Related
hi folk... first thanks to everybody... it is very good to have a place like this.... I have decided to buy an universal today... do you know any software problems on vga display... like tomtom or resco file explorer...
both of those work fine for me
Midget_1990 said:
both of those work fine for me
Click to expand...
Click to collapse
thanks for quick answer... it was a big help...
But do remember that Full VGA mode is a hack, unsupported. Apps may work, they may not. Most do work fine.
V
vijay555 said:
But do remember that Full VGA mode is a hack, unsupported. Apps may work, they may not. Most do work fine.
V
Click to expand...
Click to collapse
thanks vijay555, but I don't understand what you mean... what do you mean with full vga is a hack... by the way, I have bought it : ) it is a very nice toy with a fantastic display... and it is so quick as my BA....
v is refering (can't spell it - damn dyslexia) to a hack that is avaliable that makes the screen size 4 x bigger, this is quite nice for fitting more information ont he screen but remember everything is 4x smaller and hard to read. also resco explorere doesnt work with the hack (takes up 1/4 of the screen). tomtom has no problem.
rind9 said:
thanks vijay555, but I don't understand what you mean... what do you mean with full vga is a hack...
Click to expand...
Click to collapse
see for example http://www.aximsite.com/boards/showthread.php?t=98163
I was at party yesterday. And there I 've seen a Vario II with a program named "Super Bright". Has anyone this prog for the prophet?
In Gullums Prophet VII it´s integrated.
Schaeferreiner said:
In Gullums Prophet VII it´s integrated.
Click to expand...
Click to collapse
Oh yes. There I 've seen it on my device. But I try an other ROM today and there is it not installed. Give it a cab file from the prgramm?
not tried superbright but google tells me...
http://www.vijay555.com/vj/releases/vjlumosiii/vjlumosiii.exe
is it the same?
toggles full brightness on/off
says it's for hermes there, but, y'know....
he who dares, Rodney, he who dares, my son.
triplejay said:
http://www.vijay555.com/vj/releases/vjlumosiii/vjlumosiii.exe
is it the same?
toggles full brightness on/off
says it's for hermes there, but, y'know....
he who dares, Rodney, he who dares, my son.
Click to expand...
Click to collapse
I 've tried Version 2. They didn 't work. I will try v3.
just FYI v3 def. working in my prophet. If this is the same file cooked in the ROM as VJ's app, then a little credit to him would be nice. If it's not, then ignore me
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
What does this do exactly?
it keeps the proximity sensor active when using bluetooth so if you put it in your pocket the screen automatically turns off when you pull it out of your pocket it turns on
Thanks for sharing!
I´ll give it a shot
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Mesquire said:
Is this for wm6.5 only? The proximity sensor works on my TP2 (wm6.1) without the patch.
Click to expand...
Click to collapse
the proximity sensor does not work in some roms, when i wrote this app i was using a rom that it did not work. I have not used tp2 on wm6.1 so i did not know that.
does this cab change a registry key or does it act in another way?
thanks
airon11 said:
does this cab change a registry key or does it act in another way?
thanks
Click to expand...
Click to collapse
change registry
irus said:
change registry
Click to expand...
Click to collapse
which is the key changed?
thanks
Thanks IRUS.
I'll check it out and post back although I'm sure that it works now given that you fixed it.
airon11 said:
which is the key changed?
thanks
Click to expand...
Click to collapse
HKLM,System\state\phone\PSensorStatus
irus said:
HKLM,System\state\phone\PSensorStatus
Click to expand...
Click to collapse
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
airon11 said:
thanks for the info..
so if i understood correctly, ther's an executable that runs on background and changes that key to 1 also when the bt handsfree is on.right?
Click to expand...
Click to collapse
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
irus said:
well you won't be able to tell cause the proximity sensor works with out my app if you don't have bt on
Click to expand...
Click to collapse
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
airon11 said:
i know that..i was just curious to understand what your cab is doing, and i saw the process running..i was asking for this reason
Click to expand...
Click to collapse
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
irus said:
sorry i guess im not understanding what you are saying so let me frase it another way. the app checks to see if your on your phone, it does not matter if your using bt or not, then enables proximity sensor if your on the phone even if your not using bt. hope this helps
Click to expand...
Click to collapse
ok, thank you for the explanation.i was trying to understand how it works and when..now it's all clear!
irus said:
Ok so i was using shadowline's rom and i noticed that in his rom if i was using my bluetooth headset the proximity sensor was still active. His rom was the only one that had this out of all the roms i tried. So i wrote a little app to enable this is every rom. I have only tested it on EnergyRom 6.5.1 but it should work on any rom. You will need .net3.5
**EDIT**
I have made a little fix so that dot fred task manager works with this app
Click to expand...
Click to collapse
hi
i have a htc tp2, proximity sensor is always on also when on bluetooth, can i disable this promixitysensor?
thanks
nolan