTom Navigator Value: \Program Files\Navigator\TomTom Navigator.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: TomTom Navigator Value: use name of process of the post above.
Not sure what is wrong here.
Click to expand...
Click to collapse
sorry i never tested this, i use G-sensor works for almost everything.
use settings above, this wil work i tried it.
infoman68 said:
For TomTom 7, take a look here : http://forum.xda-developers.com/showthread.php?t=524473
That's works with or without tomtom audio fix ;-) !
But if you don't install audio fix... audio... will not be good !!!
Enjoy...
Click to expand...
Click to collapse
Dear Real187, you could put directly process name for tom tom 7... but... thanks !!!
So, the right process name in WhiteList is : MunichWinClass
I'm having trouble with the bluetooth connection with my Audi A4 (brand new): frequently (at least once per trip) the connection is lost even though most of the time I can restart it manually.
I've read the whole "Bluetooth Car Connectrion" thread (can't post links - forum.xda-developers.com/showthread.php?t=583570) and tried all the solutions that are proposed, but without success until now...
Do you know if there is a specific problem (and solution) with the HD Mini and/or with the Audi A4?
FYI the solutions I tried:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 1085 (changes to 1081 after reset and I cannot terminate any call with this value!!)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType DWORD decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
3. Change Registry setting to your HD2\Leo phone:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add new DWORD setting called "COD" with decimal value "5374476" (Don't add the quotes).
This makes devices see the HD2 as a 'Normal' phone.
4. Navigate to HKLM\Security\Policies\Policies\
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
The only thing I haven't tried so far is to use jetware mobile. Do you think it's a working solution?
Thanks!