Ok i did compare the aRTM and FARIA WM6 roms and notice something interresting. One is using the DLL directly and the other one is using the DLL as a module. So question is simple : what is the best choice ? Does it impact performance ? Does it offer some more functionnalities ? Any clue ??
Related
Hi out there,
after I tried to install a WM6 Rom on a G500+ and looked into several Eten DUMPS I wondered how to change the identification of that device, because it says something like "wrong hardware version" or so if I try to install that X500 ROM on it (what propably should be normal to be said) but is there any file or so which needs a change and then recompile the ROM to make it work?
Or can someone please help me step by step to brew a WM6 ROM for the G500+ and perhaps the G500? I think WM6 should work on the G500+ because of the hardware and processor speed.
So what points are exisiting to be taken care of?
Strauch said:
Hi out there,
after I tried to install a WM6 Rom on a G500+ and looked into several Eten DUMPS I wondered how to change the identification of that device, because it says something like "wrong hardware version" or so if I try to install that X500 ROM on it (what propably should be normal to be said) but is there any file or so which needs a change and then recompile the ROM to make it work?
Or can someone please help me step by step to brew a WM6 ROM for the G500+ and perhaps the G500? I think WM6 should work on the G500+ because of the hardware and processor speed.
So what points are exisiting to be taken care of?
Click to expand...
Click to collapse
Hi Strauch,
This site is actually for HTC based devices. There may be someone that might know how to help with your particular device, but don't count on it. Good luck though.
i need wm6 for my eten m600
Does anyone know a good tutorial (thread) for XIP porting
Thnx in advanced
Looking for the same. Anyone please? I'm sure I'll serve the community with new ROMs if I learn..
Regards,
Carty..
If you want there is one in italian:
http://www.a1kstyle.com/ptopic17150.html&highlight=xipport
That's the same incomplete version which is similar to Garmin' English version at Atom' Section. Looking for a more detailed one. Found something in Polish at http://mobione.pl/index.php?page=porting_ROM but seems there is no online translators for polish
Anyway, as far as Ive struggled, I understood that you strip coredll from one xip, use mreloc to change v and d base, paste coredll to the xip of other device and build it. Is that it required for building a new OS? I mean, does the new OS build solely depend on coredll? Then what kind of improvements will it have?
Thanks for helping.
Regards,
Carty..
Afther patch coredll.dll yopu have to change all the SYS folder (obtained with package tool) with the newest one.
I rip a ROM and get lot of folders such as the extra packages the previous cook added. I presume those files aren't needed but the rest of the common folders such as phone,os,baseapps and so on? What about the .ROM and .VM folder? Should they also be replaced?
What do they(.ROM and .VM) folder exactly do? They just seem to have some address information inside.
Regards,
Carty..
http://forum.xda-developers.com/showthread.php?t=331094
Isn't it preferrable to move over all of msxipkernel?
Yes I looked at the G'Loc thing before but no instructions on how to use it
Regards,
Carty..
Hi guys.
I have just upgraded my diamond with the last SFR rom. I need to change the CommManager elements : i need the 3G/GSM tab instead of the DirectPush one.
I have tried many tweak softs : advanced configuration doesn't work on this new rom (perhaps 1.93), diamond tweak doesnot offer the tab choice possibility.
And i don't find the answer on xda.
Could you help me ?
Thank you so much for everything. All your progs are really good ones !
Please guys ... That's a really big problem to me.
Tx
milillicuti said:
I have just upgraded my diamond with the last SFR rom. I need to change the CommManager elements : i need the 3G/GSM tab instead of the DirectPush one.
Could you help me ?
Click to expand...
Click to collapse
Perhaps this CAB file works? Download it and install it. I've used it earlier and it worked out well for me
http://forum.xda-developers.com/showthread.php?t=402012&highlight=manager
sibbor said:
Perhaps this CAB file works? Download it and install it. I've used it earlier and it worked out well for me
http://forum.xda-developers.com/showthread.php?t=402012&highlight=manager
Click to expand...
Click to collapse
Tx Sibbor.
That works. But i can't choose the tabs i need as i could do with advanced config.
I have the 3G i need, but some other disappeared !
Does someone have another solution .
Tx
milillicuti said:
Hi guys.
I have just upgraded my diamond with the last SFR rom. I need to change the CommManager elements : i need the 3G/GSM tab instead of the DirectPush one.
I have tried many tweak softs : advanced configuration doesn't work on this new rom (perhaps 1.93), diamond tweak doesnot offer the tab choice possibility.
And i don't find the answer on xda.
Could you help me ?
Thank you so much for everything. All your progs are really good ones !
Click to expand...
Click to collapse
That ROM probably has .netCF 2.0 instead of 3.5 which is the one needed for Advanced Config to work.
You can get it here.
FInixNOver, that's exactly what i did before i read your answer. That was the problem. Now it works fine.
Tx
Hello!I`m a user of HTC S740 (ROSE) and i want to coock a new ROM for this device but need some help because I`m new in such stuff.So far I managed to extract the XIP and SYS from emulator image for WM6.5 provided by Microsoft,what I need now it`s to disassemble the ROM image of Excalibur ROM coocked by ookba and extract the additional tweaks and software that he used in his ROM but the problem is that I do know how..
After this I want to coock a new ROM using the SDK of the WM6.5.3 and add the extracted tweaks and software to the image but another problem is that ROSE uses bought portrait and landscape and the image is only portrait?How to add also the landscape to the image?So if its somewhere there that knows and could help me do this..I would quite appreciate this
Probably not the right place for this.
I have searched and cannot find how to fix this (small) annoying issue....
I have created a hybrid ROM and have the huashan 3G phone canvas (5_0_61220163232_0). There is one annoying aesthetic issue I can't seem to iron out:
There are two images (Dialer_Contact_up.png & Dialer_Contact_down.png) that are used and I have tried using different ones I found in other phone canvas packages but always have the same 'overlap' issue.
How can I fix this?
OK - After a bit more searching with more specific keywords (dialpad....) I have found that this requires two files to be patched - phcanhtc.dll & phcanrc.dll. I think these need to be specific to the dialer (phonecanvas). I have the huashan 0.90 dialer (Phone_Canvas_Enhancement_2G_5_0_61220163232_0 huashan 0.90) so does anyone know where I can get the replacement files/modules or how to edit them to fix this annoying issue?
Thanks, Andy
i am also interested in such fix, or better how to fix the two dll files u mentioned.
In the attachment (just delete .pdf) r the fixed dll files, may be u can compare them with the original ones and fine out what should be changed.
WBR
Siemens Lover
SiemensLover said:
i am also interested in such fix, or better how to fix the two dll files u mentioned.
In the attachment (just delete .pdf) r the fixed dll files, may be u can compare them with the original ones and fine out what should be changed.
WBR
Siemens Lover
Click to expand...
Click to collapse
Thanks for the files. Unfortunately these are from a different phonecanvas and although they correct the visual issue of the overlap they don't support video dialing - i.e. the lower left button to select a video call gets changed. I need the original .dlls from the huashan package I am using modifying or access to ones that are already modified - anyone have them?
Andy
I provided u with the fixed files to compare them with the original ones (from the same Version) to find out what to be fixed or edited then u can apply it to any version!
WBR
Siemens Lover
SiemensLover said:
I provided u with the fixed files to compare them with the original ones (from the same Version) to find out what to be fixed or edited then u can apply it to any version!
WBR
Siemens Lover
Click to expand...
Click to collapse
OK - still struggling though
I think its a bit beyond my abilities
Andy