Database Users

DOPOD 815 Pro struck on HTC BOOT screen

hi my new dopod has a problems
after soft reset it struck on HTC BOOT Screen
i hard reset it using 1]camera button 2]connection 3]reset
and press green key
but stiil struck on HTC screen
please i want om update
thanks

Hi, u might try this
step 1
camera + connection + reset
step 2
hold camera + connection, just release reset only
step 3
still hold camera + connection + green button
should be ok, there is mistake on the manual, the way u do should be still performing soft reset, I think

ok i tried that ant it says format complete but still stuck on HTC
tried rom update but error 260
please help

what is the send button ?
A black screen tells me "press send button to format".
but i don't know what the send button is...
help !

send buttom is the "green phone" buttom
in other word, the buttom you make call...

Pls Help for bootloader of dopod c800 not worked aft trying install WM 6

I have dopod c 800 which is broke wjile install the WM 6 ,now the condition just the startup screen with :
- dopod logo
- ipl 1.09.001
- spl 1.09.001
-gsm 02.69.90
i'm trying to get into bootloader by pressing camera and stylus or camera+comm manager + Stylus , but the screen was goin back to the logo of dopod again.see the figure
i think after get into bootloader i can install the original rom first then install again the wm 6
some body help please

Try holding the Camera Button after Reset, until Bootloader Screen appears, this must work out !

You have to hold both buttons (camera and commanager) until the bottscreen appears. only teh softreset button is pushed once.
DOn´t left the other bottons before bootscreen appears.
Good luck

Thanks
papamopps said:
You have to hold both buttons (camera and commanager) until the bottscreen appears. only teh softreset button is pushed once.
DOn´t left the other bottons before bootscreen appears.
Good luck
Click to expand...
Click to collapse
Thanks it works but pls find the way to make the gsm work after ugrading to WM 6 , nice system ..but sad always searching signal for the handphone.
Thank you

xPhoneII upgrade to WM5 impossible!

Hi, I have a xPhoneII with (in bl mode):
TYPHOON IPL 1.00
TYPHOON SPL 2.05.0123
TYPHOON
Why I cannot upgrade it to wm5?
I have tried to use the instruction from ronswens, but there is an error, infect in step 4/5 I cannot see any "Need an UI (0)?" !!
Can you help me?
Daniele
4. Press Camera button and holding it insert USB connector (or holding Camera button press Power button for 1-2 seconds)
5. When "Need an UI (0)?" appears on the screen press [0] immediately.
6. You will see tricolor screen, in the blue zone there will be "Typhoon IU" message, if you see "Typhoon XIP" you were late to press [0], start from beginning.

Please someone help me problem with an wizard

Hello.I have a problem with my htc wiz.I've restored a backup with PHM registry editor and now my screen is stucked on IPL/SPL screen.IPL : 3.08 SPL : 3.08.I have CR86_Touch_HD_1.2_Ezinput.Is some key combination to enter bootloader?
--------------------------
Problem solved
Hold Poweron+Record together, press and release soft reset buton (briefly), but keep holding Poweron+Record, then you'll the test showing up.

Qtek PH10B

My Qtek PH10b is in bootloader mode after pressing and holding down:
DPad + PowerButton + ResetButton "SerialMode" and goes to "USB MODE" when connected to the cradle. But HimaUpgradeUt.exe shows error. What could I bring it to working condition plz.

What is the error?
Try this:
http://forum.xda-developers.com/showthread.php?t=428469
It will show you how to Upgrade.