Hi,
I've upgraded my ROM to the ROM submitted by:
http://forum.xda-developers.com/showthread.php?p=1248585#post1248585
I found it' s not that good, and tried to change back, but got some problems:
When I try to upgrade to the old version it's can not go through...
I've tried all method, not working...
Some strange things:
If I press the soft reset, the O2 goes to bootloader mode immediatly
If the SD card in can not get USB mode in bootloader.
Any idea how to change back??
thx a lot!
Related
I got trouble - I tell you....
Yesterday, I wanted to update my T-mobile MDA from winmobile 2002 to 2003. I was using "Lumpistefans" -Romkitchen (xda.weblink.net). I choose the rom to be coocked as an "installer exe".
When I performed the update, everything worked fine - for about 30 secs....then brakedown
This message accoured "Can not open COM/USB port...."
from this time on, my mda seems to be toasted!! I can't switch it on , softreset won't work - and after an hardreset the display only shows some black stripes and two blank squares at the top half.
I don't need to mention, that Activesync isn't recognising the mda anymore - saying "uknown usb device - can't connect"
I don't think the Bootloader is working still either - by pressing the on/off button, the bootloader should be activated ..or??!? I never tried that before.
I read the thread "rom flashing is dangerous" but didn't get any helpfull info on my case.
I need Help...getting quiet despered!!
THANKS for alls Help , Hints and comments!!!!!
ciao
mark
here is how you enter the bootloader
http://xda-developers.com/bootloader/
ok thanks - the bootloader is still working ... can i now just flash it with a rom using my sd card?
yes just plug in the sdcard of min 64MB into your sdcard writer/reader and use xdatools to flash the nbf or nb1 file to the card
and put in the sdcard and go back into the bootloader
I just got my Mini S and it is a BRICK! All it does is go straight to bootloader upon booting... So i can't use the updater that's available.
Even if i do a hard reset, it goes straight back to bootloader. Somebody help, please!
where did you get it from?
was it a brick when you got it? if so compain and send it back
or have you done something to make it a brick?
I received it as such, but would prefer to fix it myself- its just different than other smartphones in that you can't load a rom image on it when it is in bootloader.
anyone have suggestions?
somehow get a Rom on to a Mini SD card and restore it thou the boot loader
if you know someone with a Vario then could put a mini SD card in it and back up the rom
Hello timothyadam,
yesterday my "mini s" was also dead (no booting os!), but:
when you are in the screen with the three colors (press Voice and camera Button and then reset) and you have connect the mini s via usb cable (in the left down corner you must see USB) then you can click the exe (imate or qtek prodigy file) and this work.
Regards
I've tried that, but since the K-Jam rom update only works when the device isn't in bootloader, i can't get it to recognize the device...
I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.
hello,
since yesterday I cannot boot my X1 anymore.
Rebooting starts, then I get the screen where I have to enter a security code (thanks to my company`s security policies...) and I cannot enter values there. After a few seconds it stops booting. So I cannot proceed
Only option I see is to reinstall ROM/firmware.
My laptop cannot see the X1 via USB because it is not up and running, so I cannot move data/new ROM to the microSD.
Is there a Software/firmware/ROM-updates available (prefered: WM6.5 German, or at least WM6.1) which can be started/run from my laptop?
I couldnt find a download link to VodafoneGerman WM6.1 here
http://wiki.xda-developers.com/index.php?pagename=HTC_Kovsky_Shipped_Roms
thank you
Raggi
If you have soft SPL, you should be able to get into boot logger screen and update it thru the SE site/program.
Other option.. is there a card reader/adapter that fits the micro SD card for you to copy the ROM?
Edit: Does hard reset work at all?
hard reset doesnt work unfortunately.
Dont have soft SPL installed
my cardreader doesnt support microSD, so I guess I first have to buy a new one
is this the latest official Vodafone Germany WM61 ROM?
GENERIC deutsch DE (1.03.938.9) R2AA006
http://forum.xda-developers.com/showthread.php?t=477801
Now I called Vodafone Business SUpport and they dont have a link for me....
Try the following:
Enter bootloader (press the silver buttons and on/off button when phone is off)
Use SonyEricsson's update program.
IMHO it should update as the phone connects to usb with different mode than normally.
great, a few hours later and got it working.
I went into town and but a new cardreader. in the meantime my X1 woke up
and I could use the SE update installer.
So now I have got a newer WM6.1 (ROM 1.03.162.10, radio 1.10.25.18) running which is so much faster than my old system
now time to enjoy the sun....
Strange, almost the same thing happened to me on that very day... Phone stopped booting after the SE logo (Animation didn't show up). Had to Hardreset after several attempts to solve the problem...
Hi everyone!
My friend has got the HD Mini and put Android on it. After AD crashed some programs didn't work after restart and so he wanted to install a new ROM on it. Everything worked fine until the installion got 100% suddenly the screen got black and showed this message:
Software update failed.
Please try again.
He tried again but nothing worked. No reset, nothing....
Can anybody help ??
Try to put a original Rom, first take out the battery, put the battery again, tham old the volume down, push the power buton, the screen will be in three colors, connect the usb cable, and flash the original Rom.
You need to download the original Rom, from the Htc site, with the Hd Mini serial number.
malima17 said:
Try to put a original Rom, first take out the battery, put the battery again, tham old the volume down, push the power buton, the screen will be in three colors, connect the usb cable, and flash the original Rom.
You need to download the original Rom, from the Htc site, with the Hd Mini serial number.
Click to expand...
Click to collapse
Okay I did as you said, but we only got Error [276].....
And the tricolored screen doesn't look normal
but thx
it's the update error.just make a soft reset and launch the Ruu again.
ps:do you flash you device with the original rom?
Is very important you flash the original Rom, see in this post how to discovery the region of your Rom http://forum.xda-developers.com/showthread.php?t=799923&highlight=Malima17
We used the original ROM but always the software update error appeared.
My friend can be lucky that he's got guaranty so he sends it to htc...
But thanks!!!
look at my thread : http://forum.xda-developers.com/showthread.php?t=1041988 - with a (HD MINI) in your same situation I have repaired everything with my procedure. perfect. be quiet.
Procedure with the stock rom with activesync, having your screen, absolutely does not work, 'cause in your situation is corrupt to boot. With SDCARD method avoids the problem and create the boot from sdcard-