Related
Hi all...
I was wondering if there was a hack or something available to make the jogwheel perform a smooth scroll in PIE instead of scrolling through the links?
I did a search but didn't find anything.
TIA!
in wiki, you can find the registry hack that will allow up/down and scroll wheel to page down rather than hyperlink jumps.
the hack only refers to up down controls, but it works the same on the jog wheel.
there are heaps of other wonderful hacks there also if you havent already been there.
Look under WIKI, down the bottom WM5 Registry hacks.
Yes that's absolutely right - use the Wiki
If you have Tweaks2k2 this has a setting to do the change for you.
Note that changing to smooth scrolling changes the TAB behaviour when writing SMS e-mails and you can no longer tab from the "To" box to the body of the message.
Smooth scrolling avoids the link to link scrolling but will scroll a page at a time. I have not found anything that scrolls one line at a time (though very strangely it randomly does scroll a line at a time!!)
Mike
mikechannon said:
Yes that's absolutely right - use the Wiki
If you have Tweaks2k2 this has a setting to do the change for you.
Note that changing to smooth scrolling changes the TAB behaviour when writing SMS e-mails and you can no longer tab from the "To" box to the body of the message.
Smooth scrolling avoids the link to link scrolling but will scroll a page at a time. I have not found anything that scrolls one line at a time (though very strangely it randomly does scroll a line at a time!!)
Mike
Click to expand...
Click to collapse
Aha, so that's why the tab function does not work anymore in my sms app! thanks for this info.
Cool, thanks for the info!
I'm not worried about the To field in SMS messages. I don't normally use the jogwheel to change between To and the message body.
It's too bad that there isn't built-in functionality for the wheel like in Windows for the mousewheel, choosing to scroll 1 line, 6 lines, or a page at a time.
What is the Wiki?
sportsmad said:
What is the Wiki?
Click to expand...
Click to collapse
The Wiki is the fount of all knowledge. Well not quite but - the Wiki is a site within XDA-Developers that contains information on those things about the Hermes (TyTn) that are largely sorted out. It has general info, specific info, technical info, solutions to problems and of course the stuff for those true developers - the ROM guru stuff as well as info on flashing, upgrading etc. Here is the link - save it but if you loose it there is a sticky post at the top of the Hermes 1st page of Hermes posts that takes you to it!
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Mike
Hi, I use pieplus+, you can adjust the jogwheel scroll settings to what says line, I think its similar to the scroll in tweaks2k2..its a lot better that the default, that's all I know, but the main thing I did notice is that the tab to field with the jogwhee stil works on sms, email..etc.
Just throwin that out there, I rarely use the jogwheel on sms, mails myself.
Yeah pieplus worked in that department for me as well!
For some reason, when I open an SMS in my Text messages inbox, it starts at the bottom of the page, so i have to scroll up to the top to read it!
Im sure it didnt do this when I got the phone, but now it does.
Any ideas?
Try changing the way the message is sorted. Just tap a the small triangle below the close (X) button. Hopefully this solves your problem.
Sorry, I didnt make myself clear.
Its not the message list, its the message itself.
When I open an SMS, these can only be 160 chars remember, the screen is scrolled down a page showing blank nothing. I have to grab the scrollbar at the right and drag it to the top of the sms where the actual message and header are!
No sms would ever fill a single screen, let alone go into a second so I have no idea what is going on.
Pyrofer said:
Sorry, I didnt make myself clear.
Its not the message list, its the message itself.
When I open an SMS, these can only be 160 chars remember, the screen is scrolled down a page showing blank nothing. I have to grab the scrollbar at the right and drag it to the top of the sms where the actual message and header are!
No sms would ever fill a single screen, let alone go into a second so I have no idea what is going on.
Click to expand...
Click to collapse
That happens with the keyboard attached or not?
This is happening to me as well - Anyone know what the fix is?
Thaks
Barney
I never found it!
Just upgraded to wm6 and it opens them scrolled down a little bit, just enough to hide the "received on blah"message, but not the caller name/number
Makes me think maybe its to do with message headers? Fiddle with the header display options. Good luck.
May i know what your wm6 build number?..
we had this before in out wizard when we are still using the older build number wm6 ones..
I had that prob in the shipped Tmob rom on Ameo, Its not happening on mew wm6
New os is 5.2.1238 (Build 17745.0.2.3) though.
But as I say, it starts moved down a tiny bit only now, so i can see the message.
On TMob wm5 rom it started at the bottom of a long page, so EVERY time i opened a sms I had to scroll back up to read it, very annoying.
This bug occurs in wm6 build number 5.2.1238 downwards..
at 5.2.1413 the bug isnt exist anymore..
That happens when you set smooth scrolling/dpad scrolling via reg hack or change scrolling via htc tweaks, etc
Anyway to undo/fix it?
Pyrofer said:
Anyway to undo/fix it?
Click to expand...
Click to collapse
Change the registry back or uncheck the smooth scrolling box in the tweak app you are using..
or
see reg setting below
0 = Smooth Scrolling with joystick (but sms msg's will start at the bottom)
1 = Default scrolling by link vs joystick
Navigate without stylus
The default behaviour for your device's four-way direction button in Pocket Internet Explorer (PIE) is to jump between hyperlinks/form fields on a web page. To change this behaviour so that the button scrolls the page left, right, up and down, use the following tweak:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 0 (DWORD decimal)And to re-enable hyperlink/form field navigation:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1 (DWORD decimal)You may still jump between links using Tab and Shift-Tab using the built-in hardware keyboard.
See the Hermes and/or Universal wiki for many registry tweaks, etc
That worked for me
Thanks
Barney
My beloved o2 mini was having a few 'issues' - dropping calls, bad battery life, periods of no network - it was time for an upgrade.
So I bought a Telstra branded touch dual off ebay from a company called 'viper technologies'. I discovered why it was called that when the parcel arrived with 'Mike Metcalfe' in the 'from' section - Mike Metcalfe was Tom Skerritt's *real* name as the head instructor of 'Top Gun', otherwise known as 'Viper'.
I'd done some prereading at xda developers and discovered the Telstra version is the 850, which is the NEON and not the NIKI. On the upside the 850 apparently has a larger battery, the ability to work on Telstra NextG, an FM radio, and the power button is in a different place (the same as the o2 mini fortuitously)On the downside it has the telescopic stylus, which is fine because I tend not to use it much. I found that the fact that it was in the bottom right corner took more getting used to than the fact that it was telescopic.
Anyways. First, that telstra branding had to go. I found the right spl uploader at http://forum.xda-developers.com/showthread.php?t=377260>, and installed version 1.06.841.4 ROM on it.
The only issues with the flashing was that I missed a crucial step of unplugging and replugging the cable, as per the instructions (in capital letters even) in the aforementioned thread.
I made my own little startup splash screen to replace the windows mobile one and stuck it in the windows directory by making a 240 x 320 pixel jpg in photoshop and naming it 'welcomehead.96.png'.
Before that, of course I had to discover that ActiveSync 4.5 is the latest version for XP, and will always be, because Vista now has some other sort of thing to transfer to mobiles. ActiveSync 4.5 has behaved itself quite well for me, much better than I remember 3.7 ever doing with the o2.
I decided to make a partnership without syncing any data at first, because I knew I'd be connecting and disconnecting and didn't want to always wait for it to sync hundreds of files before it let me do anything. At this juncture the little rubber USB port cover on the bottom first began to annoy me, but more on that later.
OK, it was time to try and make this little fella do everything the o2 could - and more. Familiarising oneself with the new WM6 was fun - the o2 ran 2003 and while they haven't changed much, there were a few things that needed getting used to.
HTC HOME VS CLAUNCHER
My thinking usually centres around getting things done efficiently. And whilst it looked so cool, I came to the realisation that HTC home had to go. The clock? Too much screen real estate (and I have a watch anyway). The message/call/appointment notifiers? I wanted to see the actual appointments written there. The launcher? Only NINE programs? Please! The weather? Firstly I didn't seem to be able to get it for Australia, and secondly... I actually realised that I don't really care about the weather that much! Ringtones? Don't use 'em. Right.
So I stumbled upon a program called clauncher, which it turns out is incredibly cool and efficient. You can just load it up, select it as a plugin and then click and hold on the empty space to access a huge variety of settings. It comes with 8 tabs for categories, like Main, Tools, Comm, Games etc etc. One of the excellent things about clauncher is that you can just import your start menu folder into an empty category and then just cut them out into the right ones. It's easy to move them with a multiple selection function and 'move up' and 'move down' buttons.
I found that keeping the icons at their native 32 pixel size looked nicest, and it's also about the right size for a thumb. I gave them a 3 pixel space between them but then I put a large right margin of 12 pixels, because clauncher has a cool feature which flips icon screens when you touch the blank part. You can also set the total height. So the sizing above gave me five icons in two rows, with a blank portion on the right to thumb to the next page. I discovered also that you can get more screen space (and a neater look) by hiding the tabs altogether.
Earlier on I'd discovered a terrible problem with clauncher - The pop down keypad would only type the first letter or number in the boxes! So I had named the second tab '2' and moved on. The lack of keyboard became an issue when I wanted to add manual shortcuts etc. Luckily I stumbled upon the fix for it. Instead of press and hold for the settings, if you access them via the 'today items' control panel, it gives you the softkey bar at the bottom, and hence your keyboard options back again.
Currently I've got four screens - my most frequently used (vaguely) apps, less frequently used apps, communications stuff and then games.
All I need to find out now is how to anchor it to the bottom part of the screen.
I noticed that WM6 no longer puts your messages on the today screen - 'no unread emails' or whatever. But a shortcut to messaging was an easy fix with clauncher.
HARDWARE KEYS/LONGPRESSENDKEY/SLIDEACTION
The lack of hardware keys was something I didn't realise I'd miss so much. The o2 had phone buttons, volume slider, camera button, the normal nav buttons PLUS appointment, contacts, and voice recorder buttons. I used to run buttonmax on my o2 which let me map press, double press and long press to each of the extra buttons.
I thought I'd found a solution in AEbuttonplus - it was free, it let me map buttons - but the only buttons I could really map were the phone ones.
So I mapped a double click on the green button to close a window (when I'm thumbing around it's actually easier to get to the bottom part of the screen, particularly when using the sliding keyboard). It was working great - until I got a phone call. The green button seems to change purpose depending on what's going on. I had mapped its usual use to 'phone', but that didn't seem to cover 'answer call' or even 'send call' - I had to use the on-screen softkeys. I'd installed 'slide action' software which had been working great, but I realised it must simulate a 'press green button' or something, because it stopped working for phone functions too. So AEbuttonplus had to go.
The small consolation came with the 'longpressendkey' setting somebody thoughtfully put in the ROM - I can at least set my phone to vibrate with one key, which I could never do easily on the o2. I'd love to see 'longpressendkey' set up to allow any customisable link, and while they're at it, make BOTH the green and red keys mappable for single, double and triple press as well as long press. That would give six extra hardware key options and make up for the lack of them elsewhere. Anyways.
ACTIVESYNC/MACROREADER/CEREGEDITOR
Dang it, I stuffed around for a LONG time trying to solve this. On my o2 I had a hardware macro (double press contacts key) which would start activesync, and then another activesync specific hardware macro (hold contacts key) to connect bluetooth and start synchronising. And then to disconnect, I was running the Magic Button task manager and a tap on the X would disconnect and close activesync.
How to do it? I didn't have hardware keys, I didn't have macros, OR didn't I? I ended up discovering a little piece of software here:
http://vitotechnology.com/en/products/download.php?ID=1645&BID=23
in what seemed to be the VITO 'boneyard' where they keep all the seconds and dodgy stuff - I couldn't find a link to it on the main site. It was called 'MacroRecorder' and it comes with no manual or other information. But it works if you just want to record a tap-based macro. Next problem then - how to make a tap for starting Activesync always be in the same place?
You gotta love those registry hacks. I found a program called CERegEditor which lets you connect up the phone, and then edit the registry on your PC. Sure beats keying in all the weird info on the tiny screen using the tiny buttons.
I remapped the bottom left softkey to ActiveSync using the Key 112 registry entry, and now I had my solution to making a tap-based macro. MacroRecorder isn't that tricky actually - you just start the exe, click the okay screen, do your thang, and then press the little red square which has appeared in the middle of the screen to finish. It asks for a name and then creates a file in the same folder as the exe, which you can put wherever. I created an entry for it in clauncher, gave it the activesync icon (Windows\repllog.exe) and now I can start activesync and connect via bluetooth with one press!
While I was there in the registry I did a few other tweaks like making the scroll bars 15 pixels wide (the widest you can make them whilst keeping the 'settings' screen three icons wide) and making the date one line instead of two. There's a list of registry tweaks here:
http://www.ppcsg.com/index.php?showtopic=50029&st=0
Getting activesync to close and disconnect in one action was a bit trickier. None of the task managers I tried would close activesync down altogether, like magic button used to do on my o2. I found some trial software which advertised the ability to 'close activesync on disconnect', which it DID... but the only problem was that it wouldn't OPEN it again when you reconnected.
Given that WM6 now gives you the option of the OK button actually closing things rather than minimising, Magic button sadly had no use anymore. Goodbye, trusty software.
So it seems I've gained a step in making Activesync connection a one-click process... but I've lost my one-click disconnection. Oh well. There's some software which people talk about which was supposed to be able to automatically schedule bluetooth connections, but it sadly seems to have disappeared.
CONTINUED IN PART 2
PART 2
MS READER
I had been using MS reader for my ebooks and it worked fine on my o2, but for some reason it seemed to be painfully slow on the dual. I ended up converting my .lit files using 'convertLit' and downloading Mobipocket to read them. It's not quite as pretty as MS reader, but it's definitely faster to load, and it takes you to your last read book straight away instead of having to go through all the intro screens. Second shortcut in clauncher, then!
TOUCHFLO
Well that cubey thing is super cool - so I spent considerable time trying to get it to have the elusive fourth face. BUT then I asked myself, 'what does touchflo do that I can't do with one press in clauncher?'
About this time I had to hard reset and rebuild everything because I'd added in some irrepairable registry stuff and the cube was whacked out completely.
I left it as three sides, then. Now - it's not immediately obvious, but the 'quicktasks' screen that comes up when you open the slider is actually part of the Touchflo 'family' and it's settings are in the same place in the registry.
So it was relatively easy to replace the 'Email' on the third side of the cube with 'new email' from the APlauncher screen, 'SMS' with 'new SMS', 'Notes' with 'new note' and 'calendar' with 'new appointment'. That way the icons matched up just great.
The problem is that now that I've figured out the shortcuts, it's probably just as easy to put an icon in clauncher for them! So rather than 1. turn on, 2. swipe up, 3. swipe across, 4. press icon; you could eliminate the swipes...
I'm finding too, that new things involving contacts (SMS, MMS, email, phone calls) are best handled by sliding out the keypad, typing the first few letters, click down to them with the navigation keys and press the centre key. Then you get a screen with options to call any of their numbers, text them or email them.
If you go the 'new message' route, you have to access the contacts list in a far more cumbersome manner - smaller type entries which are harder to click with your thumbnail and that you either have to scroll to or type an exact match for it.
I've also found the following when using the touchflo features:
* to get the touch cube every time, start at the htc logo and sweep up with the thumbnail.
* you don't have to be 'twitchy' with the photo gestures. A slower and deliberate circle or half circle tends to make it do what you're asking a lot better - more nail, less finger for the photo stuff too.
* for scrolling, press quite firmly, and use a lot of finger surface area. Too much nail tends to make it click. I imagine I'm smudging stuff off my finger and that seems to work well. For long scrolls do a finger 'flick'.
THAT RUBBER COVER
After only a few days of activesyncing, I noticed the rubber cover on the USB port was starting to not close flush anymore. A bit of research turned up that it was an extremely common problem. So I bit the bullet and cut it off, but I cut it in a way that I could put it back on if I wanted, by slitting through one of the sections that anchors around the little pin, leaving the rubber in a hook shape to hold it in when needed. I tried putting it in the freezer for a time, but that seemed to have no effect, and I was already sick of pulling it off everytime I plugged it in to charge or whatever. So I trimmed that baby off, right next to the middle section, so that it was still held in at two points, but so that the USB port was now exposed. I then took the remaining bit and trimmed it right close to its anchor thing, and slotted it back as well. So now the USB port is exposed but none of the ugly holes which the rubber thing slotted into are. I shouldn't have to worry about wear (because I'm not taking it off all the time) or expansion bulging (because it has one free edge), and because of the way the curves sit it looks like a nicely recessed USB port. I'm not certain the tiny little piece will stay put, but if it falls off (and I can still find it) I could easily put a spot of glue on it - it doesn't look too bad without that little bit anyway. If I did it again I'd probably leave a little bit more rubber on the side closest to the centre, so that the USB port looks better centred in the hole. (see attached pic)
CLOSING THE CAMERA/ALBUM
I found that pressing the X on the camera only minimised it. Fortunately there's a registry tweak called ok_minimize which you can change to make it actually close the app.
IE
Internet explorer is a dog for scrolling big pages. Replace your webview.dll file and it's much better.
.lnk FOR 'PROGRAMS' FOLDER
If you make an .lnk to the programs folder normally, it opens in a file explorer window - not cool. The solution is to make it point to the HTC app 'folderview.exe' and it works a treat. 'Settings' is not so simple though. You can map to individual control panels but not the main one with them all in there. A bit of a weird one.
Anyway, all in all I can't wait to put my dual to work now that it's been primed and readied - my wishlist at the moment would be:
* map double/triple/hold functions to the phone keys
* get slideclose to send a 'close current app' command rather than just go back to today screen
* align clauncher to the bottom of today screen (easier to thumb, and looks neater)
* figure out an .lnk file for the 'settings' control panel (this seems surprisingly difficult - in fact I installed some software that remapped the start menu and I couldn't get into 'settings' to remove it!)
* find a taskmanager or utility that actually kills activesync while it's connected
* to get faster at typing with the dang half-qwerty keyboard!
* I reckon a taskswitcher that used the touchflo 'across' gesture to scroll between open apps would be really cool.
There you have it - hope some or all of that is actually helpful! Thanks to all you guys out there cooking ROMs, writing software and thinking outside the box.
Cheers
jbng
jesus christ are you competing for the longest post of the year award??
holy crap !! i read it from the very beginning and never read such a post before ..... well done dude !! and keep up posting ;-)
re : * find a taskmanager or utility that actually kills activesync while it's connected
i searched such a tool a long time ... never got something which lets me charge niki without syncing on the pc.
workaround: i placed the network connection of my niki on my xp taskbar . when i want to sync then i enable network connection - if not, disable . not the best solution , i know , however - it works and since then i got used to it.
cheers
I take my hat off for these post's! Great job man!
nice post, even better to know there are people out there that search for answers before posting question after question
jbngar said:
I found that pressing the X on the camera only minimised it. Fortunately there's a registry tweak called ok_minimize which you can change to make it actually close the app.
Click to expand...
Click to collapse
did you try changing the setting in settings -> task manager -> button -> to end program by tapping x, works ok for me
WEEK 2
Week 2 of touch dual has been a whole lot of fun. I'm still looking for an absolute 'killer' of an app that will make anyone and everyone go 'oooh, aaaaah - that's SO much better than your o2 mini could ever do'... but I'm yet to come across it. The most impressive thing is the voice activation, but whenever I show someone and tell it to 'play track twenty' it always seems to try and 'ring jack henty' or something like that.
AEBUTTON PLUS
I thought I'd try a trial full version of AEButton plus. I began by mapping a double centre-nav press for 'ok/close' and several other cool things to the left and right nav buttons. Worked great, for a time, until I tried typing. It turns out the 'enter' key on the slider does exactly the same thing as the centre press, and so every time I'd make a new paragraph I'd close the window! Not to mention all the weird and wonderful things that would happen when I went to correct a mistake. Click back... click back... click and hold... and the screen is rotating and all sorts of applications are launching!
So I realised the reason that most button mappers don't let you map the nav keys.
The camera button had issues too - even though it was mapped to let a single press do the default action, it wouldn't take a photo. No good.
The red button wouldn't work for some reason either, I can't remember why, but all I know is that I was left with my button mappings on the green button only:
single press = default action, double press = ok, triple press = switch application, hold = close application.
3G, GSM, INTERNET and MMS
The big news this week was the arrival of my 3G sim card. Both of them. I'd ordered one from Optus about a week and a half ago with the promise of '2-3 days'. It didn't come so I rang again and was told 'there's no record of you being sent one, we'll send you another'. And they both arrived on the same day - one at work and one at home.
Then I rang at lunchtime thursday to activate it, and then spent most of the rest of the day restarting the phone to see if it had provisioned in the '15 minute to four hour' window they gave me. I ended up slipping the card into an old Nokia 3200 when I got sick of waiting for the dual to boot up and hang when it was looking for the network. The Nokia flashed up a much more informative 'sim card not registered' message, which it continued to flash up until I gave up late on Thursday night. But in the morning, wonder of wonders, it was working! My family breathed a sigh of relief because they didn't have to listen to the dodgy Nokia startup tune any more.
The first thing I did was try the internet and it performed very respectably. But MMS messages refused to work.
I made a couple of calls to Optus to get the settings and was told 'you have to enter them manually'. So I faffed around with that for ages. The problem seemed to be that MMS would work if 'mms' was the default setting, but then internet wouldn't work. If I changed the default to 'internet', then MMS stopped working. Rah!
Then I discovered in the connections settings an icon called 'network wizard'. I thought it was for WiFi or something. But after clicking it, selecting the provider and restarting, everything worked just fine! Thanks for the heads up, tech support guys! I'll be sending them an email shortly.
3G tends to use more battery, so I tried a tool called bandswitcher to easily change between GSM and 3G, but it didn't help my config problems. And I thought that if I lock it to GSM, if someone tries to video call me it won't work; and if I lock it to 3G, if I go out of coverage it won't switch over. So 'Auto' it was.
BLUETOOTH RANGE
The bluetooth range seems to be a bit paltry on the dual. I tried switching off 'secure connection' and it was marginally better, but I couldn't connect from the next room like I could with my o2. Once the connection is established it seems to be better, but I have to say activesync via bluetooth has been flakier than I'd like - with lots of dropouts etc.
KEYSWOP
Try as I might, the shortcut path '\windows\poutlook.exe calendar -new' that was working for 'new appointment' on the touchflo cube would not map to the right softkey using the registry. So I found a free utility called 'keyswop' which makes .lnk files and helps you to map them to the softkeys. So everything in the software side of the touchflo cube is now in clauncher, a softkey or something else:
* New SMS/MMS/email - open keyboard, press first few letters of name, press 'send message'
* New appointment - press right softkey, enter details
* New note - open notes from clauncher, press left softkey
* IE/comm manager - clauncher icons
CLAUNCHER
Speaking of Clauncher, since last week I now have 15 icons (3 rows of 5) and less screens. It's very seldom that my appointments push it off the bottom of the screen, and if they do it's easily scrollable.
Further to my last investigations about needing to access the options via the today settings control panel to get the keyboard, I've found that you ALSO have to use the bog standard WM6 'keyboard' option - the other HTC keyboards will only give numbers. This seems to be the case in some other applications like Visnotes too. Visnotes is an awesome free application for storing encrypted numbers like bank accounts etc which uses an innovative 'password' - you press three times on a picture in preset places.
TYPING and XT9
I tried out an application called 'touchpal' which advertised itself as 'typing faster than a hardware keyboard'. But I think the dual's 2.6" screen is just a bit small for it to be effective. I've decided to stick with the half-qwerty keyboard and just keep practicing - and it seems to be paying off. My goal is to get to the stage where I can type without looking at the keys with either two hands or one.
XT9 is actually incredibly intelligent software. It uses complex algorithms based on what keys were near the one you actually typed, and combines them with its dictionaries to guess what you were trying to type. And it does very, very well. Anything that can guess the word 'friend' from the keystrokes 'ddeuabd' or 'thorough' from 'ggoedoujgg' is pretty darn clever.
The issue I had was that the default keyboard kept going back to 'ABC' aka multitap. This was fixed by switching the registry key CarrierDefaultTextMode as outlined here:
http://www.ppcsg.com/index.php?showtopic=97265
A couple of other xt9 tips:
* I found I had to use thumbnails (not thumbs) for the keys to avoid double pressing etc.
* For two handed entry, the 'Alt' key is quickest to access numbers and symbols on the top of the keys. For one handed entry, pressing and holding does the same thing.
* every so often XT9 uses a strange default word. My issues were 'boy' for 'not', and 'st' for 'at'. You can fix this by typing and selecting the word you want three times in a row. This seems to 'teach' it and sets it as the first word it chooses each time.
* the first row of symbols can be quickly accessed by holding down * and the relevant number (e.g. *7 will give you a smiley).
I *wish* there was some way to change the symbol matrix. The first three in the first row are already on hardware keys (.,?!) and the next ones are smileys. I would like to at least put a hyphen in the top row so I could access it without leaving the hardware keyboard. I've found the easiest way to enter symbols is to scroll to the row and use their numbers.
ACB TASKMAN
This software tells you which actual PROCESSES you are running. Quite useful. I used it to close down AEButtonPlus when it was mucking up.
I think that's about it for now - the main outstanding issues are still a shortcut to the settings control panel, and a way to align clauncher to the bottom of the today screen.
Otherwise, enjoy!
PS. A fun app I found is called 'guesser' - it basically gives you random numbers for all sorts of things like heads/tails, yes/no, agree/disagree, A/B/C/D, alphabet, 1-100 etc. We were with some friends the other night and everyone picked a number between 1 and 100 and the winner was the first one to have guesser pick their number. Fun in a bizarre kind of way...
Blimey, Claunch is nice, but I swapped to Ultimate Launch, just for the Today plugins within Tabs and animations, plus lots of Icons for it. If you do swap, remove cLaunch first as it buggered up my UL when I removed it afterwards.
Hey
I'm trying to get the HP iPaq 614c in a usable state....what I'm finding is that the Smart-Touch scroll wheel is great, nice and quick and you can be productive.
But, because it is only one way (up <-> down), and because it usually functions as the equivalent of a "tab" key press (if on a PC) you can't use it for moving around in a text block.
You have to use the up down left right method by hovering over 5, then moving your thumb in the appropriate direction...however, the repeat rate on this is slow slow slow......
Its enough to not make me keep the 614c because it means editing SMSs or emails or even just random text fields like URLs is painful, particularly when you make a mistake.
Does anyone know any registry fields to change this?
I've tried the accessible settings in Settings > Buttons > Up/Down Control but they have no effect.
Thanks!
Si
yes i would be interested in this too.
I've searched the registry but couldn't fnd anything applicable. I found one key which was reported in another forum, but it had no effect.
WAY NOT TAP (WITH FINGER) ON THE AREA AND THEN MOVE L/R
I THINK YOU NEED TO HAVE "SLOW" MOVMENT FOR SOME APPS/FILES
well that is why I do, like you say. I guess slow movement may be useful for some things.
When you're in the middle of a text message or email though, it can take days to scroll through a message.
Its also very hard to pinpoint the cursor to the right area with out using the stylus (i.e. with your finger nail).....
...part of the beauty of the 614c for me is the phone keypad which allows T9 input (T9 input being super fast compared to any qwerty input with two fingers), but when you can't edit the message very easily it becomes annoying.
Im sorry to say that I don’t know/suffer from your prob
not that I do want problems, but the thing is that all text is within the bounds of the screen (for me on long doc/mail....) so the only need for fast thing is up down
maybe you have a different setting that lets you see "out of the screen" ~ the need for fast L/R scrolling
as for ie tx9 I don’t use this method so ….. I disabled the default settings of having it on first thing
for ie address I use pie-plus app ,it has within it's settings option for quick words/address and finger scrolling or open more then one tab etc.
but you asked so I will give you the solution
please backup your device
open a reg edit like this free one
http://www.phm.lu/products/PocketPC/RegEdit/
then go to HKLM/software/tegic/et9/ime
tap on D-WORD "carrierDefaultTextMode"
set value from "0" to "1"
enjoy
for l/r scrolling, what i'm talking about is when you're editing a text message or an email, they can get quite long. so say you're editing a message, then you realise you need to add a word at the start or edit a word in the middle, it takes ages to scroll to the middle or the beginning using the l/r scrolling on the smart touch wheel....and when i say ages, i mean ages, at least compared to how quickly it works on the smartphones with a hard nav joystick/wheel.
it has nothing to do with whether you can see the text on the screen. its to do with moving the caret/cursor/pointer around within the text.
thanks for that registry entry...i did try it, but it made no difference. IE still uses abc method.
i may look at that pie-plus ting though, looks like it may help.
sikittle said:
forthanks for that registry entry...i did try it, but it made no difference. IE still uses abc method.
i may look at that pie-plus ting though, looks like it may help.
Click to expand...
Click to collapse
works for me
did you save the reg by "exit " turn off the device for 10 sec then SR ?
any way i will also try to look into the scroll....
it changes the default method for applications like Internet Explorer for you? not just SMS composing?
I'll try it again...
hey yeah
that did work, thanks!! (making the default mode actually work as default in all circumstances)
i just typed it wrong.
told you so i will also look into the wheel thing im now into helping with this http://forum.xda-developers.com/showthread.php?t=403736
more option etc. mainly 4 ipaq 600
hmmmm.....do you know how to make that keyboard fix work even when you install a 3rd party keyboard.
I was trying to install a finger friendly keyboard for the times when you have to type in passwords or other such delicates, but if i do that after having made that modification it loses it as the default.
I am trying to find a way to mess with
HKLM/Software/HTC/SmartTouch/ key in registry, which is supposed to control the zoom bar.
I did some research in several threads in this forum, but all I found was some info (mainly on TD1 threads) on how to make the zoom bar (or scroll wheel in TD1) produce scrolling in apps.
However, what I am interesting in, is ZOOMING within any kind of application. Any idea on how to achieve this? The aforementioned key contains values such as ClassName (which is the app's class, something that is not easy to figure out; any tool on finding out an app's class would be appreciated), WheelCount (which probably is sensitivity), and Mode (which I have no idea what it is).
Anyone could help with this?
I could imagine a few nice things to do with the Zoombar. As I'm missing the arrow keys, it would be great to define a few gestures to use up / down / left / right keys with the zoombar.
e.g.
slide to the right -> right key
slide to the left -> left key
tap on '+' -> up key
tap on '-' -> down key
jcan said:
I am trying to find a way to mess with
HKLM/Software/HTC/SmartTouch/ key in registry, which is supposed to control the zoom bar.
I did some research in several threads in this forum, but all I found was some info (mainly on TD1 threads) on how to make the zoom bar (or scroll wheel in TD1) produce scrolling in apps.
However, what I am interesting in, is ZOOMING within any kind of application. Any idea on how to achieve this? The aforementioned key contains values such as ClassName (which is the app's class, something that is not easy to figure out; any tool on finding out an app's class would be appreciated), WheelCount (which probably is sensitivity), and Mode (which I have no idea what it is).
Anyone could help with this?
Click to expand...
Click to collapse
Hi jcan,
Did you manage to find ways to resolve your question? Kindly share with me please!
Try here:
http://forum.xda-developers.com/showthread.php?t=512614&page=5
Thanks for the link mattan, but I had already tried the Advanced Config solution... It is true that you can add Smartouch capability in active apps from there, but the problem is that I tried some (e.g. GSFinder+), and it worked as a scroll device.
What I am trying to find is a way to make the zoom bar work universally as its name says, i.e. zoom. It would be very nice to be able to zoom in anywhere in the device, like having a magnifying glass. Unfortunately, I haven't found anything yet but I know that the solution is hidden somewhere in the Smartouch reg key... Let's hope some fellow xda member will enlighten us!
and it worked as a scroll device.
Click to expand...
Click to collapse
Actually it's not, it's work like hardware Up/down key. In some case you can redefine action on it (In program settings), for example CorePlayer, or some games.
I think biotouch must be modified for this
jcan said:
Thanks for the link mattan, but I had already tried the Advanced Config solution... It is true that you can add Smartouch capability in active apps from there, but the problem is that I tried some (e.g. GSFinder+), and it worked as a scroll device.
What I am trying to find is a way to make the zoom bar work universally as its name says, i.e. zoom. It would be very nice to be able to zoom in anywhere in the device, like having a magnifying glass. Unfortunately, I haven't found anything yet but I know that the solution is hidden somewhere in the Smartouch reg key... Let's hope some fellow xda member will enlighten us!
Click to expand...
Click to collapse
What you would need to do it actually write an application that zooms the screen in hardware (similar to ctrl + mouse wheel zooming in Mac OSX) and control it with the zoom bar in applications that don't work with the zoom bar at present. I haven't actually used GSFinder+ but if doesn't have some sort of zoom level available to it through a menu function or on screen button then there is no way the zoombar will magically give it (or any other non-zooming program) one.
OK, I get it then... So, if an application does not support zooming, then the zoombar can only be used as a scroll device (or up-down key)...
I guess we will have to settle with that type of use then, until a screen zoom application comes up.
jcan said:
OK, I get it then... So, if an application does not support zooming, then the zoombar can only be used as a scroll device (or up-down key)...
I guess we will have to settle with that type of use then, until a screen zoom application comes up.
Click to expand...
Click to collapse
this is what u want :
criszz said:
this is what u want :
Click to expand...
Click to collapse
What does this cab exactly do, mate?
Read and download here:
http://forum.xda-developers.com/showthread.php?t=406206