hello, i try to downgrad my "prophet" for apply "CID unlock" but with wrong version of rom, now i have ipl : 1.01 and spl: 2.20 and the bootloader work only with the power supply adaptator, i can connect the phone with Activesync to try romupdate utility but when is reboot i haven't the bootloader, i think the ipl is the problem , can i write the good ipl with the command "pdocwrite" ? i try write the os.nb is work . i have resultat with command "pdocread -l"
56.95M TrueFFS
| 3.06M Part00
| 2.94M Part01
| 50.95M Part02
48.23M TrueFFS
| 3.06M Part00
| 2.94M Part01
| 50.95M Part02
9.99M TRUEFFS
| 3.06M Part00
| 2.94M Part01
| 50.95M Part02
488.50M DSK1:
| 486.31M Part00
STRG handles: 4fb7d5ea
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
(486.31M) ce9da4a2
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
( 9.99M) 2ea9d13a
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
( 48.23M) 4fb23f92
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 55 22 02 01 2c 06 0b b5 1d 0b 05 d5
( 50.95M) 6fb23f3e
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 55 22 02 01 2c 06 0b b5 1d 0b 05 d5
( 2.94M) cfb23fb6
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 55 22 02 01 2c 06 0b b5 1d 0b 05 d5
( 3.06M)
may be you can help me because i don't know really the command "pdocwrite" and adress to write on a phone
hello,
i try to resolve my problem, it is possible to write a complet rom on sd card for boot and restore my prophet? i think yes but i haven't backup of rom with 'r2sd' may be you have one and i try to restore ? or if possible to transcode nk.nbf to write on sd card?
i try to downgrad my "prophet" and now i have (boot loader mode) only with AC adaptator and i see this: "
"get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that"
but my english is not well, can you try to explend me in french or by a graphic please?
[RESOLVED]
all resolved, http://forum.xda-developers.com/showthread.php?t=301030
Hi!
I own a german P4350 without any simlock with WM5 installed. There is an official RUU for german WM6 out but no RUU for german WM5.
Is it possible to backup the current ROM (OS) before an update to WM6? I'm not sure if I like WM6 and if everything will work with it. Is WM6 worth an update? Is there an (english) WM5-RUU out which accepts german devices to do a downgrade back to WM5?
Another way I thought would be a backup of the ROM.
I found pdocread /write for reading and writing the ROM but I've no clue which handle is the OS-ROM. Anyone who could explain the different handles? And is it possible to do a backup and restore with these tools?
Thanks for your help!
Chris
C:\P4350_Flash>pdocread.exe -l
56.95M (0x38f4000) TrueFFS
| 3.06M (0x30fc00) Part00
| 2.94M (0x2f0000) Part01
| 50.95M (0x32f4000) Part02
43.24M (0x2b3e000) TrueFFS
| 3.06M (0x30fc00) Part00
| 2.94M (0x2f0000) Part01
| 50.95M (0x32f4000) Part02
9.99M (0x9fd800) TRUEFFS
| 3.06M (0x30fc00) Part00
| 2.94M (0x2f0000) Part01
| 50.95M (0x32f4000) Part02
1.89G (0x79280000) DSK1:
| 1.89G (0x79120e00) Part00
20.00k (0x5000) BTD1:
| 19.00k (0x4c00) PART00
STRG handles:
handle 4dd4ccce 19.00k (0x4c00)
handle ee45f642 1.89G (0x79120e00)
handle 6e9db42a 9.99M (0x9fd800)
handle 4ea931d2 43.24M (0x2b3e000)
handle aeae71ae 50.95M (0x32f4000)
handle 4fb25ef6 2.94M (0x2f0000)
handle 2fb25ea2 3.06M (0x30fc00)
disk 4dd4ccce
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk ee45f642
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 6e9db42a
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4ea931d2
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk aeae71ae
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 0b 37 02 06 0a 02 13 10 1b 06 06 f4
disk 4fb25ef6
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 0b 37 02 06 0a 02 13 10 1b 06 06 f4
disk 2fb25ea2
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 0b 37 02 06 0a 02 13 10 1b 06 06 f4
Hi there,
I follow the steps from this forum and sucessfully dump the rom and combine all *.raw in one file (copy /b ...+....+... )
now I want to install HARD-SPL and play some roms for 6.1
but how can I switch back to original rom (which has been dumped)
anyone please help
C:\rom>pdocread.exe -l
Copying C:\rom\itsutils.dll to WCE:\windows\itsutils.dll
211.13M (0xd320000) FLASHDR
| 3.12M (0x31f000) Part00
| 4.63M (0x4a0000) Part01
| 89.75M (0x59c0000) Part02
| 113.63M (0x71a0000) Part03
3.75G (0xf0000000) DSK1:
| 3.75G (0xefc00000) N82
20.00k (0x5000) BTD1:
| 19.00k (0x4c00) PART00
STRG handles:
handle c5f4f642 19.00k (0x4c00)
handle 874c6a32 3.75G (0xefc00000)
handle 474180e6113.63M (0x71a0000)
handle c749a5a6 89.75M (0x59c0000)
handle e749a582 4.63M (0x4a0000)
handle a749a3b2 3.12M (0x31f000)
disk c5f4f642
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 874c6a32
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 474180e6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c749a5a6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk e749a582
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a749a3b2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pdocread -w -d FLASHDR -b 0x800 -p Part00 0 0x31f000 Part00.raw
pdocread -w -d FLASHDR -b 0x800 -p Part01 0 0x4a0000 Part01.raw
pdocread -w -d FLASHDR -b 0x800 -p Part02 0 0x59c0000 Part02.raw
pdocread -w -d FLASHDR -b 0x800 -p Part03 0 0x71a0000 Part03.raw
Hi
Hardreset: navipad up + reset
Bootloader: volume up + navipad down + photo button + reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Dump:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000000 to 00000001
D:\PDA\DEV\itsutilsbin-20080923>pdocread -l
134.61M (0x869d000) ONDisk0
| 5.66M (0x5a8000) Part00
| 3.45M (0x372000) Part01
| 116.89M (0x74e5000) Part02
86.63M (0x56a0000) ONDisk1
| 86.62M (0x569f000) Part00
756.00k (0xbd000) DSK5:
| 752.00k (0xbc000) Part00
15.87M (0xfdf800) DSK4:
| 15.87M (0xfdf800) PART00
STRG handles:
handle#0 a623d732 15.87M (0xfdf800)
handle#1 466670ce 752.00k (0xbc000)
handle#2 06667fa2 86.62M (0x569f000)
handle#3 666673ba 116.89M (0x74e5000)
handle#4 a6667396 3.45M (0x372000)
handle#5 c666726e 5.66M (0x5a8000)
disk a623d732
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 466670ce
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 06667fa2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 666673ba
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a6667396
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c666726e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pdocread -w -d ONDisk0 -b 0x800 -p Part00 0 0x5a8000 Part00.raw
pdocread -w -d ONDisk0 -b 0x800 -p Part01 0 0x372000 Part01.raw
pdocread -w -d ONDisk0 -b 0x800 -p Part02 0 0x74e5000 Part02.raw
My German rom: http://rapidshare.com/files/186485866/P565_V6.3.OS.GER00_V2.7.0.P4_DEU00.rar.html
i just bought one yesterday! good luck to you
Lifeforce said:
Hi
Hardreset: navipad up + reset
Bootloader: volume up + navipad down + photo button + reset
ROM Dump:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000000 to 00000001
D:\PDA\DEV\itsutilsbin-20080923>pdocread -l
134.61M (0x869d000) ONDisk0
| 5.66M (0x5a8000) Part00
| 3.45M (0x372000) Part01
| 116.89M (0x74e5000) Part02
86.63M (0x56a0000) ONDisk1
| 86.62M (0x569f000) Part00
756.00k (0xbd000) DSK5:
| 752.00k (0xbc000) Part00
15.87M (0xfdf800) DSK4:
| 15.87M (0xfdf800) PART00
STRG handles:
handle#0 a623d732 15.87M (0xfdf800)
handle#1 466670ce 752.00k (0xbc000)
handle#2 06667fa2 86.62M (0x569f000)
handle#3 666673ba 116.89M (0x74e5000)
handle#4 a6667396 3.45M (0x372000)
handle#5 c666726e 5.66M (0x5a8000)
disk a623d732
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 466670ce
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 06667fa2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 666673ba
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a6667396
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c666726e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pdocread -w -d ONDisk0 -b 0x800 -p Part00 0 0x5a8000 Part00.raw
pdocread -w -d ONDisk0 -b 0x800 -p Part01 0 0x372000 Part01.raw
pdocread -w -d ONDisk0 -b 0x800 -p Part02 0 0x74e5000 Part02.raw
My German rom: http://rapidshare.com/files/186485866/P565_V6.3.OS.GER00_V2.7.0.P4_DEU00.rar.html
Click to expand...
Click to collapse
Can you help me send your link???your links die, i can't download it
Thanks
vietphuongqct said:
Can you help me send your link???your links die, i can't download it
Thanks
Click to expand...
Click to collapse
Hi
http://rapidshare.com/files/194736510/P565_V6.3.OS.GER00_V2.7.0.P4_DEU00.rar.html
Lifeforce said:
Hi
http://rapidshare.com/files/194736510/P565_V6.3.OS.GER00_V2.7.0.P4_DEU00.rar.html
Click to expand...
Click to collapse
Thanks you verry much
Does pdocread.exe work on Vista or it just works on XP?
Thanks,
farshid.tavakoli said:
Does pdocread.exe work on Vista or it just works on XP?
Thanks,
Click to expand...
Click to collapse
works on Vista as well, have used it multiple times
mbarvian said:
works on Vista as well, have used it multiple times
Click to expand...
Click to collapse
Could you please tell me the instruction?
Thanks,
If someone helps me to dump my English ROM, I will publish it.
When should I start pdocread.exe?
Does a dumped ROM need to cook again to use in another devices?
There seems to be a little mistake in first post:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
dword: any thing other than 1 disallows unsigned
dword: 1 allows unsigned
So, I've changed this value to 1, booted my device normally - and, wow, "pdocread -l" gives me partitions list:
134.61M (0x869d000) ONDisk0
| 5.66M (0x5a8000) Part00
| 4.31M (0x44e800) Part01
| 116.03M (0x7408800) Part02
86.63M (0x56a0000) ONDisk1
| 86.62M (0x569f000) Part00
756.00k (0xbd000) DSK5:
| 752.00k (0xbc000) Part00
15.87M (0xfdf800) DSK4:
| 15.87M (0xfdf800) PART00
968.75M (0x3c8c0000) DSK1:
| 968.50M (0x3c880e00) Part00
Here, ONDisk00 is ROM, ONDisk1 is user space, DSK1 is my microSD flash card. Dunno what is DSK4 and DSK5, though it seems they are not needed.
So, after it I went:
\>pdocread -w -d ONDisk0 -b 0x800 -p Part00 0 0x5a8000 Part00.raw
CopyTFFSToFile(0x0, 0x5a8000, Part00.raw)
\>pdocread -w -d ONDisk0 -b 0x800 -p Part01 0 0x44e800 Part01.raw
CopyTFFSToFile(0x0, 0x44e800, Part01.raw)
\>pdocread -w -d ONDisk0 -b 0x800 -p Part02 0 0x7408800 Part02.raw
CopyTFFSToFile(0x0, 0x7408800, Part02.raw)
and that's all. Worked nice on my Chinese (I may post dump here if someone ever needs it).Note that offsets for Part01 and Part02 are different from German.
Code:
c:\dump>pdocread -l
Copying c:\dump\itsutils.dll to WCE:\windows\itsutils.dll
134.61M (0x869d000) ONDisk0
| 5.66M (0x5a8000) Part00
| 3.45M (0x372000) Part01
| 116.89M (0x74e5000) Part02
86.63M (0x56a0000) ONDisk1
| 86.62M (0x569f000) Part00
756.00k (0xbd000) DSK5:
| 752.00k (0xbc000) Part00
15.87M (0xfdf800) DSK4:
| 15.87M (0xfdf800) PART00
7.61G (0x1e6e00000) DSK1:
| 7.60G (0x1e6a00000) Part00
STRG handles:
handle#0 c60d5d2e 7.60G (0x1e6a00000)
handle#1 2623f732 15.87M (0xfdf800)
handle#2 c66670ce 752.00k (0xbc000)
handle#3 26667fa2 86.62M (0x569f000)
handle#4 866673ba 116.89M (0x74e5000)
handle#5 a6667396 3.45M (0x372000)
handle#6 e666726e 5.66M (0x5a8000)
disk c60d5d2e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2623f732
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c66670ce
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 26667fa2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 866673ba
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a6667396
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk e666726e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c:\dump>pdocread -w -d ONDisk0 -b 0x800 -p Part00 0 0x5a8000 Part00.raw
CopyTFFSToFile(0x0, 0x5a8000, Part00.raw)
c:\dump>pdocread -w -d ONDisk0 -b 0x800 -p Part01 0 0x372000 Part01.raw
CopyTFFSToFile(0x0, 0x372000, Part01.raw)
c:\dump>pdocread -w -d ONDisk0 -b 0x800 -p Part02 0 0x74e5000 Part02.raw
CopyTFFSToFile(0x0, 0x74e5000, Part02.raw)
My English ROM: http://rapidshare.com/files/196293101/Asus_P565_dumped_English_ROM.rar
How do you cook it?
WWE ROM (english) : ftp://ftp.asus.com.tw/pub/ASUS/Mobi...V6_12_0S_WWE00_00_M4_6_5_P7_V2_10_0_MYS00.zip
about the files of Asus P565 ROM Dump
i have downloaded the compreesed file of "Asus P565 ROM Dump" ,after i extracting the compressed file ,it have 3 files ,but how can i put it in the mobile phone ?thanx!
hello,about the Asus P565 ROM Dump
Could you please do a well-done ROM(English) ? i mean i can copy the ROM into my mobile phone directly? THANX!
bornfree521 said:
i have downloaded the compreesed file of "Asus P565 ROM Dump" ,after i extracting the compressed file ,it have 3 files ,but how can i put it in the mobile phone ?thanx!
Click to expand...
Click to collapse
It's a raw ROM. Try ftp://ftp.asus.com.tw/pub/ASUS/Mobi...V6_12_0S_WWE00_00_M4_6_5_P7_V2_10_0_MYS00.zip.
Lifeforce said:
WWE ROM (english) : ftp://ftp.asus.com.tw/pub/ASUS/Mobi...V6_12_0S_WWE00_00_M4_6_5_P7_V2_10_0_MYS00.zip
Click to expand...
Click to collapse
Thanks, It's exactly the same as my ROM. MYS is Malaysia
Chinese, German and English ROMs: ftp://ftp.asus.com.tw/pub/ASUS/Mobile_Phone/P565/firmware
English ROM : ftp://ftp.asus.com.tw/pub/ASUS/Mobil...10_0_MYS00.zip
Chinese ROM ftp://ftp.asus.com.tw/PUB/ASUS/Mobi...V6_12_0S_CHT00_00_M4_6_5_P7_V2_10_0_HKG00.zip
Anyone try this two rom yet?
Thanks!
I tried. And my device is finally English!
How flash my CZ ROM to WWE ??
Try to download a ROM update utility from above links and apply a patch:
At offset 0x000023F0 change 0x75 to 0x74.
ginkage said:
I tried. And my device is finally English!
Click to expand...
Click to collapse
How to up to new rom?
Thanks!
Hello. I have phone HTC Touch HD (T8282). It was a great bug, after it, the device reset and all data was deleted. I try to restore something with "itsutils", but I have some problems.
pdocread -l
prints:
Code:
458.50M (0x1ca80000) FLASHDR
| 3.12M (0x31f000) Part00
| 4.25M (0x440000) Part01
| 126.00M (0x7e00000) Part02
| 325.13M (0x14520000) Part03
STRG handles:
handle#0 4fda5f22 325.13M (0x14520000)
handle#1 efe5b1c2 126.00M (0x7e00000)
handle#2 cfe5b19e 4.25M (0x440000)
handle#3 afe9efc6 3.12M (0x31f000)
disk 4fda5f22
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk efe5b1c2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk cfe5b19e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afe9efc6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
and pdocread -w -d FLASHDR -p Part03 -t or pdocread -w -h 0x4fda5f22 -t
prints:
Code:
real nr of sectors: 1 - 512.00byte, 0x200
I tried with and without [-w] key, but nothing was changed.
Please, tell me, can I recover any data from this device?