hi everyone,
i've just bought a m3100 and wanted to by an mini SD card for it. just needed some advice. will a 4gb mini sd card work? can i use a micro sd card?
thanks
uklarka said:
hi everyone,
i've just bought a m3100 and wanted to by an mini SD card for it. just needed some advice. will a 4gb mini sd card work? can i use a micro sd card?
thanks
Click to expand...
Click to collapse
Hermes devices only use micro sd cards
Mike
Thanks for that Mike. Can you just clear one more thing for me please. I can only use a 2gb micro sd card with the M3100 or will these new 4gb micro sd HC cards work?
uklarka said:
Thanks for that Mike. Can you just clear one more thing for me please. I can only use a 2gb micro sd card with the M3100 or will these new 4gb micro sd HC cards work?
Click to expand...
Click to collapse
They are not long out and I have not heard any feedback yet. You could have a look around in the Hermes Accessories board it was being discussed there.
Mike
Thanks for that mike
4GB Micro !!
I just tried one in my Cingular 8525. The device reads 1 GB only. I thought I had a defective card, so I replaced it with another but still it read 1GB. Then I placed a 2GB. It read it as 2 GB. ( 1.93 GB ). Not sure why it couldn't read the 4 though.
asfoor said:
I just tried one in my Cingular 8525. The device reads 1 GB only. I thought I had a defective card, so I replaced it with another but still it read 1GB. Then I placed a 2GB. It read it as 2 GB. ( 1.93 GB ). Not sure why it couldn't read the 4 though.
Click to expand...
Click to collapse
This could be because of the way the card is formatted.
I would format using a card reader in a PC to:
FAT32 using 512k sectors size.
if problems remain I have seen a suggestion that you could partition the disk to have 2 X 2Gb partitions.
Mike
Hi all,
I have a problem with my Prophet, cannot read any SD card.
If I go to Settings-->Memory in the Storage Card Tab says, Total storage card memory: Not Installed. I tried at least 3 different cards, from diferent vendor.
Could you help me.
Regards,
Paulo
hi
i just bought a new 2GB Transcend MicroSD Card
with mini sd adapter.
but the wizard doesnt read the card
(fat32 formated)
if i try the card in a cardreader its working ,
my old 512mb mini sd card working is working in my wizard..
any solution?
XTRANGE...
Try to use a ROM that contains the app format storage and try to formatt... but i think it may recognize it first... nothing to lose if try... or reformatt it on a XP built in with card reader.
Panasonic makes a free sd formatting software that it claims to strictly adhere to the sd standard:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
You could give it a shot, don't see how it could hurt
Hello. I have a problem regarding my vizibility of the sd card on the device. I used to manage it on HTC touch HD, and now, I want to use it on Diamond 2. But it is not recognized by Diamond 2. I've format it quick, low (longer), fat, fat32, ntfs, but without succes. I've installed 3 different ROM's, but still nothing. On the PC is working without any problems. It is an 4GB microSD HC card
you mean your TD2 can't even detect the microSD when you go to File Explorer?
yes. i cannot see at all the microsd on my device. only on the PC.
and i've tried also 2 different microSD cards: 1gb, and 2gb (Nokia this one) and is working with those one. I've tried my microSD card on a Nokia and htc p3300 and is working.
ady_uaic said:
Hello. I have a problem regarding my vizibility of the sd card on the device. I used to manage it on HTC touch HD, and now, I want to use it on Diamond 2. But it is not recognized by Diamond 2. I've format it quick, low (longer), fat, fat32, ntfs, but without succes. I've installed 3 different ROM's, but still nothing. On the PC is working without any problems. It is an 4GB microSD HC card
Click to expand...
Click to collapse
I presume the roms were not loaded via the microSD, then? Do you see the microSD cards via ActiveSync?
nop, not at all. I cannot see the microSD in any other way (not even microsoft active center - Windows 7). But, those 2 microSD (1, 2gb) i can see. And yes, i didn't install the ROM from the microSD.
solve it by replacing it with a 2gb sd card.
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card??
ah no problem of card because started the card with the adapter to the PC and read it perfectly.
I have D2 and the card is the Kingston with 4Gb....
I can help my problem??
Hello,
My problem is solve, I changed the card....
At last I found people with the same BIG problem of mine!!! I NEVER succeded in using ANY (nor cooked nor official) WM6.5 version and I am getting quite desperate So, it appears that 4GB Kingston SD is not "WM6.5 compatible"..I tried also Sandisk 2GB SD with the same miserable result...Lucky me!!
If it solves the issue, I am prone to buy a new SD card, but how does it have to be to work correctly?? what specs,what size is supported, is there a recommended brand?
My forum search led me to a closed thread and here, is this the only "SD and WM6.5 problem" related thread?
P L E A S E H E L P
sualc said:
At last I found people with the same BIG problem of mine!!! I NEVER succeded in using ANY (nor cooked nor official) WM6.5 version and I am getting quite desperate So, it appears that 4GB Kingston SD is not "WM6.5 compatible"..I tried also Sandisk 2GB SD with the same miserable result...Lucky me!!
If it solves the issue, I am prone to buy a new SD card, but how does it have to be to work correctly?? what specs,what size is supported, is there a recommended brand?
My forum search led me to a closed thread and here, is this the only "SD and WM6.5 problem" related thread?
P L E A S E H E L P
Click to expand...
Click to collapse
Strange, because I have the same memory cards, Kingston 4 GB, and I never had any problems. Currently I have WM6.5 official and works well.
You tried to format it?
rspillo said:
Strange, because I have the same memory cards, Kingston 4 GB, and I never had any problems. Currently I have WM6.5 official and works well.
You tried to format it?
Click to expand...
Click to collapse
Thanks for feedback!! Yes I formatted it in all possible ways, with PC adapter and within the device . As I feared, there is not a general rule to determine wether a SD card will work with WM6.5 or not and I am not rich enough to buy SD cards until one woks
I've heard it has something to do with the country in which the card was made. China was OK and Korea wasn't, or somthing like that. Don't really know whether that's correct though.
thanks, going to check that, ANY SUGGESTION IS WELCOME !!
What is the class of your memory card? Mine is class 4
I think it's a class 4, but if you tell me how to be sure I'll check better. Maybe using a diagnostics software?
EDIT:I just took the SD card out, I can read "SDC4/4GB"...maybe C4 stands for category 4..Again, help much appreciated!
From Topaz I don't know if you can see the class. It is in the packaging.
what's your actual ROM?
ITA WM 6.5 Original
ah ok, already tried that without success..and that was when I got disppointed the most