Related
I'm not sure if this is normal or not. I just got my Cingular 8125 and the wifi is very slow. I don't know how to measure the actual speed but for instance on my broadband connection, going to Google.com opens up in about a second. On dial up it takes about 5 seconds. However, on my phone using wifi, it takes about 20 seconds. When using wifi on my laptop, it is comparable to my broadband speeds my router is connected to.
I have pretty slow GPRS service as well and wifi is comparable.
I get the same slow speed on 802.11b as well as 802.11g networks (g network with registry hack)
Is this normal? The wifi speeds with the unit brand new out of the box was very slow. I flashed the rom and even overclocked to 240, the wifi internet is still painfully slow. I don't really find this useable. If I go to a page with images and such it can take a minute or so.
Anyone have any suggestions? Are others getting good speed on wifi. I tested by watching a streaming video and the speed shown on the bottom of windows media was 18k.
Were my expectations too high? Is there a setting I have incorrect?
IdeaDirect said:
I'm not sure if this is normal or not. I just got my Cingular 8125 and the wifi is very slow. I don't know how to measure the actual speed but for instance on my broadband connection, going to Google.com opens up in about a second. On dial up it takes about 5 seconds. However, on my phone using wifi, it takes about 20 seconds. When using wifi on my laptop, it is comparable to my broadband speeds my router is connected to.
I have pretty slow GPRS service as well and wifi is comparable.
I get the same slow speed on 802.11b as well as 802.11g networks (g network with registry hack)
Is this normal? The wifi speeds with the unit brand new out of the box was very slow. I flashed the rom and even overclocked to 240, the wifi internet is still painfully slow. I don't really find this useable. If I go to a page with images and such it can take a minute or so.
Anyone have any suggestions? Are others getting good speed on wifi. I tested by watching a streaming video and the speed shown on the bottom of windows media was 18k.
Were my expectations too high? Is there a setting I have incorrect?
Click to expand...
Click to collapse
Always best to be sure that you are actually using the wifi connection - Try disconnecting the gprs first before you connect to wifi. I have an issue where if I leave my gprs connection enabled all the time it takes precedence over my wifi no matter what.
Bratag said:
Always best to be sure that you are actually using the wifi connection - Try disconnecting the gprs first before you connect to wifi. I have an issue where if I leave my gprs connection enabled all the time it takes precedence over my wifi no matter what.
Click to expand...
Click to collapse
Tried that but still no luck. When connected by wifi, I see the little wifi icon on the title bar. When connecting to GPRS, it shows the E and actually a pop-up saying it is connecting to GPRS. This part is actually working great. Uses wifi by default when wifi is on and GPRS is not.
I did try to disable GPRS entirely but still get the same slow results.
I also changed the wifi setting to maximize performance instead of save battery life. Didn't seem to matter.
I may experiment with Opera Mini or something to see if I can get some improved speeds.
no problems with wifi here. getting a faster connection than GPRS, even at hotspots.
I had a problem with my wifi connection in that the DHCP server giving out an incorrect address for one of the DNS servers. This made the wifi slow, because Internet Explorer kept on trying to lookup the IP of a host using the broken DNS, and then falling back to the second in the list.
You try specifying a DNS server manually to diagnose the problem.
Cingular 8125 WiFi Fix that works!
Believe it or not the support for this product from HTC, the mfgr, is great and fast! That being said, I like most users have spent days hunting for solutions to the problem and you will not find them anywhere. But here is the solution:
First you must have an unlimited account for data usage or forget your WiFi...well at least simply. Also, you must get Cingular to flip a switch for your 8125 to automatically switch from WiFi to GPRS and back depending on what is the best signal. It works great once the switch is set.
The only way I found to do this was to call support and make sure you get to the HTC support group. They will guide you quickly through getting setup but you must tell them about the switch so they call Cingular and have the switch set. For some reason Cingular, no surprise, does not seem to know about this when they sell you the plan and the phone.
Re: Cingular 8125 WiFi Fix that works!
mostinc said:
Believe it or not the support for this product from HTC, the mfgr, is great and fast! That being said, I like most users have spent days hunting for solutions to the problem and you will not find them anywhere. But here is the solution:
First you must have an unlimited account for data usage or forget your WiFi...well at least simply. Also, you must get Cingular to flip a switch for your 8125 to automatically switch from WiFi to GPRS and back depending on what is the best signal. It works great once the switch is set.
The only way I found to do this was to call support and make sure you get to the HTC support group. They will guide you quickly through getting setup but you must tell them about the switch so they call Cingular and have the switch set. For some reason Cingular, no surprise, does not seem to know about this when they sell you the plan and the phone.
Click to expand...
Click to collapse
Thank you so much. This sounds like the solution I'm looking for. So are you saying to call HTC support and they will contact Cingular to have the switch set on my behalf?? Or do I just call Cingular and tell them to "turn the switch on"?
I do have an unlimited GPRS for data usage.
what a crock of steaming brown stuff :x .... what exactly does wifi have to do with your telco? ... nothing. There maybe some registry entry that Cingular have set when the device ships which causes poor WiFi speeds but your GPRS data plan has nothing to do with WiFi data, unless you are talking about connecting to Cingular WiFi hotspots. The only changes needed will be on your device not within the Telco network.
before calling support, try this:
Go to comm mgr and turn off the phone. Then turn on WiFi and let it connect. Check your speed with www.2wire.com. If your speed is still slow, and another PC connected to that HotSpot isn't (test the PC with 2wire also) then your 8125 is bad.
Using the WiFi icon v.s. the "E" icon is no way to determine what wireless system you're using btw...
Sleuth255 said:
before calling support, try this:
Go to comm mgr and turn off the phone. Then turn on WiFi and let it connect. Check your speed with www.2wire.com. If your speed is still slow, and another PC connected to that HotSpot isn't (test the PC with 2wire also) then your 8125 is bad.
Using the WiFi icon v.s. the "E" icon is no way to determine what wireless system you're using btw...
Click to expand...
Click to collapse
Ok, I tried 2wire. My laptop connected to my wifi network and clocks in at 3.2Mbps and my 8125 is showing 221 kbps. multiple tests showed 228, 205, 220). Perhaps it is unrealistic to expect similar speed as my laptop.
I turned the com manager phone back on and connected via GPRS and the speed test came back at 64.8 kbps.
So it does look like this method is working. I can live with 221 kbps.
By the way, I emailed Cingular and HTS. I got the following response from Cingular:
Thank you for contacting Data Support!
There is an additional setting that you need to enable/disable manually every time you switch between GPRS and Wi Fi, please take a look at it:
[they sent a link to a page not found]
Click to expand...
Click to collapse
I think it's always going to be slow because of the way the phone is designed. Probably small bus interface. My friend has a 6700 wich cpu wise is pretty much the same based on comparison but his is much faster through wifi.
"I think it's always going to be slow because of the way the phone is designed. Probably small bus interface. My friend has a 6700 wich cpu wise is pretty much the same based on comparison but his is much faster through wifi."
No no no no no no and no.
small bus interface? for heavens sake... you have heard that there is something called a "bus" inside computers and that it is used to "transfer data" and this "bus interface" is small in the qtek so it is a viable candidate to blame slow transfers on.
no.
any memory bus designed after 1980 is capable of 200kbit transfers.
the main reason for the horrid speed of the 9100 is the stupid software design where every system call in a program gets interrupted by the os which in turn, after checking who-knows-what, in the name of "security" and "stability", and then executed. Of course this hinders performance dramaticaly without affecting stability and security a single bit: it still crashes. the difference is that it is also slow.
I'm running Xelencin's custom 2.17 ROM for T-mobile on my 8125. His ROM sets the device up to work with an 802.11 g wifi connection. I kid you not - I have measured 900 to 1200 Kbps on my wifi at home (comcast) and at work (T1). It's blazing fast.
To measure your speed, go to www.dslreports.com. Click on the lowfi version at the top of the page. Then click on speed test. Then choose either 600K or 1 MB and then let it do the test.
You may have some setting wrong.
I have an 'adhoc' wireless network (running at 11Mbs) and i stream large lossless (FLAC) audio files to my Squeezebox 3 wireless music player with no issues whatsoever.
However, the MDA can't cope at all. FLAC files play great from the MiniSD, but wifi performance is worse than terrible.
Yes, the wifi speed of the MDA is s**t.
That said, if anyone has any tips on how to increase perfomance please let me know!
Thanks.
My Wifi would not work at all when I updated my ROM but this utility fixed that and sped things up. I recommend backing up your device before executing because I have only tried this on QTEK 9100 with a beta 2.8 ROM.
tsiros said:
"I think it's always going to be slow because of the way the phone is designed. Probably small bus interface. My friend has a 6700 wich cpu wise is pretty much the same based on comparison but his is much faster through wifi."
No no no no no no and no.
small bus interface? for heavens sake... you have heard that there is something called a "bus" inside computers and that it is used to "transfer data" and this "bus interface" is small in the qtek so it is a viable candidate to blame slow transfers on.
no.
any memory bus designed after 1980 is capable of 200kbit transfers.
the main reason for the horrid speed of the 9100 is the stupid software design where every system call in a program gets interrupted by the os which in turn, after checking who-knows-what, in the name of "security" and "stability", and then executed. Of course this hinders performance dramaticaly without affecting stability and security a single bit: it still crashes. the difference is that it is also slow.
Click to expand...
Click to collapse
Excuse me for my ignorance... But then how do you explain that the 6700 can handle 700kb wireless while 9100's usually around 220kB? The Intel proc on the 6700 seems comparable to the Omap,no?
keitht said:
My Wifi would not work at all when I updated my ROM but this utility fixed that and sped things up. I recommend backing up your device before executing because I have only tried this on QTEK 9100 with a beta 2.8 ROM.
Click to expand...
Click to collapse
What exactly does this cab change?
Reconfiguring DNS may make a significant improvement?
I came across your post after my own concerns with my I-mate K-Jam (Wizard) WiFi performance. My GPRS connection was at least twice as fast.
My problem was that is was taking at least 30~60 seconds to locate a web page and another 10~15 seconds to open the page. Once connected it seemed to work OK but operation via GPRS was still faster.
My K-Jam has a ROM that permits G connection and my AP is set to G only. After reading all the articles in this post (and others), I ran the 600K download at DLSreports.com. To my surprise, my download rate was actually + 500kbit/sec which lead me to believe I might have DNS issues.
I used vxUtil (http://www.cam.com/windowsce.html) to check my DNS settings. My primary DNS being picked up from my DSL modem was the DSL modems gateway address which works fine in my Toshiba laptop. My secondary DNS was my ISP's backup.
I reconfigured my DSL modems DHCP server so that the DNS servers being dished up to my K-Jam are my ISP's primary and secondary servers and I performed a soft reset.
The speed increase was substantial! Pages are located and opened within 5 seconds now making my WiFi connection useable.
This may be worth a try for others with similar issues?
Did anyone else notice this registry entry?
[HKLM\Comm\TIACXWLN1\Params]
"EnableElpMode"=dword:00000000
If I'm not mistaken, the TyTn has a TI ACX100 WiFi chip, and this chip has TI's "Enhanced Low Power(tm) Technology". I've enabled it on my TyTn, and so far it seems to do no harm. I'll have to see if my battery power improves over the next week.
Correction...
Ah, the htc TyTn has TI's TNETW1250 chip. My mistake.
In any case, I think the EnableElpMode (if it really does work) would be a good thing. Also, I've seen a few webpages suggesting an additional key:
"dot11SupportedRateMaskG"=dword:00000008
Apparently this key tells the driver it's okay to do any 802.11g speed. I'm going to go find out!
let us know how it goes....
1st set of test results
First, I should detail the equipment I'm using.
My wifi router: D-Link 624.
My phone: htc TyTn, QTEK ROM 1.35.255.2 (Radio 1.18.00.10)
My laptop: IBM Thinkpad T22, w/ Hawking Techmologies HWC54D wifi card, Win2k.
My PC: P4 2.4GHz, asus P4P800 (has Gb lan), WinXP.
Results so far: (using http://www.bandwidthplace.com/speedtest, and sitting right next to my DI624)
PC: 5.3 Mb/s
Laptop (w/wifi): 3.4 Mb/s
TyTn: ~250 kb/s
Notes:
In one test I set the DI624 to use 802.11g only. Without any registry tweaks, the TyTn connected up just fine. Therefore, I suspect that the dot11SupportedRateMaskG key is no longer needed.
Curious to see if I could boost the TyTn's wifi speed, I began fiddling with all of the different registry settings under that heading (listed above). The wifi speed always hovered in the 250 kb/s range. It seems as though none of those settings significantly changed the wifi speed.
There was one key that did make a big difference in the time it take to actually connect up to the wifi router. Setting "dot11ShortPreambleInvoked" to 1 greatly sped up the time from wifi-off to wifi-connected-and-ready. (My DI624 was also configured for a short preamble.) Without the short preamble, it was taking between 10-30 seconds for the TyTn to connect up. With the short preamble it's between 5-10 seconds.
(Side note: The "Testmode" key didn't seem to do anything - at least I didn't see any difference when I set that to 1.)
One other key that did make a small difference:
[HKLM\Comm\Tcpip\Params]
"TCPWindowSize"=65536
I played around with this key, and it seems like setting it to 4096 "optimized" it just a bit. I got around 270 kb/s with that setting. Setting it bigger (say, 256k) slowed things down (~240 kb/s), while setting it smaller (say, 1k) really slowed things down (~170 kb/s!).
I'm going to continue fiddling around with the settings and report back again. It just seems to me that the TyTn should be able to achieve a wifi speed at least above 1 Mb/s. I would appreciate it if everyone else would check their wifi speed and post the results here as well.
p.s. If anyone knows of a PocketPC utility that can show detailed wifi connection information (such as speed, frequency, protocol, etc.) please let me know!
250 kpbs, that cant be correct? can it?
that would mean that HSDPA is faster than hermes wifi? I will test mine when my wife gives it back to me, im grounded for the holiday season. lol
something is terribly wrong here......
yes, there is something wrong here... I think you need to turn on flight mode before you run your wireless test again, and here is why... On my phone i have my data connection set to always on. If i turn on wifi then my data connection doesnt disconnect and will result in low speeds since its not using the wifi. If i turn mine on flight mode then run tests then everything is good. Here is my results using the same site as the OP
PC = 1.9
phone = 1.4
I am using a 3meg adsl pipe with a wireless SMC router with mac filtering, regular wep, and a static set up on the LAN side.
Progress!
I changed my wifi speed test to: http://www.dslreports.com/mspeed
Surprisingly, that speed test reported 1647 kb/s for my TyTn!
Fiddling with the TCPWindowSize value, it seems that 64k is optimum - well, at least with the dslreports test.
i usually use dsl reports, but i wanted to maintain some kind of constant for your testing
Wireless settings / b-g connections
Hi, I;ve just got a TyTn but it won't connect to my Netgear 802.11g router?? Is it b-only? Is there a hack (like for the Universal) which would enable me to connect to g networks? Would I still be able to connect to b-networks?
Thanks!
motoroller said:
I;ve just got a TyTn but it won't connect to my Netgear 802.11g router??
Click to expand...
Click to collapse
My TyTn is fairly new (bought last month) and I can configure my DI624 to 802.11g only, and connect up just fine. What ROM version does your TyTn have? I'm on the QTEK 1.35.255.2 ROM. If you TyTn is right-out-of-the-box, it's probably got the QTEK 1.18.xxx.x. If that's so, you should consider unlocking it and upgrading it to one of the latest ROMs.
motoroller said:
Is it b-only?
Click to expand...
Click to collapse
The htc TyTn (Hermes) has the TI TNETW1250 wifi chip. This chip is 802.11g capable.
motoroller said:
Is there a hack (like for the Universal) which would enable me to connect to g networks?
Click to expand...
Click to collapse
You can try adding this registry key (although I'm not sure it will do anything on the TyTn):
[HKLM\Comm\TIACXWLN1\Params]
"dot11SupportedRateMaskG"=dword:00000008
motoroller said:
Would I still be able to connect to b-networks?
Click to expand...
Click to collapse
Yes. Wifi chips that support 802.11g always support 802.11b (AFAIK).
Good luck!
shogunmark said:
i usually use dsl reports, but i wanted to maintain some kind of constant for your testing
Click to expand...
Click to collapse
Yeah, after checking out several speed test websites, I'm beginning to doubt the one on bandwidthplace. Actually, while testing out several other speed test websites using my PC, I've gotten a smattering of different speeds reported. Most seemed to be within reason and about what I expected, but a few were either obviously too slow or absurdly too high. (Ony reported above 100 Mb/s downstream, even though my cable modem is a DCM-202!) The dslreport site seemed to be believable to me, so I'm sticking with it for now.
If it makes you feel better i work for AT&T in the DSL maintenance department and have for 6 years.. anytime i have anyone that reports slow speed issues i always take them to dslreports and use those speedtests.. they seem to be the most reliable that i have found..
Okay, I'll trust dslreports' speed test then!
So now the question is: Does a wifi speed of ~1600 kb/s sound "right" for the TyTn?
What makes me wonder is that when I run the dslreports speed test on my laptop via wifi, I get ~3.2 Mb/s. So I know my DI624 can pump out the bits! (Well, for 802.11g's max of 54 Mb/s, that's still kinna lame.)
I've pretty much exhausted all of the registry settings I can find. Got any others I can/should look into?
there are other things you need to take into account, the processor, the amount of ram, etc.. when you run a speed test it rely's on your pc to process the information as it comes down the pipe... if you really wanted to test it you could build a pc that resembled the phones specs and run a speed test and see what you get.. i would make a bet that it would resemble the same results
Do you know any registry key to improve the wifi trasnimt power?
onlineemails said:
Do you know any registry key to improve the wifi trasnimt power?
Click to expand...
Click to collapse
have you already went to settings>connections>wireless lan>power mode tab and changed the slider to best performance?
did it but no effects
Wi-Fi Reg Setting
I went through this post and compared the results to waht I have right now! Not too encouraging!
I have a 4MB connection rated at average to be a 3.5MB at www.speakeasy.net/speedtest using the New York Host!
Wi-Fi Reg Setting
I went through this post and compared the results to waht I have right now! Not too encouraging!
I have a 4MB connection rated at average to be a 3.5MB at www.speakeasy.net/speedtest using the New York Host!
I run a WRT54G with upgraded firmware downloaded from kinksys. Before that the damn thing wouldn't even connect to my TYTN.
Right now I am getting connection speeds through WiFi between 650kbps and 1200 kbps according to www.2wire.com speed test.
I have a Dopod 838Pro bought in HK in November to which I didn't do a Thing yet!
Cheers
Is 1.6 Mb/s the best TyTn can do?
Well I've fiddled with all the registry settings I could possibly fiddle with, and dslreports won't show anything above 1.6 Mb/s for on my TyTn (using PIE).
Has anyone gotten anything higher with their TyTn?
I have had two different HTC Fuze devices now and have noticed that the WiFi performance seems to be rather slow. I have a 54mbps wireless network setup I believe (I use wired Gigabit ethernet for my PCs, WHS & Media Streamer), yet the only difference in speeds I notice between my WiFi network and AT&T's 3G seem to be better latency on WiFi. I have tried all 3 different WiFi settings in Windows Mobile, Performance/Balanced/BatterySave, and they don't seem to make much difference.
Now, as far as Opera Mobile goes, the poor speed can probably be attributed to the browser's rendering engine and the device's hardware, but my real complaint here is with the RSS reader I use, Spb Insight. I have 58 feeds set up, and it took it about 30-35 minutes to download 42.7~ MB of data over my WiFi network. I realize this isn't too bad, all things considered, but my Comcast cable connection is 20 mbps downlink, and if I were to download 42 megs of data on my desktop PC, we'd be looking at around 21 seconds (max transfer of ~2.11 MB/sec, tested on GigaNews USENET servers).
So my question is, assuming the bottleneck isn't the Spb Insight RSS Reader software, which I don't think it is, are there any registry changes/hacks or software I can use to get a bit better speed out of the Fuze's WiFi radio? I am running the stock AT&T ROM with the workaround that bypasses the AT&T BloatWare Install and my radio is stock also. I did a few forum searches and didn't come up with much of anything, and nothing Fuze related.
Is anyone else noticing slower-than-expected/desired WiFi speeds on their Fuze?
-- As an aside, I noted earlier I have a Media Streamer box - basically a dedicated small Shuttle brand PC box that I stuck a dual-core Celeron into that's only function is to transcode & stream videos via the Orb Software. I used a Seinfeld episode xvid @ 576x432 resolution that plays near-perfect, a frame-skip here and there (and looks gorgeous, I might add) on the Fuze using CorePlayer v1.2.5, but when I stream those same videos off my streamer box (transcoded into WMV) using Orb over WiFi, they're nearly unwatchable from all the hiccups and audio sync issues. I haven't even bothered trying it using 3G, since it can't even manage it over wireless. These videos streamed without any issue to my Archos 5 60GB Internet Media Tablet and Nokia N810 IT, both devices I've since sold, as the HTC Fuze replaces both without much issue, although the 600MHz ARM Cortex A8 + Graphics Chip in the Archos was a monster, eating webpages for breakfast & outputting 720p video to HDTV with nary a frameskip to be seen. They need to get those Cortex procs into mobile phones ASAP.
In any case, it seems like the WiFi is hindering me in this regard as well and I'd very much like to get this all ironed out so I can rest easy knowing my Fuze does everything I want it to. Sorry for the long-winded post, and a big thank you to all the contributors here for the amazing wealth of knowledge on these forums.
Try to change your radio stack, check for WLAN setup utilities to lock your transfer speed at 54 and try to make a WiFi connection with your PC to make sure it is not your router who makes lags
I noticed that the range of the Fuze's wi-fi is very limited. Anyone else notice this??
Having only used the Sprint TP, I didn't notice any specific issues with WiFi. Have you verified that all of the connection settings are properly configured? (wifi connects to internet instead of work network and your applications are set to use 'the internet' instead of 'MEdia Net') Then again, the stock Fuze ROM could very well just suck as most ATT HTC ROMs usually do
When I first bought the touch HD I was thinking how good it would be to have this phone while having wifi with the lack of 3g for tmobile in the us, but it turns out that the wifi acutally suck! I have a iPod touch 2g And the wifi works great with blazing speed. I can't seem to detect my wifi at home mean while I'm connected on my wifi with my iPod. I been very disappoint with this phone for simple fact that this phone recieves wifi poorly. Anyone can help me out with this problem would be much appreciated because despite the wifi problem I love the phone cause the 3.8 screen is so damn sexual lol.
I've no such issues!
Try to set wifi power options to performance. Also, Enabling G Mode (with SKTools is one of the ways) helps improve speed.
Thanks for the info but it might be the lack of range of my router cause I have been on my wifi with the phone before but I get disconnected frequently and most the time it doesn't even show up or detect it but I don't have that problem with the iPod. With iPod I seem to get wifi everywhere. I'm starting to believe the iPod is better might sell it and get a iPhone or maybe a hero but don't know if I'm willing to spend 600+ on another phone
Next time put [rant] on the title
My wifi connects well to open, WEP, and WPA connections. I tried numerous access points (at least 30), even 802.11n APs in mixed g mode. It even connects to Apple Airport (802.11g). The connection is stable both on power saving and best performance, but I think I get much better speeds on average with best performance.
Its wifi range is much better than my little HP 613 smartphone, but again worse than my notebook. I get 54Mbit connection with signal quality of about 50% at 10 meters through a wall and then it automatically finds another channel on another AP. It roams (handover) APs better than some Lenovo r61 laptops around!
But I am not satisfied with its speed (even on best performance) - it finishes copying a 700MB file on a 54 Mbit connection in 30-40 minutes using total commander and saving on storage card. That means average speed is around 300-400KB/s - laptop does the same (same AP, same file, same network settings) at 1.6-1.8 MB/s in around 7 minutes.
I also noticed that saving on storage card is slighty faster than into the main memory...
I can't seem to detect my wifi at home mean while I'm connected on my wifi with my iPod.
Click to expand...
Click to collapse
Hmm, are you sure that you don't compare two different situations ? Did you also try connecting to Wifi with your iPod while already being connected with your Blackstone ?
My personal experience shows me that the Touch HD seems to have a better radio than the iPhone 3G. Have you upgraded to the latest Blackstone stock ROM and radio available on the HTC website or XDA Devs ? Whether or not the radio also affects Wifi unfortunately I don't know.
Moreover, use WifiMonster to monitor the strength of the signal, it'll help you discover the best spots for using Wifi. I even receive Wifi signals from the neighbors' houses in my own house (not speaking about appartments), of course that always depends on the room !
BTW I'm pretty sure that a Hero won't solve your problem, it's the same old hardware specs as on the Blackstone.
The Wifi on my device works perfectly and i have had no issues at all with signal or quality. I have had more problems with my ipod than the HTC, are you sure its not the WIFI AP you are trying to connect to? Also are you using stock rom or custom?
I'm using the Energy ROM. I'm assume its my wifi signal its very weak and my touch hd cant seem to detect it. With my ipod i shows up and i can connect to it...will updating the radio make a difference?
I came across a startling discovery the other day regarding the Touch HD wifi. I was also having issues at home with weak wifi signal. I didn’t seem to have this problem with public access hot spots.
I have a Logitech wireless mouse connected to my computer and very rarely turn that computer off. I found that when my computer was off I would get a rock solid connection to my home wifi, but when the computer was on it would drop in and out. I narrowed it down to the wireless mouse was interfering with the Touch HD wifi connection.
I tried all different channels on my router, but as long as the Logitech mouse was plugged it I would get wifi dropouts. But as soon as I unplugged the mouse and the radio dongle, I wouldn’t have any problems with the Touch HD wifi.
I can’t comment if this is your issue, but something might be interfering in the 2.4Ghz with wifi.
Guys,
Sometimes even cordless phones, microwaves, etc will interfere with the connection.
Cheers.
As Poison Wolf correctly pointed out, other household items can interfere with the wireless frequency. Try changing the channel that's being used to transmit from your box (This will involve changing some settings on your wireless router so do some research before you fiddle around with it) I have had to do this before and can confirm it can make a massive difference.
ikovac said:
But I am not satisfied with its speed (even on best performance) - it finishes copying a 700MB file on a 54 Mbit connection in 30-40 minutes using total commander and saving on storage card. That means average speed is around 300-400KB/s - laptop does the same (same AP, same file, same network settings) at 1.6-1.8 MB/s in around 7 minutes.
I also noticed that saving on storage card is slighty faster than into the main memory...
Click to expand...
Click to collapse
Everybody has this problem because the card seems not capable of more speed.
But it seems nearly nobody cares.
My old thread about his, no answers:
http://forum.xda-developers.com/showthread.php?t=524272
str0nz0 said:
Everybody has this problem because the card seems not capable of more speed.
But it seems nearly nobody cares.
My old thread about his, no answers:
http://forum.xda-developers.com/showthread.php?t=524272
Click to expand...
Click to collapse
Stron,
Hmm, interesting. The only reasoning I can think of is that perhaps there's a limiting factor in order to reduce the heat or something? I don't see why they would cap the speeds.
Cheers.
What if it is capable of connecting at 54 Mbit, but can actually do only 11 Mbit? Nice trick. I hope it is just a bad idea.
Hello,
i'd like to know if any of you is experiencing wifi speed issue with the OP2.
Let me specify i'm having the same issue regardless of the rom, stock or CM12 based.
I've got a 20Mbit/s connection at home. Speedtest run from PC, laptop, and other phones shows consistent results, very close to the 20Mbit limit.
On the OP2 i can't get over 4-5 Mbit/s
I've searched for the forum before posting, found a few complaints but no solution.
On the web, i've found some advices to try to change the 802.11 radio speed from Router settings. I've tried it, but no solution.
I can't guess where the OP2 limit / issue comes from.
Any hint will be really appreciated.
I thought it would make sense post that after 24h studying the issue it SEEMS i finally fix it.
After a lot of testing with changes of the wi-fi settings phone size and router side, it seems that what actually solved my issue was to set the correct MTU size in the router options for pppoe connections. It was for some reason 1476, i've set it to 1492 as recommended for the pppoe protocol.
I've no clue how MTU size can affect speed and performance only on a single device of all the connected ones: i would have expect the same speed issue would affect my laptop and my pc too. So, i'm honestly not sure which is the relationship. Fact is, since i changed MTU size, OP2 goes at maximum speed allowed by my connection as well as the other devices on the network.