I have the T-Mobile MDA and am experiancing a lot of static when using any of my BT headsets (MotoH500, MotoH700, or JabraBT125). Just wondering if this is a common problem with the WIZA200. My wife's MotoSLVR works great with all of the headsets and is static free regardless of location... anyone know of any fixes?
Related
Hi all,
First post for me, but i've been hiding in the wings for ages.
Anyway, just for your info, the JABRA BT250 works perfectly (Headset profile).
Once bonded with the XDA2, it doesn't loose any connection, even after charging.
Once the XDA2 and BT250 are bonded nothing seems to stop them working together.
Roll on the Hands free profile tho...
Sno...
Hi,
I can confirm the above. I was really worried about trying to get a BT headset to work after reading about all the problems other users have had in the past.
I bought a Jabra BT250 for £79.99 from my local o2 shop in Bristol.
Works perfectly. Bonds with no problem. Has kept that bond even after soft reset on XDA and charging / turning off etc on the BT250.
Highly recommended. 8 hours talktime and 240 hours standby on one charge of the headset.
Steve
I'm using the BT250 also with no connection issue. However, I'm experiencing some slight static noise when the BT Headset first starts up. Are other people getting this issue as well?
gratefuled said:
I'm using the BT250 also with no connection issue. However, I'm experiencing some slight static noise when the BT Headset first starts up. Are other people getting this issue as well?
Click to expand...
Click to collapse
I only experience this (actually it's more a sort of distortion) when my battery is under 55%.
Further I can only second the opinions of the above posters: Using a BT 250 for a while now with my MDA II. Really recommended!
Does it work w/ Microsoft Voice Command???
No BT headset will work with Ms Voice Command at this time.
The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.
For future releases I plan the following improvements:
Support for Bluetooth headsets
Support for Bluetooth network access points
Send contacts and files through Bluetooth
http://www.angeltowns.com/town/bluetooth/
i am looking also for handsfree bluetooth support if any help on that
Yeah, headset works fine, it's the handsfree profile we need, that's the one adding enhanced features....
Do you know why some headsets work better than others? I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
gratefuled said:
Do you know why some headsets work better than others?
Click to expand...
Click to collapse
Maybe because of the headsets itself ? I bought a HBH-35 and can do [/quote]anything with it, walk out of range and back, turn it off and on, reset the MDA, chanrge the headset etc etc. without having to re-pair...
I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
Click to expand...
Click to collapse
What headset-functions do you mean ? Caller ID ? Voicedial etc. ?
That's not in the headsetprofile, that's in the handsfree profile. the headsets with enhanced functions use the handsfreeprofile also, nut just the headsetprofile...
downloaded and installed 1.0.1.2 fantastic my new bt gps works! However I can not use my gps and hbh-65 headset at the same time, any ideas please
Simply stated I was wondering if the new blutooth fix might help the Jabra BT250 work better. I know other headsets work without issue, but Jabra seems to have some problems, and I doubt that this is a Jabra problem, I believe it is a BT Device profile issue.
Can I have another link to the software cause the link is blocked from my ISP, or can any body upload it here or any other palce...
Best regards,,,
I have a new HBH-200, it works ok to answer a call but all the other features are not working, such as caller number etc.
Like i said; It's not i the headsetprofile. The headsetprofile doesn't do much except making a wireless headset possible. Answer, dosconnect and talk and listen, that's all...
Everyting else is in the handsfreeprofile (handsfree is used for advanced options for headsets and carkits)...
Link down????? :?:
not for me
Handfree Profile
I have 2 phones, XDA II and a Nokia 8910i.
My bluetooth Headset is the Ericsson HBH65.
To my surprise, I have paired the HBH65 with both phones and I am able to receive calls from both phones (not at the same time of course) without any problems. Whichever phone rings first get the use of the HBH65. In conflicts however, the Nokia seems to have priority over the XDAII, which is fine with me, but I am so happy that it actually works.
As others are mentioning, I am really missing the enhanced functions of the Handsfree Profile. Can anyone suggest any solution or perhaps work on resolving this issue as a lot of people are waiting for this. I was aware that Towas was planning to release a new version to his BT Stack Fix, has he got anywhere with that by any chance? or anyone else?
Hi all,
I have an MDA II and a Plantronics M2500 BT headset. So far so good....
I managed to connect them together, and after some work (bonding, etc.), I was able to phone using my headset.
However, I have the following problem:
If I switch on my BT headset and enable BT on MDA II (so BT 'on', BT headset mode 'enabled'), the 2 devices do not automatically connect.
I have to 'play around' a bit, e.g. by disabling/enabling BT headset mode, turning BT settings on/off/discoverable, turning on/off the BT headset, and try calling some numbers for testing before it works.
After a short while (and if I'm lucky , I can call and receive calls using my headset.
This is of course not the ideal situation. I'd like to have the devices work automatically as soon as I turn them on.
I have the suspicion that this is a bug.... Did anybody else have similar problems and does anyone have an idea how to get this fixed?
Oh yeah: I am using a BT GPS mouse as well for TomTom 5 and this device is also bounded to the MDA II.
Thank you very much in advance!
BTW: the quality of the BT headset (once I get it working) is pretty good, so no problems there...
Yep, one of the problems with (some) BT sets...
Didn't have is with a Sony Errocson HBHxxx, did with a Jabra, didn't with a Supertooth2 etc....
Try the famous BTtools, it often helps...
Or get another headset
Does anyone else find the Bluetooth signal quality to a Bluetooth Headset to be absoultely awful? Since switching to the Xda Mini S, my previously trusty Jabra BT250 now gives broken conversations, glitches, etc. causing me to have to repeat myself half the time :x
Any ideas?
Yep.. Same problem here using a Jabra JX10 Headset.
Qtek 1.6.7.1 WWE
Anyone else experiencing this as well as us, and any word from O2 on when it might be fixed and an update released?
It has rendered my Jabra headset not worth using
I'm running the Universal with the original O2/KDS/Indra V6 and everytime I try to use my Jabra BT250V or in-car hands-free I can't hear anything of teh remote coversation and anything I say is 'echoed' into the headset/hand-free.
Something is obviously wrong which is surviving firmware flashing - I'm suspecting a dry-joint or other hardware issue but if anyone else has encountered and resolved this, the answer will be appreciated!
BT works fine with external GPS and TomTom and BT PAN to Lapdog, so BT does actually work, just an issue with mic/speaker!
MTIA
Aaron
Jabra Bluetooth BT135
vfrvulcan said:
I'm running the Universal with the original O2/KDS/Indra V6 and everytime I try to use my Jabra BT250V or in-car hands-free I can't hear anything of teh remote coversation and anything I say is 'echoed' into the headset/hand-free.
Something is obviously wrong which is surviving firmware flashing - I'm suspecting a dry-joint or other hardware issue but if anyone else has encountered and resolved this, the answer will be appreciated!
BT works fine with external GPS and TomTom and BT PAN to Lapdog, so BT does actually work, just an issue with mic/speaker!
MTIA
Aaron
Click to expand...
Click to collapse
Cool dude,
I had also faced the same problem, but from couple of month I am very much satisfied with my Jabra Bluetooth BT135 which is totally good in all ways and it works on a large range compare to other head-free. I had also used different models of jabra and I am happy with there result. By using this you will not get the echo problem. First of all I was confused when I was going to purchase the Bluetooth headset in the shop because there are too many head-free are available in the market with a different range. Be sure at that time.
Good luck Enjoy your day.