tried to install resco audio recorder...
it had asked me to put PITools.dll into the windows directory.
I uninstalled the program now there is an erorr message EVERY time i reload.. saying how it cannot find the file or so..
I even tried to replace the file however windows seems to be looking for it still?
is there anything any1 can think of to help get rid of this error msg.
I tried looking in registry edit ( for the dll... but there is no reference to it)
I'm a complete newbie to this!
many thanks!
My first guess is something in your StartUp folder is still there and trying to run.
How did you uninstall it? This frequently happens if you uninstall it manually. You could always try reinstalling and uninstalling using the Remove Programs applet.
You say it told you to put that dll in the Windows directory...what told you? Were there written instructions that told you to do that manually?
And lastly, what is the "file or so..." message....specifically.
I have installed the IIWPO (theft protection) program manually (not in ROM) for testing purposes. After uninstall an error message appeared periodicaly. The error txt is "Cannot execute \windows\IIWPO_main.exe". Also I can not find any reference to this file in the registry (maybe faulty registry editor, PHM ?) or in the startup folder. Also tried searching in the file contents on entire device. No success. Please, help, this error message is pissing me off
Hey guys.......thanks ahead of time.....
I tried uninstalling IIWPO(theft protection).........and now I'm getting this error periodically(almost randomly...but very often)...
"Cannot execute \windows\IIWPO_main.exe"
I tried removing everything I knew of.........but I obviously didn't succeed.......any help?
It's hidden as an event.
Use this to remove the hidden entry for IIWPO_main.
In you un-install IIWPO you will definitely miss out one thing: The event that makes it run after turning your device on.
There are 2 ways to remove the event:
- Use the Scarybear software
- Hard-reset
Note that after using the scarybears software, you have to do a soft reset, but NOT by pushing the reset button with the stylus. Instead, hold down the power button, say yes at the dialog box. After it's off, bring it back up by holding down the power button again.
Some time ago I downloaded and installed the Lockscreen application. This was before I truly understood how to lock the buttons !!
Tried to remove it and have been unsuccessful...
Every so often I now get the error:
Notification Error
Cannot execute windows\LockScreenWD.exe
I have to clear this 5 times in succesion and the system goes back to normal operation until it happens again.
I've tried a registry editor to clear out any entries but cant get rid... anyone got any ideas...
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.
thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.
dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library
Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt
thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.
Hi..
Tried the latest Android Froyo build on my phone with some interesting results.
I downloaded Froyo, copied the Android folder to my SD card, hit CLRCAD and then Haret. Froyo started booting, but after 4-5 lines all stopped. There was nothing happening after 15-20 min, so i pulled the battery, and started the phone again.
Now i get the message (in Norwegian)
"The file <filename> cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
The problem is that none of the programs installed on the SD-card runs. They all get the above error.
I can not install any programs (reg editors) because i again get the above message. My registry editor that is already installed wont work, and i can not install anything.
I have tried Googling the problem and i've also searched the forums here in XDA. But i have not found anything that actually might work, because they all wants to install something. I can not install anything, and all of my 3'rd party apps doesn't work.
How do i disable the certificate verification without having to install anything or run any 3'rd part apps??
Is there maybe any program that i can run from my Win7 computer??
Thanks for all informing answers..