Hi!
Im willing to flash my rom using a dumped OSRom.nb with pdocwrite util. The thing is that I read all the warnings about locked CID in the aWizard thread http://forum.xda-developers.com/showthread.php?t=252957&highlight=awizard
And it turned out that aWizard uses the same pdocread and pdocwrite as I do. So naturally I want to CID un-lock my hw6915.
But theres the thing I cant!
Bootscreen shows only 2 numbers
1.00.00
1.50
No SPL or IPL. I guessed that my hw6915 is G3 because of the 2 repeating zeros, but who knows. So I wanted to get into the boot loader command promt but nothing worked
action button + power + reset (all at the same time for a few seconds) is Useless.
So can someone please tell me how to determine the IPL/SPL or get into the boot loader mode or how to get my whatever G CID un-locked. The lokiwiz errors from aWizard are as follows:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHON
E REBOOTS!
[ 5:50:22.76] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ERROR: ITReadDisk: outbuf==NULL
reading lock_backup.bin:
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: Unable to open host/destination file - The system cannot find the file sp
ecified.
result=80072746
[ 5:50:29.06] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
* Press [Enter] to continue
rx-8 You read for what device Lokiwiz03 ??????
Where is written that this works at 6915?
Read description of the program and do not try to use on your device!
No readme file
Well actually the zip file with Lokiwiz does not contain a readme file, but I suspect that it originally was meant for Wizard but other user with different phones have reported that it had worked on their phones. So after a week of reading the forums I came up only with this cid unlocker. I guess desperation took over me... Anyways can you suggest other utility?
How to see which CID verrsion is my BlackStone ?
same questions here lol
Start your HD in bootloader mode (tri-color), connect with mtty and issue getdevinfo command to check the CID.
Thanks mate
Could you elaborate a bit more? I cant seem to get the phone to connect properly to mtty. I don't get a prompt but a "notepad like" editor that cant execute anything, you just type in it.
Thanks.
There's no dedicated wiki article for mtty. Check out:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
Just don't use Hermes commands
Hi all!
I have 2 question:
i install the Artemis Touch 4.02 Full with 4 sided cube 4mb pagepool rom, with uspl cid unlocking works good, but i want to know my pda have cid lock or not, i put it in to bootloader and try mtty to find out the answer. it says:
Cmd>info
Invalid command : info
For a help screen, use command ? or h
Cmd>info2
Invalid command : info2
For a help screen, use command ? or h
what is wrong?
The second question is wm6 have a Extended rom? when i have wm5 the RescoExplor seen it (i copy it...)
i do the registry modification to unhide it from a toturial but nothing....
ps.: sorry for my BAD English.
Thanks Geripgeri.
I've had a search around but can't find any answer to this relating to an Artemis / Orbit.
I have just got hold of a second hand Orbit and when trying to check the CID lock via WST it comes up saying the CID is corrupt. Is there any way to fix this? I understand I should be able to write a new CID block? But I'm not sure whether these blocks are interchangable between devices (e.g can I use a key 82 block from a Wizard to write to an Artemis?)
Secondly - if I use USPL to bypass the CID - can I upgrade the ROM to 6.5 or will it through up an error because the CID is corrupt?
Cheers in advance and sorry if I'm being stupid :S
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Try This!!!
schnieder said:
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Click to expand...
Click to collapse
try this,
here's an experimental program I made to make the process more automatic so users can fix their own wifi without our help.
this is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
thank you for the answer
I tried with mtty and mac1.zip
here are the step
Cmd> task32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
I do not have the mac address of my wifi on the label of my pda so I put j 11 11 11 11 11 11 is what it must have the real mac address
I do not know what to do
It's been 4 months I'm looking for a solution for my pda
help me please