Hi,
My wizard run out of battery completly yesterday, I brought it home and try to recharge it, but no recharging light will appear.
I left it overnight connected to the mains but to no appeal,
I also removed the battery for a few minutes and then plug again but no luck.
I´m not using the mains provided adaptor but my travelling kit, a proporta mains/usb adaptor and a retractable sync/charge cable with a mini-usb pin cos I´m back home for Xmas and I don´t travel with the mains.
I have read about problems with some chargers from Boxwave, but I have consistently using this charging conbination since October.
Any ideas, should I send it back to expansys to repair, or is there anything else I can try?
Thanks
Elsral
same thing happened to me.. Supposely the phone will not charge from being completely dead without a charger that puts out 1amp. There is another method if you are a little brave... cut up an old car charger and hook it directly to the battery (red cord to + on battery and black to -) Read about it on howardforums and it worked like a champ. I only needed to jump the battery for about 30 seconds before I put it back in the phone and the amber light kicked on.. I was very relieved!!
Same happend to me yesterday. Simply plug the carger in and wait 1 or 2 seconds then switch the power button. After some seconds the carging light should switch on.
The wizard won't charge if it's switched off.
Export800,
you are a megastar,
I put apart a usb adaptor that I had built to charge my gps and I connected cables directly to battery for a minute and Voile,
tnx a million,
elsral
Xunil99 said:
Same happend to me yesterday. Simply plug the carger in and wait 1 or 2 seconds then switch the power button. After some seconds the carging light should switch on.
The wizard won't charge if it's switched off.
Click to expand...
Click to collapse
But if the battery is totally dead surely the unit wont switch on ? Thus its a catch 22 ??? There is no power to switch on and the battery wont charge totally dead.
Ridiculous if you were caught out away from a charger and ended up having to pull apart a usb lead to get things back to life.
If the battery is so low, that the wizard switches off itself, and you connect the charger, it won't charge, because it's switched off.
Use the power of the charger to turn it on, then charging will beginn (and also the device will boot).
Xunil99 said:
If the battery is so low, that the wizard switches off itself, and you connect the charger, it won't charge, because it's switched off.
Use the power of the charger to turn it on, then charging will beginn (and also the device will boot).
Click to expand...
Click to collapse
Can anyone else confirm this works as there have been many people having this problem. Simple solution if it works.
Switch off your device completely (hold the Power Button) and try to charge: Nothing happens. Now switch it on - charging begins.
I have noticed that last week, when battery was very low and i know that i would need my wizard in about half an hour. So i switched it off completely, so that it would charge faster and noticed that.
Yesterday when battery was totally dead i remembered that and i switched it on.
Btw, doesn't it damage the battery, if you connect it to 12 V (!!)??
Xunil99 said:
Switch off your device completely (hold the Power Button) and try to charge: Nothing happens. Now switch it on - charging begins.
I have noticed that last week, when battery was very low and i know that i would need my wizard in about half an hour. So i switched it off completely, so that it would charge faster and noticed that.
Yesterday when battery was totally dead i remembered that and i switched it on.
Btw, doesn't it damage the battery, if you connect it to 12 V (!!)??
Click to expand...
Click to collapse
If I come across the problem will certainly be trying your method before I will be ripping into any usb leads
The same thing happened to me this past weekend. We were out camping and my MDA's (wizard) battery went completely dead. I had a USB sync cable for my laptop, but that would not revive the unit. I'm afraid the only way to bring it back to life is with the original OEM charger which has an output of 1 amp. Thanks for the post!
I had the same issue a while back. At first I thought the moto charger I had was dead but then I plugged in a old SMT5600 and it worked fine.
I left it plugged into my computer for a hour or so and finally I heard the "new usb device blip" from the other room and it started to charge. Guess I was lucky.
Same thing happened with my wifes SMT5600. The battery died and she couldn't get it to charge with her moto mini usb charger. I plugged it into my machine and a hour later the charging light came on.
I have heard that the Wizard will not charge from my laptop using a usb cable if it is completely drain. I find this to be NOT TRUE.
I ran out of juice twice last weekend. The thing about the Wizard is that, if it's completely drained, it will get stuck at the boot screen, and go no further.
Take out the battery to turn it off again. Put the battery back in, and then plug in your charger. DO NOT TURN IT BACK ON. It needs all the power it can get. Give it a minute, and you will see your orange charge light come on. Just leave it alone for several hours, and it will charge. This is my experience.
I got it! But, first the story.
None of the above methods helped me. I tried plugging it in to a big truck lighter, a pickup truck, even an ac adapter for my coleman cooler. Nothing!
However, I had a powered Pro-Clip mount that I had as a backup for the one I use. Guess what? THAT worked!
I think the cable makes the difference. Need to find the specs on those puppies. LOL
Thanks for the help.
Hi.I received a xda min s in monday and after a day of use the battery is discharged so I charged the phone with computer's usb port and the charging led is switched on. When I came back I tried to turn on the phone but it seems dead ... It is on just a few times and went off immediately after the first screen.
Anyone can help me ? Thanks
Hi,
Just been through the same with mine. Thought it was the battery, so got a new one via ebay. Had the same problem, long story short, it turned out to be the usb cable, changed it and new battery charging fine. Looks like the old battery was fried as will not accept a charge any longer. The cable fault was rapidly discharging the battery, even though it indicated it was being charged. Hope that helps.
Hi there! I just bought a Cingular 8525 Unlocked phone and absolutely love it! After having it for two weeks, so far i have upgraded to the 2600mah extended battery and i am currently using PDACorner v20 rom (nonRBSN)
Now to my question, is it bad for the phone i keep plugging it in randomly throughout the day on the charger or USB? I upload files sometimes and i just leave the phone plugged in the computer or I would sometimes charge the phone when it hits 70% and unplug when done and would charge again before going to bed.
Also, is it ok if i leave the phone on the charger even if the light turns green? sometimes charging would be done around times when im knocked out....and usually dont unplug it until i have to leave.
Thanks for your help/replies.
h2opoloplyr_11 said:
Hi there! I just bought a Cingular 8525 Unlocked phone and absolutely love it! After having it for two weeks, so far i have upgraded to the 2600mah extended battery and i am currently using PDACorner v20 rom (nonRBSN)
Now to my question, is it bad for the phone i keep plugging it in randomly throughout the day on the charger or USB? I upload files sometimes and i just leave the phone plugged in the computer or I would sometimes charge the phone when it hits 70% and unplug when done and would charge again before going to bed.
Also, is it ok if i leave the phone on the charger even if the light turns green? sometimes charging would be done around times when im knocked out....and usually dont unplug it until i have to leave.
Thanks for your help/replies.
Click to expand...
Click to collapse
Well, I don't think that's such an easy question to answer. There have been the following reports:
1
Attempting to charge the battery with either PC USB or non approved charger (500mA) if the phone has less than 10% charge can lock up the charging circuit and result in a Red no charge LED showing.
2
Leaving the phone on charge overnight for example can result in the curious situation of having a flat battery and RED LED showing in the morning.
3
In general problems can result if 500mA 5v chargers are used instead of the 1000mA official charger - particularly if they are used when phone charge is low.
Now despite all the above, I regularly charge overnight without problems - and clearly that means the green LED is on for most of the night. I frequently top up the phone with the PC USB and do sometimes use a non standard charger. I have only ever had the RLOD red light of death once and was able to kick start it eventually.
I generally do not let the phone fall below 20% - but even when it does I have had no problems.
Mike
Thanks for the reply. I never let the phone fall below 40% so i should be ok on that. But when i bought the extended battery it came with a wall charger but its 500mA.....im guessing its ok for the battery since it was packaged with it.
But i might look into buying a charger from ATT. Leaving it charged till i wake up should be ok then....thanks!
Hi ... i'm using Android with my hd2 and i installed it on Thursday and everything has been fine until this morning. My battery died last night and when I went to plug it in, the little charging light didn't go on. it turned my phone on .... and said that i need to plug in my charger. i've had it plugged in for a while now and it's not charging. if i unplug it, it turns off because its battery is done ... HELP me please!!!!!
Doesn't sound like a battery or android issue. My guess is that your charger has worn out. Try using a different micro usb cord.
I thought so too ... so this morning I had it charging at home and the same thing happened ... I came to work and plugged in a different charger into my USB..... and no difference.
Hi! I have a HTC P4350 with a big problem. He don't want to charge the battery. Actually when i plug in the charger he say that it's charging until the green light apears. Let's say that i've plug in the charger at 51%; the phone it's charging until 100% but when i'll disconnect it the battery will decrease again percent by percent and in five minutes or something the level will be again 51%. I have an external charger which it's charging corectly my battery but it's annoying to change the battery to the charger, and when it's full back to the phone over and over again.
So, the battery it's fine, i can connect the phone to the PC and i can sync it so the USB it's fine...
One more thing: the phone was started to do that 2 years ago. I bought that external charger and i used it for 6 months after I've don't use it(the phone) until 2 days ago. So, i've put it in charger and it worked at the first push of the button. I've left it in charger by the night but in the morning i've got an RLOD. So i've use the old external charger and the phone works, only with this problem... he won't charge.
Any ideas? Thanks and sorry for my English