Related
Hi Guys,
I know this might sound crazy but I was wondering if anyone is having this little problem.
Whenever I hold the jam by where the "i-mate" logo is, i hear and feel a slight click, it's as if the jam's case is not sealed correctly. If you don't knwo what i mean, it's like when you put ur thumb on the iMate logo and your pointing finger on the back of the jam and then pinch, you can feel the jam make a very slight click. The other four corners of the jam is fine and tight, but the i-mate logo corner seems to be slightly clicking and not tight whenever u squeeze or pinch it.
IS THIS JUST ME ?????????? if it is i should probably return it for another! PLEASE LET ME KNOW GUYS HELP!!!!! THANKS!!
no i dont think so :wink:
if u meant the cover then i have a little bit of click at i-mate logo
NightmarE said:
no i dont think so :wink:
if u meant the cover then i have a little bit of click at i-mate logo
Click to expand...
Click to collapse
YEA !!!! THAT's EXACTLY what i mean!!! at the i-mate logo, you have a bit of a click too right??????????? SO THIS IS ON ALL JAMS???
i think all i-mate jam units have the same problem, plus i looked up into 10units and i found that every unit has a little scratch on the cover in diffrent place ....
i thin the first version has some problem. well, i think the second versin willl has a few problems....
that just totally sucks... I think i will just go and super-glue it tight so it wont click no more
:lol: i'll let you guys know what happens, hahah
no klik for me
hahah are you SURE????? you just messing with us right?
Click
Yep, mine does it too.
On mine, I can see that it is being caused by the fact the case is a little loose at the back (behind the iMate logo!)
P
Just got mine today from Modaco and I'm really chuffed with it. No clicks, No Scratches. Its perfect. Anybody want to be an XDA IIs
No click here
Located under the battery cover, some above the rubber battery lock, to the right of the battery itself.
Does anybody know the usage of it?
Have asked before about it and no answer.. not even from QTEK ..
Would realy like to know what it is ..
Carlis
Hi,
Push the button in.. and you will see that the Jam turns on.....
It it the cover open/close switch..
Cheers
So this means we can change the cover???
That would be great !
Since I have my S100 for 2 weeks and droped it :-(
it has a bump on its head now.
Happens everytime I buy something new, it needs to be damaged a bit, before I have luck with it :lol:
Thx.. for open my eyes.. I must say .. how the h*** could I miss that.. hehe... was so sure the springs on the sides was some shortcut thingie with the back cover so it felt it was on ..
Learning every day ..
Carlis
Hi,
The 2 metal spring are for the bluetooth antenna, because the GSM antenne is under the upper part of the device...
Cheers
any more detailed instructins of how to remove the front cover and the upper back cover ?
got a friend that does paintjobs, would be nice with a personalized Qtek S100 pics and more tips please !!
Hello Guys:
I don't Konw if anyome of you have the follow trouble:
When I put my xperia en the case some times I take it to answer a phone call and the screens apper in landscape mode ... I try to find out for severals weeks what was the problem until today that a friend told if is not a problem with the iman of the case ... Eureka ... that was the problem....
I really can understand why the phone has this problem .... and I would like to Know if someone heard about that and what's iot mean.
Thx a lot again.
BR
The Maxx
5$ that ur case has a magentic fastener
the landsacpe sensor is a magnetic switch. ur case probably hase a magnet too and so the x1 thinks u opened the keypad
yes, i have the same problem, now i dont use this case any more... i use it caseless ...
im having a problem with my htc gene (p3400) the touchscreen is not responsive but the keys are still working....... need help on what to do beside of getting this phone to a service center..... will appreciate if someone help....
DAMN! no one is replying to my post!
ok ok do anyone think i should change my LCD?? on my p3400?
hahaha once again a day have past and no one is replying.........
should i replace my p3400 lcd but the old lcd is stil functioning the thing is the touch doesn't work......... if anyone please...... i need your guidance! hahahaha
[email protected]#K it's almost 1 week damn! still no reply!
thinking of changing the lcd for a change hahaha [email protected]#K all those who view and doesn't even reply damn you all!
listen what happend to ur gene,so ur not able 2 interact thru LCD....?
yeah i cant interact with the LCD means i cant use the touchscreen features but i can read messages and receive calls....... the keypad and the LCD is still working but not the touchscreen....(atLAST! someone is willing to help....!)
did ur gene droped any where,or any incident with LCD....if so then plz let me know......coz there is a thin layer of plastic in between one liquid is there.....if this is damaged no 1 will help u & any circuitary damage also cause 2 failure of LCD screen......if ur gene is under warrenty plz change it for free.....
try to get to the settings and reset your device...
If it still doesn´t work... your touchscreen is broken and you will have to change it
I had same problem. For me there was a piece of dirt between the screen and the cover which was causing the screen to be pressed. I removed the cover and cleaned the dirt from around the frame and the screen is now working. Hope this helps
i didn't drop my gene......... and how could i clean the digitizer of it?
Hey guys , i need some help here..
I dropped my Jasjam in the water , and now i've got a lot of problems :
1 - My Keyboard backlight sensor ain't working anymore , the keyboard is lit all time , this is really annoying and eating my battery , a fix , software , anything ?
2 - The Keyboard keys r going crazy , ex. when i press v it writes dv , when i press e it writes eg , when i press "space" it writes "c " , this is very annoying too coz i can't use it to write and i hate touch writing.
Both r hardware probs , i know , but maybe there is a software fix or something for the first prob.
Is there a way around prob 2 without opening the phone coz i can't do that , is there a way i can dry the water beneath the keys or something
BTW : i've tried hardreset , different roms , keyboard layout , etc. nothing worked.
Help Plzzzzz
I hope, you took the battery out as soon as it was possible...
Take it out again, and let it dry for a couple of days. It's still wet inside.
You might also use a hairdryer, but carefully, don't fry it!
If this doesn't help, you'll have to go to a store equipped with an ultrasonic cleaner.
Sorry mate but you'll really want to open that phone, especially the plastic cover.
You just need to find a torx screw driver with sizes between 1-5 [I forgot the specific ones you'll need] and a tiny frearson screw driver [that the + shaped hole].
Considering the age of the TyTN, it's probably no longer under warranty anyway.
Air drying without opening it can take months, seriously
Thanks all ,
Sadly , i didn't remove the battery at all.
I don't know if it's still wet , i mean the phone is working fine just the keyboard light and crazy keys problem.
Sadly too , i can't seem to find this screwdriver here in Egypt
And yes of course , the warranty is no more.
I may try the hairdryer , hope it works...
BTW : what plastic cover do u mean ??
Again thnx 4 help guys ...
medo_punsher said:
Hey guys , i need some help here..
I dropped my Jasjam in the water , and now i've got a lot of problems :
1 - My Keyboard backlight sensor ain't working anymore , the keyboard is lit all time , this is really annoying and eating my battery , a fix , software , anything ?
2 - The Keyboard keys r going crazy , ex. when i press v it writes dv , when i press e it writes eg , when i press "space" it writes "c " , this is very annoying too coz i can't use it to write and i hate touch writing.
Both r hardware probs , i know , but maybe there is a software fix or something for the first prob.
Is there a way around prob 2 without opening the phone coz i can't do that , is there a way i can dry the water beneath the keys or something
BTW : i've tried hardreset , different roms , keyboard layout , etc. nothing worked.
Help Plzzzzz
Click to expand...
Click to collapse
Ive fixed a few "wet" phones (even my own old tytn 1 that fell into a river) by turning it of as soon as possible, take everything apart(stylus, battery,sd-card etc) shake as until all visible water is gone and put it all into a bowl of rice. that has fixed 2 phones, the other 4(inluding my tytn 1) i had to disassamble totally(unscrew,take apart housing,disconnecting flatcables and so on) and then put all parts into a kitchentowel and then onto a plate and into my kitchenown on about 60 degrees celsius for few hours - assemble and voila =) truth be told, it dosnt always work but i just might.
good luck
another way
remove your battery ASAP
Electric + water = corrosion
when this happened to me with mp3 player, I put it in the car for 3 days.
when parking in the outside, The car gets to 50-60 degree inside (Even more)
if your phone is in the car, it will dry, no damage will happen to it.