In Settings>Regional Settings>Region I have English (UK) but I cannot seem to change the time settings to a 24 hour format. Anyone have any suggestions? I'm hoping it's just a change to the registry in my SPV M3100.
Bri & his SPV M3100 said:
In Settings>Regional Settings>Region I have English (UK) but I cannot seem to change the time settings to a 24 hour format. Anyone have any suggestions? I'm hoping it's just a change to the registry in my SPV M3100.
Click to expand...
Click to collapse
Your answer is here:
http://forum.xda-developers.com/showthread.php?p=1166093
Mike
Related
This really strange, clocks went back on Sunday(located in UK)...my imate JAM dutifully notified me of this and adjusted my clock....my JASJAR did nothing, still on old time....all settings, Regional & Time, the same....even more peculiar, I then Activesync via Bluetooth to my PC (PC auto updates daylight savings so is on right time), synchronises fine but no time change on the JASJAR....I check settings on Activesync and "Synchronize Pocket PC Date and time upon connection" is TICKED!! Is there a setting on WM5 to tick adjust for daylight savings time? Can't find it anywhere. Anyone else had this?
Yep, same on my Exec. Seems like a glitch in WM5
my jasjar changed automatically, no problems here at all.
Flubster
Nope, mine didn't update the time 'til I plugged it into my laptop at 8am this morning (I use a slightly more pocketable phone at weekends!)
No problems for me either with my O2 Exec. Updated overnight on Sunday morning. Turned it on at 8am and there was a notification on the Today screen telling me it had changed. Didn't need to sync it.
My XDA exec didn't as well. My BA did anyway
Flubster, SiliconS, what ROM version(s) are you using?
Wiz said:
Yep, same on my Exec. Seems like a glitch in WM5
Click to expand...
Click to collapse
Works on my MDA Pro
Yep fine on mine!
I'm using the newest 1.13.53 WWE
Mart said:
Flubster, SiliconS, what ROM version(s) are you using?
Click to expand...
Click to collapse
From Control Panel:
ROM version: 1.13.48 WWE
ROM date: 09/19/05
ExtROM version: 1.13.139 WWE
Hope that means more to you than it does to me
Didn't work on my Exec. Standard out of the box ROM.
My JasJar automatically updated with no problems (by itself, not connected to the PC.) I'm still on the standard out of the box ROM.
Not a universal but my BA with WM5 updated ok in the US
My Exec didn't update either- anyone smart enough to work out why some have and some haven't?
Cheers,
Fin
Could it have something to do with what you have regional settings set to?
My Exec updated itself. Regional settings set to "English (United Kingdom)".
My didnt, although regional settings set to english
Jatt
jatt said:
My didnt, although regional settings set to english
Jatt
Click to expand...
Click to collapse
There are 13 seperate entries for English. Only 1 for UK?
jdee246 said:
jatt said:
My didnt, although regional settings set to english
Click to expand...
Click to collapse
There are 13 seperate entries for English. Only 1 for UK?
Click to expand...
Click to collapse
Mine changed and I'm on English (United Kingdom) too
Mine didn't and I'm on English (United Kingdom) too!
At the moment after a recent hard reset, the only things I've got installed on my JJ are SPB Diary, TCPMP, and Resco Explorer (+ftp & regedit).
I'm not at all bothered by this, 'cause as I said earlier, it changed as soon as I sync-ed at home, but I am mildly interested as to why it didn't adjust itself automatically. (I've probably unticked a box somewhere, knowing me?)
Hello,
Great forum. Just got my M5000 a day ago and it is already going back because of a duff battery!!
Anyway, does anyone here have a definitive list of what each CAB does and what needs to be run from the Extended_ROM after you do the soft reset hack?
Is there any benifit, or indeed can you, install the generic S/W for the JasJar?
Thanks in advance
Morituri said:
Hello,
Great forum. Just got my M5000 a day ago and it is already going back because of a duff battery!!
Anyway, does anyone here have a definitive list of what each CAB does and what needs to be run from the Extended_ROM after you do the soft reset hack?
Is there any benifit, or indeed can you, install the generic S/W for the JasJar?
Thanks in advance
Click to expand...
Click to collapse
Has anyone managed to dump the Orange rom and post it here yet, for the M5000. Had a good hunt about here but I haven't found anthing!
Southern_Man said:
Morituri said:
Hello,
Great forum. Just got my M5000 a day ago and it is already going back because of a duff battery!!
Anyway, does anyone here have a definitive list of what each CAB does and what needs to be run from the Extended_ROM after you do the soft reset hack?
Is there any benifit, or indeed can you, install the generic S/W for the JasJar?
Thanks in advance
Click to expand...
Click to collapse
Has anyone managed to dump the Orange rom and post it here yet, for the M5000. Had a good hunt about here but I haven't found anthing!
Click to expand...
Click to collapse
no yet guys , not yet ...
OK, i'm going to bump my own thread because I only have 7 days to figure out if I want to keep the M5000 or not.
Does someone with a big brain know if flashing the M5000 with the latest ROM and radio version from I-Mate and then selectively applying the extended ROM CABS makes any difference to the M5000, i.e. do you get more usable memory, is it more stable, etc. or for that matter it can even be done?
Any help would be great as I am on a tight time scale here.
Cheers
The link to the QWERTZ fix .cab is gone on this site (posted in 2004)
I want to type correctly in English on the QWERTZ keyboard layout in my O2 Trion , replacing the QWERTY standard layout provided by WM6 Black 1.0.
Would be very happy if someone canhelp this newbee?
Regedit with other values does not do the trick. Suggestions please...
Search for german imput on XDA, it' s the same of QWERTZ, I got it om my spv m3100 and it works well.
samtruman said:
Search for german imput on XDA, it' s the same of QWERTZ, I got it om my spv m3100 and it works well.
Click to expand...
Click to collapse
I can only change the regional settings, and then I got a german text "montag" which is not the option.
Resco pro keyboard install did not got further neither
Still looking for help
here is something for German QWERTZ:
http://forum.xda-developers.com/showthread.php?t=279158
Hey folks!
My Charmer (esp. MDA compact II - T-Mobile Austria) is already (more or less) unbranded. Only in Speed-Dial (and in the Call-History) it still shows a grey field with the number (resp. in- or outgoing calls) - this grey must be a rest of the T-Mobile version, but i have no idea how to change this (I've searched and tried to fix the registry, searched in the .dlls, if there are pictures, etc, etc.
Does anyone of you know how to fix this tricky thing?
Thanks a lot!
Staubsauger said:
Hey folks!
My Charmer (esp. MDA compact II - T-Mobile Austria) is already (more or less) unbranded. Only in Speed-Dial (and in the Call-History) it still shows a grey field with the number (resp. in- or outgoing calls) - this grey must be a rest of the T-Mobile version, but i have no idea how to change this (I've searched and tried to fix the registry, searched in the .dlls, if there are pictures, etc, etc.
Does anyone of you know how to fix this tricky thing?
Thanks a lot!
Click to expand...
Click to collapse
An "unusual" solution but recommended fom my side:
switch to WM6
WM6 is in my opinion much better.
brgds
Andi
Hi experts,
Can anyone tell me under today plugin how to display telco name for WM6?
Is there anyway to do so as sometimes i might need to travel between different countries.
I'm using O2 Atom Life and I don't wish to use the default plug-in.
Thanks for your help.
Regards,
kenzojoey said:
Hi experts,
Can anyone tell me under today plugin how to display telco name for WM6?
Is there anyway to do so as sometimes i might need to travel between different countries.
I'm using O2 Atom Life and I don't wish to use the default plug-in.
Thanks for your help.
Regards,
Click to expand...
Click to collapse
Pardon me, is it the service provider name is there on the screen by default? how could be yours aren't display.
It is the name of the service provider (telco).
Mine will only be shown if one of the plugin called 'date' is selected.