RADIO & Protocol missing help - JAM, MDA Compact, S100 General

my friend owns himself a JAM .. prob is ( I DONT KNOW HOW ) there is no RADIO version nor any PROTOCOL shown in device info ..2ndly when restart JAM error comes to be "NO GSM" , as a result no signals are there other then dat everythin is working fine..
i tried to upgrade it with different ROMS , there is alwayz an error
"country error this ROM is not for ur device somethin like dat"
i have tried with 3 4 ROMS ( JAM ROMS )
does anyone know how to get rid of this prob? thanx in advance

Related

My JAM write " No GSM" in the splash screen

after upgrading my JAM i got this problem " No GSM" and when the device start on windows ,, i got no phone function at all , like no radio rom inside , i tried to insall a new Radio rom , but i got upgrade error 114
Any one can help ? PLZ
Hi if i were you i'd download the official JAM Rom from Club IMate. go into bootloader mode (by pressing camera + Power + reset) and load the original Jam Rom the latest WWE Rom from club I-Mate is 1.12.
Hope this helps.
Thanks for ur fast reply .. but i already download it and try to update the official rom to my Jam but it stop and give me Error 114 and some time Error 150 and nothing go on
if i delete the radio file from the rom , it works fine and go on
Thanks
U need to go to service center , because i have the same problem and they told me i need to change the whole mother board for fixing this problem

radio keeps searching...dosen't work ...help needed..

hey ppl, my friend had bought a universal but its radio seems weired.
it keeps searching for a signal.. but dosent get anything..
a test i did :
i kept my uni under a computer CRT monitor and it disturbed the CRT monitor ..even whlie searching for a signal..(as GSM signal usually does)
His uni dosen't even disturb the computer monitor.what is it ? faulty radio or ROM ?..I've flashed numerous radio ROMS..1.09 1.15 ...ran the unlocker twice...both with successs.. ran the simunlock tool on the 1.15 with success...but no effect..
its still searching... the sim works on my phone so its not faulty..
any ideas ?
its an orange SPV m5000
I flashed it with
with 2.50.00 WWE WM5 ROM (from xda-developers a while back..i don't know whos was it(maybe helmi)
BootLoader 1.01
Radio 1.15.00
edit :
using mtty i just did the task 55aa thingy and it formatted the system
then i did the rtask 0 thingy to reset the radio..
then flashed it with thingonaspring wm6 rom with 1.15.00 radio ..successfully i may add.
still searching ... searching...and on manual network mode it's just stuck on the dialogue which says 'getting network settings' or something..
i'm beginning to think hardware of radio is damaged ..any ideas..please help ..

How to reflash rom by micro SD

Hi
I try to reflash my touch dual from NL to CHT, but.....
It looks I forgot to unlock the CID and the reflash programe has stopped on 14%, after that I only can get in the "3 color screen" ...
I try to down a lot of different version Niki's ROM ( also tried 'wizard_romupgradeutility_noid' ) but all of them has hand on 1% or even just report the Erroe [294] : invelue Ventor ID ...
As I learn from xda, it looks only reflash the ROM by miro SD can solve my problem, but I can't found any information regarding how to make the reflash function micro SD for NIKI ....
Anybody can help ..... :'(
Please ...... anybody can help....
As far as i know, you can't reflash your rom by microsd. The only option you have is to wait until valvarin has finished his unbricker. Still, I don't know when the unbricker is finished. Sorry for the bad news. Maybe the gurus have an idea. Keep your hopes high and succes!
What I can do now ???
At this moment, my touch dual only can start to "3 color screen" mode, and also can strat a ROM reflash programme but never can be 100% finish... ( Erroe [294] : invelue Ventor ID / system hang ) ...
Or is possible if I flash back the original ROM ???
Does anybody have the original HTC Dutch ROM from T-mobile ???
Reflash from rom
Hi , I have the same problem also would like to reflash from the sd card as my hermes 200 freezes on the win start screen , still running windows 5 . Hard reset does not work , just back to win start screen . Please let me know if you have some success . Thanks
http://forum.xda-developers.com/showthread.php?t=495262

help plzzzzzzzzzzzzzzzzzzzzzzzz

hello all
i have i-mate jasjam its proplem is no gsm
i tried alot for flashing the radio bymany verions but it stoped and when i tried t flashing it by many roms and also the original rom it stoped on the step gsm
and if i flahed it by any rom wihout the radio it completes but with no gsm
i hope to find a resolve to this prop plz to make my phone alife again
thx for u all
This is maybe problem with hardware ! better to you go in service,bcs if you flashed with original rom and radio,he must to work 100%
thz alot for help but i need a solution do it by myself thx
Hi, can you please write down what is on the bootloader screen ?
hi aze2learn thx for trying help me
ok
on the boot loader screen
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
thx alot aze2learn
Well, since you already have hardspl 2.10-Olipro, please make sure you flash WM6 (green welcome screen) or above because WM5 (blue welcome screen) for sure will make the device show 'No GSM' if it writes an old radio version. Try original rom for your device here first : http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
It is recommended to use radio version (GSM) from your carrier. You can also try other radio (if you want to) from here : http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms . Some say 1.47.30.10 is the best in terms of power consumption but maybe not suitable for others (depends on carrier/geography)
Note : Only original ROMs from HTC/carrier have radio. Cooked roms don't include radio.
All the best
ps : Only HardSPLed device will allow flashing extracted radio rom. Stock SPL will stop the device from flashing.
ok man thx alot i will try and i will tell u but tell me how to flashing it by pc or by sd
thx
Try RUU first (flashing through pc using usb cable) but if you're having problem such as error 260 (no connection), you can use sdcard method since you already HardSPL your device
ps: sdcard method only works on FAT32 filesystem and non-SDHC microsd.
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
mony_nana said:
i tried during the pc and it gives me error 262
and i tied during the sd stoped on gsm step
i dont know what to do??????!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi,
Extract RUU_inside.exe (use winrar or 7zip) RUU_inside.exe is in the original HTC ROM package ... get the RUU_signed.nbh and put into a new folder.
Then use RUUWrapper from here : http://forum.xda-developers.com/showthread.php?t=298737 and put it in the same folder with RUU_signed.nbh
Boot the device in bootloader mode. In RUUWrapper, tick 2.10 (new bootloader) and is it Hard-SPL. Follow the instruction.
All the best
ps : please check your PM
hi man
its stoped again on 11%
my mind will be pumped and i dont know what to do
i do everything i think
i will be crazy
maybe your battery drained out already? if so, try turn off the phone, charge it for 30 mins and try again.
ps: have you read your PM?
its already full charged
Please don't worry too much. Since your device already HardSPL, your device can still be revive.
i hope it will be aliveagain but how?
i am too tired from searching on the internet about this prop
and i didnt get any resolve for it
i think u have mor experiance than me and u can search more deeper than me
i will be here tmorrow maybe u can find a selution
i am from egypt and u ?
I'm from Malaysia (GMT+8) and please read your private message. I would really love to help but I need extra info such as what OS are you using, what happen before you got into trouble,etc.

[help] BLACKSTONE - "SIM card is missing" messege. wtf?

hello good people of xda
i realy need your help
my HD shows the messege
" The SIM card is mising
You can still make emergncy phone calls if your
Service provider Supports it "
{and it seems lik's he want's me to enter some sort of code
there are ****** when i tap the numbers }
[ i cant make emergncy Phone calls]
The problem started after i Hard Reset the device.
tried allredy 6 SIM's from diffrent operators - didnt work
could it be a hardware prob?
Details:
Radio: 1.17.25.09
PROTOCOL VERSION : 52.69.25.37u
HSPL 1.56
ROM: STONEhenge WWE
plz help...
have you tried flashing a stock rom? maybe your current rom is causing the problem. If that doesn't work, it is most likely a hardwareproblem
i flashed a stock rom.. didnt work :/
i will go to a lab check

Categories

Resources