Strange problem. For the second time in one week, there is no sound in the earpiece when answering a call. I have to turn on the loudspeaker to hear the caller. Not so great when answering a private call among strangers...
The loudspeaker works fine for audio and calls. Only the earpiece is not working. I had read somewhere something about the headset jack messing up the contacts but I've not used it in ages. The last time this happened, it finally went away after many soft resets. Anyone else with this problem? And hopefully the solution!
I have the same problem with my SPV M3000 Orange.
that's what I have too...With the original ROM
Have you found a bypass?
No.
(J'ai contacté le SAV Orange et il me le change demain)
Related
Hi all,
During calls, on handsfree (speaker), my Tytn works oke. The moment I swich off the speaker (ordinairy mode), nada. No sounds at all . My Tytn has no warranty anymore. So what can I do to fix this myself. Take it apart or is this an issue were some of you are familiair with and there's another fix for it.
Thanks.
I nearly always use a BT headset for calls since the Wing is a pain to hand hold while talking.
Nearly all people I talk to complain of a "screetch" type of sound when I answer a call with my BT headset. I've tried three different headsets, same result. The noise does not happen when I initiate the call, and I cannot hear the noise when I answer the call. at frst I thought it was just a one time event, but callers tell me the problem is consistent and loud enough that they keep their phone away from their ear when I answer.
Using a stock Wing (TMO factory ROM) with either a Jabra BT500 (most of the time), a Plantronics 590 or a Plantronics 6xx headset, same result with all.
Anyone experience similar or have ideas how to resolve?
Noone has mentioned it to me yet (just got my wing yesterday) but my MDA definitely did that on occassion. Only did it when it was on vibrate too...I think people were actually hearing the mechanical vibration on their end. And it only happenned via BT...which made it even stranger since that meant the mic wasn't even part of the phone.
Amazing, that's exactly what the problem was!
Apparently even when you answer via BT, the internal microphone is enabled for a second or two and it picks up the sound of the vibration motor.
Thanks for the advice, now to gripe to TMO or someone about the problem for what it's worth.
my mda has been doing the same thing for the past 2 days... but on all calls incoming and outgoing without the bt and it starts up with the bt but stops after a second.. is there anything to do to fix it?
Hello everyone, my Hermes worked a looong time very fine but now i cant hear the normal "beep" when i adjust the volume. Also i hear no conversation when i phone somebody. Alarm sound is off too. I hardresetted it once but it didn't help. The weird thing is: I can hear the ringing sound when i get a phone call?!
It looks like the other person can't hear me either, thats a bit weird because i thought this isnt a speaker but a microphone problem... Two components crashed on one day? WTF? Need help
I have seen this problem with a different htc phone.
their may be a bit of dirt across the miniusb contacts making the phone think it is connected to a headset.
plugin a mini usb cable and waggle it round a bit then test calling someone hopefully that should cure it for you.
I have a very very similar problem with my Vario II. The sound is VERY intermittent. Sometimes it rings but when I pickup there is no sound either way, from the earpiece or mic, the other person cannot hear me. Most of the time the phone just vibrates (set to Ring and Vibrate) so I know there is a message or a call coming...not that I can answer the call. Tried soft resetting it and even changing the ROM, only works for about 5 minutes then the sound is gone again.
The device only works as a phone with a blue tooth headset, the rest of the time it is just a PDA....that vibrates.
Ok XDA, i have one big/huge/enormous problem,
Scenario:
Talking on the phone, using the Wired Handsfree (which came with the phone), when i get another call (call waiting) the notification of the other call is going through the loud speaker! not only that, the ongoing is immediately routed the loud speaker, anyone near me can hear the conversation clearly!!!!!!
does anyone face this?
i checked it on 2 X1s, 1 black & 1 silver and it's there.
anyway to solve this
same problem for me
I have a similar problem with a Parrok CK3100. The phone can't ever seem to decide for sure what speakers it's supposed to be using.
Sometimes I'll press the Voice Command button on the bluetooth device and the phone speaks out, sometimes the car speakers speak out.
I just don't know.
Annoying that the much, much cheaper E71-2 handles all of this with great aplomb, as did my Q9h.
any one else facing this problem people?
i started searching in order to get a clue,
the main thing i'm thinking is that it's caused the same way VOIP (including skype) used to behave using speaker phone!
what do you think?
I have the same problem with a german x1. ROM R2A.
Is there any solution for this problem
thx
walk
Fixed
Bugs Fixes (Registry):
Sound is routed to the Loud Speaker when having a phone call and get a waiting call while using Handsfree
change the key HKCU\ControlPanel\SoundCategories\Ring\Speaker to 0 (default value = 1).
added to the wiki of X1
Thanks. I've changed that setting to see if it solves my problem, too.
Guys,
Have a problem running iGO Amigo on my phone, everytime I exit amigo, my microphone it mute. If I receive a call, I can hear the phone ringing, and when I answer, I can hear the other side, but they can´t hear me.
Only solution so far is to reset the phone.
Is there a problem to mute/unmute the microphone on WM 6.1 phones?
Btw, mine is a LG Incite.