Hi all,
I currently have MVC1.5 on Magician ... while it gets the job done for the most part (well, except somehow it stopped responding to all my "Calendar" commands, despite I have it enabled in setting) I think 1.6 is more powerful.
However, just wanted to ask is MVC1.6 only for WM5? Has anybody successfully installed it on the Magician?
Thanks,
Related
Hi all,
i hope someone can help me with this, i got hold of an updated pocket pc bluetooth stack that i would like to get working correctly on my XDA2i Alpine. It's version BTW-CE 1.4.2.02 which is a massive upgrade from the 1.0 version on the Alpine. It adds a lot of new functionality etc.
It was originally for a Dell Axim but it should work fine on the Alpine, it's an updated stack of what is already there. I installed it on my XDA2i as per the instructions in the file, but did not update the registry keys. I no longer had any sound on the XDA2i at all but the bluetooth seemed to work pretty ok! :?
Then i removed all my old bluetooth keys from the registry and updated with the new registry settings included in the setup. I had full sound and functionality back then, but it could not load the bluetooth driver! It must be possible to have my extra bluetooth functionality with full normal sound by installing this package correctly but i need someone who knows more about it than me please?
File missing
I attached the bluetooth stack that i need help with to my post above so others can see and use it. Now it seems to be missing, did someone take it down? I can upload it to the ftp if i get access, thanks.
EDIT : Now it's there, must have been an issue with my browser!
what extra function you looking for in this stack indeed ?
Simple question... I'm intrigued with all the WM5 "upgrade" stuff but I really don't want to risk bricking the phone UNLESS i know WM5 can voicedial via a BT headset while keylock is *on*...
Has anyone who's done the upgrade confirm the behavior?
Thanks,
Actually, it disables it
I have a sony a Sony HBH-660 BT headset. the one with caller ID.
caller ID works but it doesnt show the names anymore; with the original ROM it would show the name.
So, no BT dialing at all.... or does it work for anyone else???
Still, upgrade is well, well worth it!
cheers,
it works perfect with hey lock, get a registry editpr, resco total cmd.
hklm/software/microsoft/voice command
change
Dword: respectKeyLock to 0 to use while phone locked and 1 not to
hmm I have no voice dial
wow! That was a fast reply...hehe.
I just checked my registry and well, found no voice dial entry at all. I guess my ROM version didnt have voice dial.
My device is an old ATT 5600, unlocked and upgraded to WM5 using roswens' package. An early version, 3.x I think.
Maybe voice dial comes with the latest versions? 4.0, 4.1... Or your phone is still on WM 2003?
later for now!
Hey cool!
Someone actually replied!
I guess I should've put in my hardware info: it's an audiovox SMT5600.
Justin, I checked the registry and couldn't find the voice command key. What phone do you have and did you upgrade to WM5?
Ooo.. I'm excited.. I can't wait to get over this stupid keylock issue...
Thanks,
I finally got my miniSD card and figured out the following:
0) I flashed my SMT5600 on Rogers to WM5
1) my SMT5600 does not have that voice command registry entry so the above hack doesn't work.
2) I tested with my bluetooth headset. and YES you can voicedial while the handset is keylocked!!!!!!!
w00t!!! I recommend everyone upgrade if they have the balls. WM5 is a bit slower, but the fact that all the PITA "features" that wm2k3 had are all corrected now.. I couldn't be happier.
Hello all,
Just thinking about purchasing a SPV M600 as a back up phone to M5000. Without using a bluetooth headset HTC can be a littly bricky to hold as phone. Used VC constantly with M5000 can I presume rightly that there is no problems with Voice Command installations on SPV M600? Thanks for taking to the time to and hopefully supply an answer.
Tom
Blackburn (UK)
No problems at all with voice commands for contacts apps etc, you can even configure one of your buttons to activate voice command. I can call anyone on my contact list with the press of 1 button
Voice Command v1.5
Thanks for giving your comments. Reaaly helpful in making my purchasing decision.
Altough you can use MS Voice Command 1.5 on the Prophet, you can experience peformance problems. You will also notice that changing your SIP could take a long time (i.e. changing INPUT from Keyboard to something else).
The problem is not the Prophet but MS Voice Command and WM5. The software has not been optimised for WM5 :-(
I have serious problems with my TyTn freezing all the time. Especially in TomTom it freezes every 2 or 3 screenclicks. Going back to the today screen (and then back to TomTom) solves the problem, but then a few clicks later the same problem.
Also in other applications the same problem, but not as often as in TomTom.
I hard resetted my device, but no solution.
Anyone the same problems (or perhaps a solution)???
I've noticed exactly the same in TomTom !
M.
same here
same here
It sounds like a low memory or storage card problem. I have had the occasional freeze in TomTom, but this is quickly solved by pressing the Windows button twice to open and close the start menu.
I have noticed that memory seems to always be pretty low on my Hermes, regardless of what I'm doing.
As for a possible storage card problem, sometimes when accessing the storage card for the first time since a soft reset, you'll see a noticeable delay as it reads icon images from executable files. This mostly seems to be a problem with older software though.
i got the same trouble but i found i got more freezing on TT6 than the older version.
let me know if you have same guys, maybe because the map size is very big (around 1go)
bye
offhand I'd say there's a problem with TomTom...
tomtom 6 freezing+web page disappears
i have the same problem,tend to delay rushing next tap of stylus,seems to solve it, it seems it cant handle quick tapping in tomtom 6.looks like a memory problem on mda vario II.olso noticed when browsing my web pages .It defaults back to today screen,for no apparent reason.
the mda vario II is a great machine,just a few bugs,to solve.
had a mda pro before but this is a far better machine
Yup I have this problem on 5.21 and not tapping too quickly solves it.
Interestingly I needed an activation code from TOMTOM (I have legit TomTom software but due to a change of PDA hardware I have used the 2 device activations TOMTOM seem to give you).
And this is what they told me ".....Your PocketPC type is not compatible with our TomTom NAVIGATOR 5. We cannot, unfortunately, guarantee that your PDA type will work free of problems in combination with our latest software. Therefore we will not be providing you with an activation code simply because your model of PDA the ORANGE SPV 3100, is NOT at the moment COMPATABILE with our NAVIGATOR 5 product."
Thanks TOMTOM :x
anybody found the solution? i have the same problem.
nmonger said:
A new version of TTN has been released, v6.100 (7979)
This has solved the problem I had on my Hermes with it locking up on the menu screens and I have seen a significant speed increase.
Click to expand...
Click to collapse
Found this under news.
I have searched before ask, i don't find anything ((( with a little map works perfectly, but this isn't a solution ((
Can you help me to find the solution?
Thanks.
I have the same problem with Cingular 8525, i flash to Dopod Rom and now works fine, i don't know if this is why, but you guys can try!
I asked the same question. I have tomtom NAVIGATOR 6 and have the same problem. I got these answers and am debating whether to flash to unlock and upgrade the AKU to 3.3. It's a big step into bandit country for me:
http://forum.xda-developers.com/showthread.php?t=295758&highlight=tomtom
I have had long debates with tomtom over its 'support'. The people I dealt with did not make me feel like a valued customer.
Hi,
In my first Athena, i have upgraded to wm6.
the major of this upgrade was the possibility to execute RealVGA soft by Tobias.
But, the BT stack has any problems (with BT-1.2 headsets).
In my actual Athena, i don't have upgraded to wm6.
the major is the good implementation of BT stack, that works fine, even with my LG Style-i.
But, the RealVGA don't works and the ozVGA and mvrTrueVGA hacks are very limited...
Please, feedback with the OS what you use in your Athena.
Regards,
Bart
Upgraded to Black Dual by PK, after Black Touch and all, so WM6, but not because of WM6 itself, only because the Athena Project builds upon it.