hey,
i need to send my hd2 back for repair but unfortunately i can't get into the bootloader! volume up / down buttons do work when im in windows mobile, but when the phone is switched off, i press volume down + power button once and the phone just boots into windows mobile.
is there any other way to restore your phone to the stock spl?
You need to press Vol UP and PowerOn, not Vol Down
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
tried that too, unfortunately not working ...
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
JayVee said:
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Click to expand...
Click to collapse
Sorry then, Vol UP has been my other phone I haven't flashed the HD2 via SD Card yet.
I just can think that you do not press the Vol DOWN button hard enough or long enough. You have to press and hold the Vol DOWN button and switch on the phone, then lift the power button while still holding the Vol DOWN button.
Hi all
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
This what I do to go into bootloader mod in my HTC HD2 Leo :
Press together VOLUME DOWN & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen appeared
add ; 4 all ; if for any reason while you are in bootloader - tri-coloured mod - and want to go back to normal ,
just press RESET RED BUTTON , your device will reset .
hope this will help . . .
meptik said:
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
Click to expand...
Click to collapse
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no change for warranty any more .
Click to expand...
Click to collapse
Hmm, very weird.
The actual keys are obviously ok - they're just not handled while in bootloader. I'm not sure what exactly is responsible for that, I assume it's not the OS, so perhaps SPL or Radio?
Not sure if it would make any difference, but perhaps you can try reflashing the HSPL (or maybe a different radio?).
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
Click to expand...
Click to collapse
when its asking to install the rom (in bootloader) hold down volume up (or whatever key it asks you to press to install) REALLY HARD,
another suggestion, take off the back, the buttons seem easier to press when the back battery cover it off
maybe this will work
1. On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
2. Enter “1234 ” and then tap Yes.
Ooops!
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
g3k said:
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
Click to expand...
Click to collapse
it is a real wierd problem, i can switch the phone on with the power button and when it is turned on, all keys work beside the talk(send) button. but i can not go into bootloader mode and power button / volume down button to confirm / cancel update when entering bootloader mode with bootloader.exe don't work.
you should really try to reflash radio and hspl again. if you can power on the device the hardwarebutton must work. looks like a software problem...
have you check that you vol down button is working? it happen to me before,
maybe you could contact the hspl maker if he can help you? i have in my mind that he could "hack" the procedure to NOT ask for SEND key press?
Thanks for all your replies. I left the phone off for about 4 hours charging. I switched it on press the vol down button and it worked! How weird / lucky. So I flashed a new rom and I am working again.
Thank you so much for you time.
One last thing though, now in WinMo the vol up and vol down work and the power button work. But the other 4 hardware keys don't, they just force the phone into vibrate/silent mode. When I get a phone call it also turns the volume down/off/vibrate.
Maybe a hardware failure?
Matt
Hi,
i have newly bought Micromax w900 phone,
i would like to know , how to enter in bootloader mode.
When i press & hold volume down + camera + power i get factory reset option on screen,
please help me to get this phone in bootloader mode, thanks.
It has following buttons:
volume up + volume down
talk key
menu key - it triggers start menu
end key
camera key
power key
Thanks.
off topic : how much the price of ur device ????
kadamsharad said:
Hi,
i have newly bought Micromax w900 phone,
i would like to know , how to enter in bootloader mode.
When i press & hold volume down + camera + power i get factory reset option on screen,
please help me to get this phone in bootloader mode, thanks.
It has following buttons:
volume up + volume down
talk key
menu key - it triggers start menu
end key
camera key
power key
Thanks.
Click to expand...
Click to collapse
its just camera and reset button for bootloader
You can also load the SPB phone plus, this would enable you to go to bootloader mode just by pressing a button!
enjoy
try the app in my signature
I have a weird thing going on with my HD2.
When I soft-reset and hold down the vol down button it refuses to go into the bootloader screen, also when I try and hard reset it.
The phone boots just fine and the vol up and vol down buttons work just fine.
Any ideas?
Matt
Manos_Arriba said:
I have a weird thing going on with my HD2.
When I soft-reset and hold down the vol down button it refuses to go into the bootloader screen, also when I try and hard reset it.
The phone boots just fine and the vol up and vol down buttons work just fine.
Any ideas?
Matt
Click to expand...
Click to collapse
From my knowledge you have to use both down and up volume buttons to get into bootloader screen.
By just keeping volume down it's doing hard reset.
Someone correct me if im wrong.
Gjizaqin
gjizaqin said:
From my knowledge you have to use both down and up volume buttons to get into bootloader screen.
By just keeping volume down it's doing hard reset.
Someone correct me if im wrong.
Gjizaqin
Click to expand...
Click to collapse
not needed to do it for a while but im sure its just the down key
It is just the down key, when you press down and up volume buttons then power button it gives you the option to Hard Reset.
vol up+down = hr
vol down = boot
there is a program that reboots your phone and enters boot screen. try it! it is called enter boot or something like that.
another idea is flashing another radio and/or hspl2
Others have correctly told you that it is only the volume down button to boot into bootloader mode. Switch the phone off and then while holding in the volume down button, briefly tap the power button (still holding the volume button in).
Another option if this does not work, from a downloaded rom file, run the CustomRUU.exe. It will unpack a number of files in the folder you are running it from, one of which is named EnterBootloader.exe - copy this to your sd card and run it.
You know I think it is a bit more sinister than that. I think the hardware buttons themselves are ceasing to function.
Like the the phone hardware button doesn't work in WM now.
I flashed a stock ROM and that is even worse, the vol up/down don't work either.
See the attached picture - I changed to the Titanium screen and see at the top where is has "Start". I guess that only appears when the device is doing something, like when Sense is loading. I assume something has gone wrong.
Maybe I should MTTY and see where that takes me.
Any other advice would be welcome and I understand that any actions I take on my phone are my actions and no one else is accountable.
Matt
I notice a problem with my vol down, here is the symptoms. When i press vol down there is no immediate response, after few seconds of delate the system vol went all the way down to slient mode like I was press and hold the vol down button. I have no problem with vol up and I have no problem pressing both up and down to boot into recovery mode, but during recovery mode the vol down is still not working right. It also have the delate problem but doesn't seem to have press and hold effect while I just press it once.
I am running on Vibrant6 rom from the forum. Is this a rom/firmware problem or a hardware problem?
BTW it was fine when I bought it from ebay.
Question for wizards:
Is there any way to enter boot loader without volume keys?
Keys are defective.
Phone is stacked in windows screen and can not boot completely to use ActiveSync.
anyone please ?
search for this program''quick shutdown'' on this forum...it has the option to restart in boot mode
thanks for reply!
Problem is I can't access windows in my touch2. It is stacked in boot process.
Do you have any other suggestion? Some key sequence, other than vol down + pwr ?
this was my problem too. my volume buttons are not working. when i diassable my phone, volume buttons are cut from the board. so when the phone stucked at boot or something, i have to diassamble the phone then use right combination for volume button down(over the board, using a cable or something metal) + press end call button. then i can see bootloader.