I want to run my own wifi driver instead of the default one that comes in ROM.
The existing driver is TNETW1251.dll.
I have a new driver named TNETWtest.dll.
I've changed the following reg values:
[HKLM\Comm\TNET1251] "ImagePath" = "TNETWtest.dll"
[HKLM\Comm\TNET12511] "ImagePath" = "TNETWtest.dll"
Technically, this should have loaded my driver, but it doesn't.
Just in case security is an issue, I also signed my driver with the SDK Priviledged certificate and I also installed the SDK certificates on the Trinity device.
However, when I try to load the driver via CommManager, Windows CE refuses to load the driver with no indication of what is wrong.
Anybody have an idea why?
Thanks,
((&->
WM kernel logs certain events, including driver load failures, to a region in flash.
Dump that region (with itstools or haRet) and check for the errors related to your driver dll.
I examined the itsutils and did not see anything about event logs.
What region in the flash am I to look at?
thx,
((&->
Hi,
Have anyone tried installing drivers for USB devices on O2 flame, like USB to serial converter etc. I was trying to do this and it fails. I want to use my USB to serial converter to connect to the Flame's OTG port. I tried to install the FTDI driver according to the procedure given. but O2 flame does'nt allow to install any driver. I am really . Trying this for quite a long time.
Anyone had a success in doing this, will appreciate your help.
Best regards,
Manas.
Can you give us a link to your drivers. Without that we will not be able to help you.
thierryb said:
Can you give us a link to your drivers. Without that we will not be able to help you.
Click to expand...
Click to collapse
I downloaded the driver from this link http://www.ftdichip.com/Drivers/VCP.htm
Its not only this driver. In the process to evaluate if the Flame supports installation of new USB driver. I found that it is not allowing. Not even the DLLMain is called.
Done. This is not that easy to though.
how? really intrested... trying to install on toshiba g900
Install a USB driver on Flame
Sorry I was not in touch with this forum for a long time.
For this the first step is to do the registry setting correctly:
HKLM/DRIVERS/USB/LOADCLIENTS
HKLM/DRIVERS/USB/...
Dont forget to mention the index and the prefix values.
the dll must be placed in the /windows folder
Important: Build the driver project with the windows ce version 4.2.
Hi there,
I'm trying to get linux working with XDA2...
At the moment, I use HARET to boot the kernel, but I encounter some problems.
1. USB Serial Connection is breaking when booting the new kernel. I wouldn't have assumed anything different. But the Xda-Developers tutiorials shows how to connect via that virtual port.
2. I can use the real serial port to redirect Kernel Output until it says: "Login:"
I'm using minicom to get the output. But I can't enter the username. I'm sure that I use correct port settings, is there anything special with the connection to the XDA2? Should I use another Application to login? What's wrong with my serial input line?
Can somebody tell me how to use the Serial port via other Terminals? (Linux shell commands are highly appreciated.)
Thanks in advance for some hints!
Edit:
I also tried to compile custom kernel, but after haret switches to the dark screen (after showing the linux logo with splashed eyes ), it isn't redirecting any output to PC.
hi. you should first tell which software versions you are using.
Himalaya kernel is not maintained for a long time, but it's
not very difficult to update it.
Versions I use:
HaRET-0.3.6.exe (http://anymore.nl/ipaq/haret-0.3.6.exe)
zImage-2.6.12 (http://himalaya.lange.nom.fr/zImage-2.6.12)
initrd-2.6.12.gz (initrd-2.6.12.gz)
Hardware:
Processor: Intel PXA263
Model Nr. PH10A
Flash Chip type: 28F128k3
Hi there,
I'm looking for some information about what i would need to do to get a USB device recognised on my x7501. I'm looking to connect a USB-to-UART bridge chip (FT232RL or something) to the device so I can essentially have a serial/COM port on my phone, which i can use for data logging.
I was wondering if anyone's had experience with anything like this so i could find out:
A) what devices are already supported in WM6, as the bridge chips can mimic a virtual com port via built in windows drivers but im not sure if this driver is in windows mobile
B) what i would need to do to setup for dev for writing WM software and the driver if necessary (i have visual studio, i think there is a WM emulator but im not sure totally?)
C) any other questions you think are relevant to my goal
thanks in advance,
sebastian
2/18 Update:
USB charging and controller works, audio probably works. Here's some update on this project:
Battery
Put C:\DPP and C:\EFIESP back. Nokia's driver reads C:\EFIESP\Battery.json in kernel mode (WTF). If you have NokiaEnergyDriver.sys and other PMIC/PEP/MIPI BIF (on some models) drivers installed, you should get battery show up.
Sign drivers?
Yes. Sign everything to prevent bad things from happening. I used a commercial certificate for conveience , but you don't have to do that. Here's a handy script that generates a self-signed certificate and installs it on your phone: https://gist.github.com/imbushuo/4de89ad18a0f538d8ebd18bf6daca56a
Download it, run it as administrator and specify ImageDir to your phone's partition (in mass storage mode). Then sign all your drivers binaries (and catalogs as well) with the fingerprint provided.
When signing your drivers, remember timpstamp all drivers. DigiCert's help documentation is useful for signing binaries.
Turn off UMCI
See https://forum.xda-developers.com/showpost.php?p=36394268&postcount=222. Set UMCIAuditMode key to allow all desktop applications and UMDF drivers load.
Make USB work
You will need several supplemental drivers from Windows Phone: BattFltr.sys, CAD.sys, ufx01000.sys, ufxsynposys.sys (or ufxchipidea.sys, depends on your chipset). Copy registry keys (HKLM\ControlSet001\Services and HKLM\ControlSet001\Enum\ROOT\CAD / HKLM\ControlSet001\Enum\ROOT\BattFltr) add supplemental WDF registry keys. Some files are attached as attachments, so you can take a look to get some idea about that.
Make Windows Store Apps work on unsupported resolution
See my blog post.
---------
While this project is not totally finished (e.g. No Battery status/charging unknown, no cellular, no audio), I decided to post this thread as many people asked me about the tutorial. This is just a brief tutorial, you need to have plenty of time on this to make this happen. Be careful as some steps are very dangerous.
This tutorial is provided AS-IS, without any implicit or expressed warranties. By reading this brief tutorial, you are agreed that you are taking your own risk trying this. I am not responsible for any possible consequences of installing Windows RT or other non-Windows Phone OS on Lumia phones. If your phone ships with Windows 10 Mobile, then this tutorial might not fit you. You can try drivers from other models, but I have no guarantee on this.
General workflow
- Unlock your phone with WPInternals 2.4
- Enter mass storage mode, copy registry files from MainOS partition
- Copy files from DPP partition
- Download Windows RT 8.1 ISO (publicly available on Internet, Google it)
- Download a Lumia 2520 recovery image for some files (I will post these files later)
- Download a Windows Phone 8.1 firmware for your phone
- Extract drivers, re-assembly INF files
- Patch some drivers (see my note)
- Self-sign some drivers (see my note)
- Make sure you know what you are doing: Delete MainOS and Data partition, create new NTFS partition for Windows RT. Do not touch other partitions.
- Apply system image (dism works fine)
- Copy DPP files back (C:\DPP)
- Modify sysprep tasks (see my note)
- Apply BCD configuration
- Boot
- Let OOBE fail once
- Go to mass storage mode again, mount registry and force OOBE run again
- Have fun
Notes on this project
ACPI
Reading ACPI DSDT table will help you understand your phone architecture. ACPI tables are located in PLAT partition. It is easy to extract them with 7-zip (after converting FFU to VHD). To decompile dsdt.aml, you need to download iASL tool, which is available on Internet.
Certain devices, like touch screen or panel, require other devices have driver loaded and enabled. This is not shown in Qualcomm's ACPI implementation. In my case, I need PEP, PEP 3rd, GPIO, BAM, I2C Device, QMUX, Shared Memory drivers loaded to make touchscreen work. It varies by model.
Re-assembly INF files
Mount SYSTEM registry from your phone or FFU, go to DriverDatabase\DriverPackages\<Some Driver Package>, each key in driver package key matches INF sections respectively. See some driver INF files to get some idea.
Remember to check ControlSet001\Service for additional information if necessary. If you are working on Windows Phone 8.1 firmware, check \Windows\System32\Packages to make sure you've got correct files and registry configs. These files are gzipped.
Patch drivers
Certain drivers read DPP partition for device-specific calibration information. While Qualcomm shares the codebase between Windows RT and Windows Phone, DPP partition is handled differently between platforms. You can search Unicode string "PhoneNT" to determine whether drivers read DPP or not.
To fool drivers think they are living in Windows Phone, you can create another multi-string value in the ProductOptions key. I created a value called "AnotherSuite" and filled "PhoneNT" in. Then I modified all "ProductSuite" Unicode strings in drivers to "AnotherSuite". Remember to re-calculate linker checksum (dependencies) and PE checksum.
This is critical to make wireless (Wi-Fi and Bluetooth) subsystem work.
Graphics
DO NOT use user-mode driver module from WP on Windows RT. The Windows Phone Qualcomm GPU driver does not implement DirectX 9, which is required by Windows desktop. Using WP UM driver will crash DWM.
To correctly enable GPU acceleration, use kernel driver and decoder module from your firmware, and user mode driver from Lumia 2520's recovery image. At least this works on Lumia 640 XL.
Touchscreen
Touchscreen works, however, WP driver reports wrong metric system to Windows RT. To workaround this, modify SYSTEM\TOUCH key, make some value larger than expected. See my value for 640XL in attachment.
Remove some sysprep tasks
Remove BCD and WinRE specialization and generalization tasks from sysprep task definition. OOBE will fail still. Boot to mass storage mode, mount SYSTEM registry, change setup type to 1 (see your current OS for ideas about other values), change program path to oobe\msoobe.exe. You should be able to see normal OOBE then.
BCD and Driver Signing
Test signing should be on. Disabling integrity check is recommended (though documentation says this key is ignored prior to Windows 10). Copy catalogs to the new OS, and self-sign drivers you patched.
Kernel Debugger
To enable WinDbg KD, modify your phone BCD:
Code:
bcdedit /store <Path> /dbgsettings usb TARGETNAME:WOATARGET
bcdedit /store <Path> /set {Your OS GUID} Debug On
Connect your phone to PC, start WinDbg, USB kernel debugging, target name "WOATARGET".
Have fun with Windows RT on Lumia, I am going to continue working on audio and battery
Follow
Ty Imbushuo , GREAT WORK
didnt you forgot to make efiesp guid to a efi partition else bcd cant be updated
Is there a way to patch the kernel or a bypass to avoid SECURITY_SYSTEM BSOD on MSM8960 devices?
Thanks for your work. I hope to get a newer Windows Phone soon and try Win10PE, I'm working on a custom shell that hopefully grants it a good experience on handheld devices since we lack ARMv7 ShellExperiences
J0SH1X said:
didnt you forgot to make efiesp guid to a efi partition else bcd cant be updated
Click to expand...
Click to collapse
Qualcomm's firmware is weird, so I didn't do that. (They hard-coded something) Maybe I will try it later with a dev board and see what will happen.
Fantastic job :good:
Is it possible to enable a second external monitor via Miracast ?
What about bluetooth keyboard and mouse ?
Lumia 950/XL should also support 2x monitors ( DisplayPort/HDMI via USB-C ).
It also has more RAM and might run apps better than L640.
imbushuo said:
Qualcomm's firmware is weird, so I didn't do that. (They hard-coded something) Maybe I will try it later with a dev board and see what will happen.
Click to expand...
Click to collapse
thats weired on my 930 this is NEEDED to get rt to boot but weired enough my 640 lte doesnt boot it at alll but sadly i dont get how to reassamble the inf files (im litterally just comparing my compiled touch driver inf with the registry of my 930)
I can not find the windows rt on the Internet. Can I send the file link download?
imbushuo said:
While this project is not totally finished (e.g. No Battery status/charging unknown, no cellular, no r FFU, go to DriverDatabase\DriverPackages\<Some Driver Package>, each key in driver package key matches INF sections res
Click to expand...
Click to collapse
I use google translate so it's hard to follow, it's great when you have a video tutorial, everything is more intuitive and easy.
INF files Qualcomm ARM-based View attachment Inf.zip
prokakavip said:
I use google translate so it's hard to follow, it's great when you have a video tutorial, everything is more intuitive and easy.
Click to expand...
Click to collapse
If you are an end user I would recommend waiting for WPInternals partition dumps for your device
I knew this solution... so they cant make general Qualcomm drivers never. Device specification is nightmare. Better get a hammer and deepmagic
Thank you for all the effort of going through this and providing the information.
Can somebody whoever upload fixed registry files and drivers? i was able to follow all steps successfully (except these parts) but on first boot i just get a blue screen with a sad smiley.
Also, i assumed you meant applying the install.wim image via DISM from the Windows RT 8.1 ISO.
(For those who need more help with this, Google: "Append, apply, and export volume images with a Windows Image (.wim) file",
i'm not allowed to post links due to post count).
Die Anleitung ist jetzt auch in deutsch verfügbar und hier zu finden:
Windows RT 8.1 auf ein Lumia installieren
WPVision.de said:
Die Anleitung ist jetzt auch in deutsch verfügbar und hier zu finden:
Click to expand...
Click to collapse
I registered and it still said i'm not allowed to visit the forum because i dont have permission.
D-V-D-K said:
I registered and it still said i'm not allowed to visit the forum because i dont have permission.
Click to expand...
Click to collapse
That's correct, because you did not follow the guidelines.
The activation for this area is done manually by your first post.
Samuelgames said:
If you are an end user I would recommend waiting for WPInternals partition dumps for your device
Click to expand...
Click to collapse
Can you upload your partition dumps for 640xl?
Removed. Sorry I was being rash.
spavlin said:
INF files Qualcomm ARM-based View attachment 4410518
Click to expand...
Click to collapse
but theese inffiles arent redone from registry
for example touch driver is missing
imbushuo said:
- Download a Lumia 2520 recovery image for some files (I will post these files later)
Click to expand...
Click to collapse
Use at your own risk!
Some Lumia 2520 Firmware And Driver Update 10. 6. 2014:
Code:
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/03/20623735_d3143757b17f94d00f53dc6f3f4dbdf48c36430e.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/03/20624060_4b5dec4829bf5e013bf5e6c045a4ed9367afe88d.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/03/20624064_70ea6951b8f7c7d72963c38e302356f46642ec85.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/03/20624552_3c10b74a53f010a90539ea1e606f562d65a03082.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/03/20626644_7f0f6945d5e0e19e78b3794490990145b98e2c0c.cab
http://au.ds.download.windowsupdate.com/d/msdownload/update/driver/drvs/2014/04/20639225_555ea122b93d34720513db1b344254a0a69a158c.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/04/20639552_08956ac77c46334650fc675794d58325f279ddbb.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/04/20640693_4d4f789e1349e350324fb7e31b60514ae191cb46.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/04/20642401_1278d3d9f4ae8d1903ec0c6f0861ec9912139b96.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/04/20643591_beca8afddf93a8679f6e875f5abfc44f9395975a.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/04/20643598_4a154479fe2ad83eef04c99e96e44b0e88efce8e.cab
http://au.ds.download.windowsupdate.com/c/msdownload/update/driver/drvs/2014/04/20643814_2d9a86009238af018f92aa76a9be453ef9231424.cab