atom stealth EziText - iPAQ rw6828, XDA Atom General

I just recently purchased an atom stealth. Its been ok so far except for the Ezitext "multi-tap" recognition of the letters I input on the keypad.
Its very slow for typing letters. It takes about less than a second for the letter to get accepted. During the "wait time", it basically waits to see if i will change the letter I chose.
Is there any way to tweak the input method to make it recognize the letters I key-in faster?
Its very slow for SMS standards, expecially in the Philippines where Texting is an everyday communications medium.
Thanks in advance.

Good news
I just upgraded my ROM and the eZiTEXT bug has been fixed so smsing is almost like a nokia keypad There is also a multi-tap feature installed if you are more comfortable using that over ezitext.
see the forum http://forum.xda-developers.com/showthread.php?t=282292&highlight=stealth "where can i find english rom for o2 atom stealth?" and download it from the link provided there by the user wepinbell2000

Thanks.
May I ask for a favor..... (and for all who upgraded to the new rom)
Can you try the multitap function and is if you can immediately move on to the next letter, of if you can immediately choose a new key right after another?
say...... if you press "2" then immediately followed by "3" on the physical keypad, do you get both the letters "a" and "d" or do you just get "d"?
this is the problem i have on my curreny rom 061128, it only recognizes the last letter i chose, not unless I wait for the letter to be accepted which takes about 3/4 of a second.
I text very fast using multitap (like in nokia).
thanks again.

EZITEXT a big mess....
any one out there who knows how to tweak/fix eZitext on my XDA Stealth... device performance is acceptable enough, but the built-in sliding pad is a big HEADACHE...
i think the design of the keypad is meant to have the STEALTH perform as a normal phone (eg NOKIA series) for text/nos inputs, but the functionality is far worst than expected...
1) eZitext has no options/menus to change some settings...
2) whenever a push on the keypad is conducted, it would be recognized, but the device will start to provide SUGGESTED WORDS that totally BUGS me OFF...
3) for fast texters, TYPED letters are not automatically displayed, leaving it to wait for additional characters thus waiting for suggested words to be formed...
Why can't they make that KEYPAD worked like the KEYPAD of XDAIIs... "WHAT YOU PRESS IS WHAT YOU GET"... regardless of what keypad options you choose... i would rather want to see this device performing, like when i want letter "C", i just need to press "2" 3x...
eZitext is annoying and should be named as EZ---- hehehe...
thanks for the future help...

Related

Text Message Contact Choosing

I have just upgraded to the new official WM 6.1 ROM, and have noticed that before, when I would type a new text message and begin typing in the name of one of my contacts in the "To:" box, their name and number would come up so i could just choose it without having to type out their full name. Now I can not do that anymore, I am not sure if it is after installing the touch (original not diamond) keyboard because i never tried text messaging before installing it. Is there a way to get this feature back, because it is much easier than having to click menu add recipient.
Also, for the touch keyboard, is there a way to choose the full qwerty keyboard always, because whenever i try to make a new text message, I can only get the phone pad like keyboard (three letters per block) or the qwerty with two letters per block, is there a way to always get the full qwerty?
killerkhatiby009 said:
I have just upgraded to the new official WM 6.1 ROM, and have noticed that before, when I would type a new text message and begin typing in the name of one of my contacts in the "To:" box, their name and number would come up so i could just choose it without having to type out their full name. Now I can not do that anymore, I am not sure if it is after installing the touch (original not diamond) keyboard because i never tried text messaging before installing it. Is there a way to get this feature back, because it is much easier than having to click menu add recipient.
Also, for the touch keyboard, is there a way to choose the full qwerty keyboard always, because whenever i try to make a new text message, I can only get the phone pad like keyboard (three letters per block) or the qwerty with two letters per block, is there a way to always get the full qwerty?
Click to expand...
Click to collapse
It has been my experience that this is due to the Touch Keyboard. I had that same problem, along with characters not typing correctly when I used the hardware keyboard, that made me un-install it from my Sprint Mogul.
Also, it is a known problem with the Touch Keyboard that it will not let you select the full QWERTY keyboard. I know there is a fix for it by using an altered Touch Keyboard, but when I tried the altered one it also had the same problems as the original, so I un-installed that one as well. My advice to you would be to un-install the Touch Keyboard and use something else like PCM Keyboard, that is the one I use most.
Another thing, it might take quite a long time for the Touch Keyboard to un-install. I know I had to leave my phone sit for about 10-15 minutes with the wait cursor spinning around in the Remove Programs setting before it finally was deleted.
I hope this helps!
its not a keyboard problem thats how 6.1 is my phone does the same thing regardless of what keyboard im using
it seems to be a problem with the touch keypad, as after uninstalling it, I am able to select my contacts for a text message as soon as I begin typing their name. Thanks for the help.

No word completion pop-up

I've become the proud owner of a Touch HD just yesterday. The thing I find oddest about it so far is that I don't get any word completion pop-ups as I enter text. I'm not talking about just the HTC-specific input methods either; it doesn't happen even when I use the Letter Recognizer or the standard Windows Mobile keyboard.
I've turned on all options I could find that looked remotely related to this, and I have yet to see a single word completion pop-up since I got this device. Am I missing something or are those pop-ups not available on this device for some reason?
guney said:
I've become the proud owner of a Touch HD just yesterday. The thing I find oddest about it so far is that I don't get any word completion pop-ups as I enter text. I'm not talking about just the HTC-specific input methods either; it doesn't happen even when I use the Letter Recognizer or the standard Windows Mobile keyboard.
I've turned on all options I could find that looked remotely related to this, and I have yet to see a single word completion pop-up since I got this device. Am I missing something or are those pop-ups not available on this device for some reason?
Click to expand...
Click to collapse
i can't speak for all methods, but i always use HTC's FULL QWERTY, you just need to "flick the switch" from "ABC" to "T9", this switch is somewhere to the left of the space bar. hope that helps
buggybug0 said:
i can't speak for all methods, but i always use HTC's FULL QWERTY, you just need to "flick the switch" from "ABC" to "T9", this switch is somewhere to the left of the space bar. hope that helps
Click to expand...
Click to collapse
Thanks. Just tried it, but that's not what I'm talking about. If you haven't used another Windows Mobile device before (and Palms using graffitti used to have this too, I think), you might not have seen this, but when writing on the keyboard or letter recognizer (or block recognizer), WM pops up a menu of completion options after you type in one or a few letters (depending on your settings). For example, if you type "ob" you might get a list that contains "obese, obstruct, obvious"; and when you add a "v" to make it "obv", the list would refresh to show "obviate, obvious", etc.
What you've described to me is just the T9 guessing mechanism, which always suggests options with the same number of letters as the number of keys you've typed to that point. It only makes sense when there is more than one letter per key, so that, when you type, say, a sequence of three keys, there is ambiguity in which combination of the multiple letters on each of those three keys you might have meant, and the device shows you options of these combinations to pick from.
Incidentally (and this may sound pedantic, but), for that same reason, I don't see any point in using the T9 setting with the full QWERTY keyboard as you suggest, since there is no such ambiguity and the option that you'll see suggested is precisely what you've typed anyway.
If you've seen the other kind of completion options (i.e., "complete words for partial typing") let me know...
guney said:
What you've described to me is just the T9 guessing mechanism, which always suggests options with the same number of letters as the number of keys you've typed to that point.
Click to expand...
Click to collapse
I'm sorry. I noticed that what I typed above wasn't correct.
I wasn't seeing full word completion suggestions in response to partially typed in words in T9 mode because I had the "word completion in T9 mode" option under "T9 Settings" disabled. Enabling it does provide full word completion suggestions after typing only a couple of keys. I stand corrected.
On the other hand, that's still not what I'm looking for, because that only provides a couple of options displayed horizontally on one line. You can't fit many word options onto that line. (At least not the longer ones.) I'd like to see the standard Windows Mobile behavior of popping up a menu of vertically stacked completion options where you may be presented with up to four selections of any length (sometimes including even multi-word completion options). The HTC-specific input methods with their own peculiar completion behavior are fine by me, but I don't understand why I don't still have the default Windows Mobile completion behavior when I switch to one of the standard Windows Mobile input methods!
Actually, even the HTC-specific input behavior is a little screwy. There's also a "word completion in ABC mode" option under T9 Settings, but even when I enable that, I get no word completion options after switching to ABC mode in the compact QWERTY or full QWERTY input methods...
A few things definitely seem wrong with word completion behavior on the Touch HD. I just hope someone here might have enough insight into the matter to know of a fix or workaround...
guney said:
Actually, even the HTC-specific input behavior is a little screwy. There's also a "word completion in ABC mode" option under T9 Settings, but even when I enable that, I get no word completion options after switching to ABC mode in the compact QWERTY or full QWERTY input methods...
Click to expand...
Click to collapse
Scratch that... I've seen this work now too. I suppose it was a little stubborn, or needed a close-and-reopen of the keyboard first...
In any case, my original issue still stands: I'm looking for the "plain old" Windows Mobile word completion suggestion pop-up when using letter recognizer or the standard keyboard, with the vertical list, which fits more options of longer words.
If anyone knows of its whereabouts, please chime in!
guney said:
A few things definitely seem wrong with word completion behavior on the Touch HD. I just hope someone here might have enough insight into the matter to know of a fix or workaround...
Click to expand...
Click to collapse
I was about to start a post just like yours..I've enabled word completion but I don't see anything. Also, when I open the tool Dictionary Editor I don't see any suggested words at all. And when I add one or two of my own, it still don't work. There must be someone who knows more about this issue ???
bump...this would be helpful
also, does anyone know how to make it so T9 starts suggesting words after typing only 1 letter?
Copied from the Diamond Forum ...
beemerTPPC said:
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
Click to expand...
Click to collapse
... this should fix the problem. Kudos to beemerTPPC.
Gave to above a go, but found those settings were already there!
But strangely, after a couple of soft off/ons the letter recogniser, block recogniser, standard keyboard and SPB keyboard all have word completion.
The HTC offerings are weirdly different;
The full qwerty only offers word completion when you type the first three letters of a word then hit backspace to delete the last character typed. The same happens with the compact qwerty and phone keypad, but rather madly they will not let me type letters at all... only numbers... very odd!
The above solution enables me to have the Word Completion popup witth the following keyboards: 'keyboard' and 'block recognizer' and 'letter recognizer'.
It is not supported with the 'Full QWERTY' (my main keyboard).It removed the T9 completion that was there (and was not adequet). Now I cannnot use both ABC and T9 modes.
Is there a way to have both the T9 and the word complete popup, or at least the latter (the ppopup word complete) when in ABC mode on the 'Full QWERTY' keybord?
Please advice
Thanks
gadgetuk437 said:
Gave to above a go, but found those settings were already there!
But strangely, after a couple of soft off/ons the letter recogniser, block recogniser, standard keyboard and SPB keyboard all have word completion.
The HTC offerings are weirdly different;
The full qwerty only offers word completion when you type the first three letters of a word then hit backspace to delete the last character typed. The same happens with the compact qwerty and phone keypad, but rather madly they will not let me type letters at all... only numbers... very odd!
Click to expand...
Click to collapse
I am in the same boat as you
How are you going with this Monkey of a problem?
Ive tried everything.
Please reply
Run HD Tweak
20. Keyboard (SIP)
20.2 T9 Mode
set it to Disabled
Soft reset
HTH

Autocompletion/Autocorrection solved

For those of you frustrated with the autocorrect/autocompletion method of the Touch HD (who want the old Windows style back) here is the solution. It lets you still use the Diamond Keyboard and real autocorrection/autocompletion like the good old days. It was written for the Fuze but they have the same keyboard and software issues.
The complete solution with hyperlinks is located here: http://www.fuzemobility.com/?p=1527
Here is the text (the hyperlinks and photos were lost):
Many of you have seen my rants about the lack of traditional autocorrect and autocomplete on the Touch Pro (see here where I did it in a posting on editing the T9 dictionary, or here where I did it in our forums, and here where I did it at XDA (I’m BugsyKoosh)). Why was I so angry? For anyone who used an older Windows Mobile phone knows, the old method of autocompletion was far better than what the Fuze has. First off, when entering a contact the old method provided for a longer list of names that you can click on (whereas the Fuze guesses the single closest one and almost forces you into it). Then when actually typing words the Fuze gives you a few words but I always found it very finicky and ultimately turned it off because the space bar caused the word to complete and the spacing was off. Also, the Fuze wasn’t good at correcting mispelled words. It gave you a dictionary that would complete the words but if you spelled it wrong (because you didn’t use autocompletion and just kept typing) that meant you had a typo. The old style was a list of words as you typed in a drop down (you choose starting from 3 words) and it was both autocomplete and autocorrection so anytime I spelled the word ’spelled’ as ’spellde’ it will change it for me and it works a lot smoother. Also, the old style permits for word replacement using autocorrect so when I type the letters "pcm’ in the old style I edited it so it was replaced with ‘please call me if you have any questions’ and ‘tx’ was replaced with ‘thanks’. In fact I wrote a posting here on TiltMobility describing methods of changing the autocorrect files thinking I would port it over here just to get burned realizing that the Fuze simply wouldn’t do it…until now.
[Warning, this is a little long and filled with detail but I think the payoff is gigantic so please bear with me]
For definitional purposes, autocorrection is the ability to change a typo whereas autocompletion is guessing what I’m typing before or while I type. I cannot change the autocompletion dictionary at this time (the one that guesses as you type). This does propagate itself over time and it will get to know you. It also cannot be transferred from older devices. See this article for more information on why it is so hard but until DictMgr is updated we may be SOL (TVDinner was told by the author that an upgrade is in the works so lets all cross our fingers).
So the first step is to disable T9 (this is the method of autocompletion/correction I hate). The cab is posted here in our forums (I was provided this cab from a member at another forum). Don’t worry because you can uninstall this application and revert back (it’s a simply a single registry change actually). Once installed restart your phone for it to take effect. Then, go to Settings - Input and make sure all of the options for Word Completion are checked (you can change the number of words it suggests - I use three). OK now there’s one little glitch. My problem from the start was that the autocomplete method I like did not work with the Full QWERTY Keyboard (you know, the shiny onscreen keyboard that our Fuze comes installed with and is in the photo). It seemed like it would work and then stop and ultimately I was thinking I would be forced to install another keyboard (more on that later). After messing around with the keyboard I realized that I can get the Full QWERTY Keyboard to work with the old method. You have to make sure that the ABC-T9 toggle is set to T9 (look at the photo and you’ll see T9 is selected even though we disabled T9 entry). If you try to toggle it and it will not let you then try this: press the ABC-T9 button and try to toggle it, then hit the .,123 button and try that a few times until it flips over (if that doesn’t work do the same thing after going into portrait mode and toggle T9 and ABC). Have patience - it will toggle and once it does it stays that way. Now here’s the one flaw - the autocompletion with this keyboard only appears when there’s an odd number of letters (ex on the first, third, fifth) [note: autocorrection happens after you misspell a word so it works with this and any of the other keyboards]. Again, we can correct this with a different keyboard but we’ll get to that. What you’ll notice is that completion of contacts and words is instantly different and I think a lot better. Also, the library will build over time as it knows you and aside from correcting the words you type wrong it will get to know you and start to guess the next word before you even type it (it may even guess a few words at a time and by the time you make it to ‘tha’ it will give you an autocompletion option of ‘thank you very much’).
If you do not use the onscreen keyboard because you’re a physical keyboard kinda person then you’re in luck. Simply set the onscreen keyboard to the keyboard named ‘keyboard’ (it’s the crappy Windows default one) and you’re set. That one works like a charm with no nuances (but is miserable as an onscreen keyboard).
Before I let you all go on your editing ways, lets talk about one solution that gets rid of the nuance of only getting autocompletion on odd numbers (so it works on each letter you type) and that is by using a different onscreen keyboard (sorry, but I believe PocketCM uses T9 so it won’t work). If you use the onscreen keyboard and want to get past this nuisance then simply install freeware Happy Tapping Keyboard. In the attached photo I changed the skin to the iPhone skin (it is in that link provided - use the VGA skin). If you set Happy Tapping as your default keyboard it will not survive a soft reset even if you set it as the default input method. To do this install the Default IM cab and set it as the default keyboard (Settings - Input) and set it as the default keyboard in Default IM and it will stay with you. Happy Tapping is a great keyboard but personally I like the layout of the Full QWERTY Keyboard better, especially the shadowing of the buttons so you know its second function. And I learned that Happy Tapping is missing a ‘\’ key which was a burn when I was using Total Commander but I bet for the rest of you it’s meaningless. I will confess I used Happy Tapping for all of my 8525 and Tilt years and it is really very good.
So, in either event, lets change the dictionary so that typos are corrected (or in my case quick text can be created). You don’t need to do this but it’s a nice perk of using this method. There are two ways to do this - the application method and the Total Commander method. The first one is highly recommended for those of you who want simplicity. Simply install freeware DictMgr and go to the "word correction’ tab and you can begin to add words. The downside is that I only see the first few series of words (I don’t even get out of the A letters) but this doesn’t impact adding new words regardless of their first letter. If you use this method it make sense to use freeware MyMobiler so you can use your PC’s keyboard for ease. For those of you that want to see your entire dictionary and don’t mind a little Total Commander action then all you need to do is navigate to Windows and find a file named autocorrect.04…. You can open this in Total Commander (hit the pen/paper at the bottom) or move this file to your computer, edit it there and then move it back to your Fuze (change the settings to take it out of hidden/system). In either case, if you’re willing to use Total Commander there’s another benefit if you’re a former Windows Mobile user since you can get the file from your old phone and move it to your Fuze (I moved mine from my Tilt) but you can do both (move the old file using Total Commander and then edit it using DictMgr). For a step by step set of instructions on using Total Commander to modify the autocorrect file read the article I wrote here on TiltMobilty. In either case you MUST reset your phone for the changes to take effect (the file is read into ROM at startup). Be careful with autocorrection words (obviously you can change it later) but if you change ‘tx’ to ‘thanks’ that means in a text message you cannot use tx (it will correct itself to thanks) so think of variables like ‘thx’ changes to ‘thanks’ for emailing and ‘tx’ stays uncorrected for texting.
This will work for all versions of the Touch Pro, the Diamond and presumably the Touch HD as they all use the same keyboard configuration.
Wow, I feel like we’ve done a lot. I’m drained but relieved that my single biggest complaint is gone. A special thanks is owed to SCDavis who was the first person to try my disableT9 cab even though I warned him of a possible hard reset since I wasn’t sure what it would do and if it was uninstallable and of course to TVDinner who was with me for the autocorrection ride both in our forums and on XDA’s and brought DictMgr to my attention.
Thanks for the write-up. I must admit I tried the word completion for the full QWERTY keyboard and spotted a few bugs so I haven't used it since. Last night I decided to try the phone keypad as an alternative to the full QWERTY so I'm back in the world of T9 and word completion. If I have too many problems with it then I'll try your solution.
T9 is very very painful in my experience. The correction is poor and you don't have control over it and there's no autocorrect (spellcheck). I'm a fan of the old style a lot more... hope it helps - good luck
what is your post for? is there ia cab or file to autocorrect/autocompletion?
thank you.
Here's the cab and the quick version of what is needed. This all works tog et you back to the old style of autocorrection and autocomplete that Windows has and is much better than T9:
1) Disable T9 by cab and soft reset
2) either use the Windows keyboard (which is poor for onscreen use) or Happy Tapping (which requires the Default IM cab to be your default input) OR to use the Full QWERTY Keypad (the preset default keyboard) you need to toggle T9 to on (even though T9 was disabled) and to do this toggle it, hit the 123/abc button a few times until it sticks and you’ll get the old style completion/correction with that keyboard
3) to change the autocorrect dictionary find the autocorrect file in your Windows directory and change it using Total Commander (or other registry editor even though this is not in your registry) or DictMgr
it's interesting. But it seems that T9 use another dictionary that you can choose. Once T9 is disabled, the autocomplete dictionary is back to english, and I don't find the way to change it
any idea to do this ?
Sorry for OT, but I found touchpal to be much better.
It is commercial though, and does not support landscape properly as of version 3.5.

How to fix the word complete/predictive text bugs?

Hi guys
My Touch HD has this really annoying habit of inserting words I don't want it to when it tries to complete the word I'm typing. Sometime it will put the word in twice (e.g. "todaytoday"), and other times when you finish typing and hit space it replaces what you've typed with whatever word it thought you were trying to write (e.g. writing "labe' then hitting space it will automatically change it to "label"). The default is for it to replace your word with one it recognises, rather than accepting your word by default and giving you the option to choose one of its suggestions.
My old dopod d810 had a more logical/reliable word complete function than this Touch HD!
Anyone have any suggestions?!
dkwalsh said:
Hi guys
My Touch HD has this really annoying habit of inserting words I don't want it to when it tries to complete the word I'm typing. Sometime it will put the word in twice (e.g. "todaytoday"), and other times when you finish typing and hit space it replaces what you've typed with whatever word it thought you were trying to write (e.g. writing "labe' then hitting space it will automatically change it to "label"). The default is for it to replace your word with one it recognises, rather than accepting your word by default and giving you the option to choose one of its suggestions.
My old dopod d810 had a more logical/reliable word complete function than this Touch HD!
Anyone have any suggestions?!
Click to expand...
Click to collapse
Try disabling the 'Suggest Words' using 3rd party apps like HDTweak (Section 20)

EzInput 2 Compact QWERTY Keyboard issue/query

I have a Diamond with BsB6.5Q ROM.
Hi there, don't know if this is a ROM issue or a WM6.5 issue. I use the Compact QWERTY that is supplied in this ROM - I prefer to use the "phone keypad" style of keyboard. As I do 95% of my texts in the native Welsh language, I keep T9 switched off (there is no such feature in Welsh). However, when I write a text message in Welsh sometimes the spacebar won't work - it simply won't let me put a space there - I have to press 'enter' then 'backspace' to remove the restriction. This is not a screen sensitivity issue, because the 'shadow' appears above the spacebar to signify that it has been pressed. This problem doesn't arise when writing English texts, so I'm assuming that the problem occurs because the phone is trying to be clever and trying to predict that there shouldn't be a space after a certain letter.
I've looked through the settings and I can't find anything to switch this off. Any ideas?
Also, when writing, I would really like to be able to move the cursor backwards and forwards through the text, say if I want to correct an earlier error. Having to press the desired location with my finger is not good enough, because I need three or four attempts to get it right due to being the owner of a large thumb. I was then thinking about the Diamond's scroll wheel - this would be ideal for the job. Is there any way use that to scroll, i.e. anti-clockwise to move cursor to the left, clockwise to move right?
Thanks
Right, please ignore my last paragraph above - I completely forgot about the up/down/left/right buttons around the scroll wheel. The Left/Right buttons do exactly what I want.
Now, all I want is a fix for my keyboard problem (1st paragraph). It only happens for some words, and when it happens I cannot type any of the punctuation characters - I can only continue typing letters. Also when this happens the word (or most of it) is underlined. I don't understand why the word that's currently being typed would need to be underlined. It seems like parts of T9 is still on, even in ABC mode.
Any ideas?

Categories

Resources