Calendar & Call End Buttons - JAM, MDA Compact, S100 General

Hi,
my calendar and call end (red hang up phone button) are not working.
the call end button is not working at all.
the calendar button is working very rarely and is only once or twice.
i have not installed any new software, the last thing i did try was press the middle nav button and the calendar button at the same time to bring up the align screen program.
otherwise i have no way of opening the calendar and have to tap on screen to end a call
if anyone can offer any help (short of a hard reset) it would be greatly appreciated.

Does a soft reset not solve the problem? It could just be dirt.

sorry was short on time and forgot to mention that a soft reset does not fix it.
:/

Related

Problem when press Receive Phone and Hang up Phone together

I just wonder why when I press both (Receive & Hangup) buttons at the same time my phone reset automatically. Does anyone found this problem?
Thank
Re: Problem when press Receive Phone and Hang up Phone toget
hotnan said:
I just wonder why when I press both (Receive & Hangup) buttons at the same time my phone reset automatically. Does anyone found this problem?
Thank
Click to expand...
Click to collapse
I have one question: Why did you press them together? :?:
Becuase I notice that when I put my phone in my plant pocket when I pull it back and press [power button] my phone reset. So I try simulated what happen to my phone when it in my pocket. cause of action as subject
Thank.
recieve button, like the call button, the green one? cuz i did that with the hangup button nothing happened other then open the phone app.

Can't get my K-Jam to hard reset

Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)

help with the "talk" / "call" / "phone" button

hello everyone, i have the cingular 8525 and i noticed that when i press the green button with the phone logo to open the "phone" application (or to makes calls), it does not work...i dont think its the button itself but an issue with the software. i figured this out because I went to settings and and tried the "buttons" application to try to remap the button to the "phone" application however, i can only (re)configure button 1 (which is messaging) button 2 (which is internet explorer) button 3 (which is comm manager) and button 4 (which is the camera).....and there are no more buttons to reconfigure after that....i know i am suppose to have button 5 and 6 but they dont show anymore... any help would be deeply appreciated...thank you
I have the same prob, but my keyboard have a Italian setting. I think that this prob it's very annoying! Anyone could help us?
ive had that problem
Ive had the same problem, and my front buttons doesnt work, and it was hardware problem, send it to warranty.
hope usefull.
I have HTC TyTN and the same problem with call(green Button) it doesnt work at all.
When I want to enter the phone I press video call button , but could not make cals with green talk button , I should use talk button on screen.
Is there any help with this prob ?
Just fixed that problem.
The button didnt respond to normal presure , pushed it hard and it worked.
Pushed it hard 50 times or more and now it is working.
Probably the button needed some action to start working.
So what happened to "i know i am suppose to have button 5 and 6 but they dont show anymore" ? Oh, you just realized there was NEVER an option to change those buttons ? Ah, okay.

shortcut key not functioning

this morning i upgraded microsoft my phone software. it asked me to restart, but since i'm in a middle of something, i choose to restart later.
when i wanted to restart my phone (by pressing the red call button). the phone just won't go off. i also found that the message, camera, inner circle buttons to be not functioning while we're in the home screen.
but then all the shortcut buttons accept power off button, did work while i'm in onenote. anybody had same experience or way out?
Please kindly share...
case closed
yesterday, after receiving phone call. all the shortcut buttons back to life.
Have no idea on what's happening...

TD2 - on/off, camera and keylock not working

Hi All,
I have a Touch Diamond 2 with WM6.5 and have a problem.
A few weeks ago the camera stopped working (unable to get the camera to load via any shortcut button, or by the photo album or by the camera app).
At the same time the power off doesn't work - the sleep button works but when you depress the button for the usual 2 seconds to get the 'do you want to power off Yes/No' it never occurs no matter how long I press
In addition I used to have the home button to keylock the phone after depressing it for 2 seconds, that no longer works too.
1 more thing, when txt'ing and entering the recipient's name, usually when you type in 'St' it predicts 'Steven' from you contact list. It no longer does this either, I have to manually go to the contact list to add a recipient.
All three happened at the same time.
Any suggestions without doing a hard reset? I've tried a soft reset (pressing the button near the stylus slot) with no luck. Also tried disconnecting the battery and reloading.
Thanks

Categories

Resources