Related
(Apologies to those who've read this elsewhere)
After shifting the location of my PC and plugging everything back in ActiveSync has stopped detecting my i-mate.
Things I have tried so far:
a) been through the steps of the troubleshooter
b) removed ActiveSync 3.7 and installed 3.7.1
c) did virgin install of AS 3.7.1 on different PC
All with no luck. AS resolutely refuses to detect my device. What can have gone wrong? Heeeeelp!
Do a soft reset in the device and reboot the pc, then try the hot synch again. It should work.
Should it not, here is the place to find out other options:
http://www.cewindows.net/faqs/t-shootactivesync.htm
Thanks, but tried all to no avail - getting quite depressed now! I had a quick look at your link but no immediate solution seemingly.
Happy New Year!
Well, I've just tried installing ActiveSync 3.7.1 on a third PC - still no luck. I'm thinking that maybe the problem lies with the device? Maybe I've killed a registry entry whilst being over zealous with something. Does anyone know what the registry entries are in case one has gone walkabout.
Otherwise looking at hard reset and if that doesn't cure problem I've got a very expensive phone!
Thanks
i've had several times that the xda was charching in the craddle,
& i got a removable usb disc in windows, that activesync didn't connect. What worked for me was play a little with the usb-connector in the PC or change it from usbport, so in my case it was some kind of bad contact,
You've probably checked this but I'm only trying to help:
From activesync go to tools/options/options and under 'When cradled' check USB is selected for sync connection.
Sync Problems
I had the same problems with ROM 1.03. I backed up, did a COLD BOOT then tried activesync, it worked. Then I did a restore and it still worked. I did notice one thing, I was playing with the notifications. I deleted some that I thought were redundant. Things wern't running well after I did that including the sync. After I restored, I didn't mess with the notifications except with the tool from ScaryBear.
Hope this helps,
Brandon
Brandon: Maybe you've given me the answer, thanks. It is entirely possible that I got overzealous with an excellent little program called Remover. I, too, have the ScaryBear notifications program but it seemed to leave a lot of notifications behind, so........
I'm just girding myself for a hard reset and then I will, as you say, leave the queue alone.
Plum: Thanks but yes, I had tried that. Also, selecting a baud rate and then selecting USB again to 'refresh' it.
I understand that this forum is filled with developers. So I am hoping for some informed help. If you have any of these same problems please respond as well. I would like to know if these are isolated to my setup
I migrated from a cel phone and a PPC running WM2003/2003se. Mainly for the converged device, but also for the persistent storage. I run a small business, and and am very busy and rely on my phone and schedule all day everyday.
I have only had the wizard (MDA) for about 3 weeks and experienced odd problems since the first weekhttp://forum.xda-developers.com/images/smilies/eek.gif
. Unfortunately I did not buy new, so I am not sure if any of these are covered by warranty or not... I am just going to list the problems:
1) If I leave my phone plugged in at night to charge than by the time I wake up the phone will not come out of standby. I have to press the soft reset button to get the unit to work again. This happens intermittently
2) I use an alarm program so that the unit acts like an alarm clock. If the phone is plugged in at night, and does not experience problem number 1, than the alarm just won't go off. I turn on the phone and the alarm program is open, but it did nothing. If the phone is not plugged in than the alarm works fine.
3) Soft buttons. I have the registry set to remap what the soft buttons do. I use Agenda Fusion (Latest Version) so i have them set to open the calendar and the contacts to Agenda Fusions view of them. This works most of the time. On occasion the soft buttons just stop working except for running through the menus for reminders.....
4)The other day i went to take a photo, the camera said that it could not proceed because there was not enough memory. At the time I had 30 megs of storage free, about 12 megs of program free and about 900 meg left on my sd card...
5) Every so often the unit won't launch a program, it says that the exe is unsigned or not trusted. It works every other time though.
6) I use cLaunch. Every so often cLaunch disappears from the today screen. The only wat to get it to reappear is to remove it from the today screen from the today items menu, wait a couple of seconds and then return it to the today screen.
7) Every so often the unit stops recognizing the sd card..have to remove and re-insert
8) I use reminders for all my calender and to do items. Occasionally the reminder will go off for a certain item 24 hours in advance, even though the setting is correct in the item...
I feel like I am missing a few problems. But you get might point, WM5 is weird. All of the above can be corrected with a soft reset. But sometimes the problems show up multiple times a day. Causing me to have to soft reset in the most inconvenient times, several times a day.http://forum.xda-developers.com/images/smilies/mad.gif
I did not have these problems under WM2003. I have a friend who uses a Verzion phone that is similar to the wizard (made by a different company though, not HTC...it has an external antennae and that is where the stylus is stored as well) She and I were comparing phones today. Hers runs WM5 but she said that she has never experienced any of these problems in the 1 year that she has owned hers...
Is this an HTC Wizard problem? A WM5 problem with the wizards? Would it help if i installed on of the alternate roms that I read about here on XDA developers? I am considering a hard reset and starting from scratch but I don't want to go that route unless it is the only way. And if I do, I may just use one of those roms.....What does everybody think?http://forum.xda-developers.com/images/smilies/confused.gif
Sorry for the long winded post....
Seems like a software problem based on (1) and (2). Is the ROM an official ROM?
Re:
Hello Hanmin Thanks for responding,
Re Number 1. I just saw that some one else posted with that problem. So I will see if they have they same alarm program installed. I have wondered if everything is software related. Thats why I am hoping to see if others are having these types of problems, and if so, what programs they are using...
Re the rom...yes it the official T-mobile release, version listed in my sig.
Thanks again
New problem
I have just encountered a new problem:
While picking up my voice mail the system would not register my button pushes. Weather on screen or the hardware buttons. I could not interact with voice mail, nor could I end the call with the hardware button or the soft button....I had to reset the phone to end the call!!
How frustrating is that
Have you tried reflashing the original ROM? Being a used phone that would be the first thing I would do. It's going to wipe out all your data and return it to an "out of box" state, so i suggest backing up anything important and sync to your PC. If that doesn't work then you have a hardware issue but I'm willing to bet that should take care of it. You can find the original ROM on HTP's website. Good Luck
Thank you
Thanks for that suggestion....I am hoping to not go down that road, if I can help it. But I will do it if there are no other options. So If I may ask: How many votes does re flashing old Rom Get? And are there any other ideas?
Again Thanks. I am going to download the rom in case it does come to that....
wait...the phone dosen't wake up unless you push the small button on the top of the phone? That is not the default setting on the MDA, however it's acting naturally. Our phones go on a standby to save power. Click the battery icon in the lower right hand corner-->Click the Advanced tab--> uncheck Turn off device on external power
Misunderstanding....
When the phone is plugged in over night and reaches %100 charge some times it won't "Wake Up" even hitting the power button on top. The only thing that will turn it on is the "Soft Reset" button on the right side, beneath the IR sensor.
bump
no text
No text
Just bumping
It sounds like you have software problems - possible a corrupt notification queue - personally i would do a hard reset of the device - probably in the process of this i would soft reset before the t-mobile extras install - taking details of gprs, mms settings before this.
I would run the phone without installing software to see that its not a hardware problem. Then reinstall programs one by one and see how it goes. Some software like claunch is not made for wm5 so expect some glitches (i use claunch and get occ glitch)
If you dont want to hard reset check the notification queue for duplicates and rogue scripts using check notifications - attached - install via pc. Dont delete notifications important for system running - common duplicates are clock\calendar.
alarm problems
Hi,
frankly i had similar issues - less critical but annoying: alarm clock not waking me up, slow system, notification queue mess, difficult resets, camera issues, bluetooth a2dp skipping. I upgraded my Qtek multiple times, and finally i can say that 2.26 roms (i use molski's) are exceptionally stable and reliable. The problem is not Wm5, the problem is how buggy many released versions are. So, my suggestion: look to the forum, find roms that appear to have a reliable history, cross your fingers and...upgrade. Then, resist in upgrading to any rom that just came out and appear to be faster, cooler, nicer. Unless you have an issue to be solved, and you see 100 messages confirming that the rom is stable and does the job...
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
cameraddict said:
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
Click to expand...
Click to collapse
Write them down manually its the safest way - there are cabs available but often dont work.
GPRS - settings\connections\connections\manage existing connectons - settings should be here prob named t-mobile
MMS - go into messages\menu\options\MMS\servers click on prob t mobile again.
Thanks again!
I think I have a fairly unmodded phone...
Its still not unlocked, no rom changes, etc.
I just have programs like: PocketWeather, iLauncher and TomTom with a few simple additions like the new program that auto disconnects data after a preset time.
Well it seems very random, but when I fire off things like TOMTOM it just hangs, but not every time.
Not many. Generally speaking, when I'm having issues, it's my fault. But I do have issues with my OK button periodically disappearing, and sometimes non-responsiveness of some apps.
But, it's very rare. I usually do a soft reset every couple of days when something even remotely starts to act up.
Same with mine. I use the latest i-mate WWE ROM and find it stable.
@sk0t:
my OK button periodically disappearing
Click to expand...
Click to collapse
Do you use Magic Button?
Nope. That's what's weird about it. I'll push the OK button on the front, but the app will still be up, and the OK button will disappear on the screen. I can usually get back to the Today screen by pushing the end call button though.
mine is now very stable. There is another thread that lists the "best" things to do to stop the periodic freezing. My 2c worth is on that thread also
I use Mortsaver to lock and close the device when i'm not using it. I think this results in a very stable device. It will wake up for SMS alerts and calls but for the rest of the time it's asleep - except when you are actively using it of course.
I also use SPB Backup at 05:00 in the morning which performs a soft reset after the backup. This keeps it clean too.
Defragging the Storage card and keeping as many apps as you can off the storage card also helps.
btw I use Magic Button
I only asked about Magic Button since I've noticed that the close button disappears sometimes in "Program Manager". It comes back again with a simple tap on the window background.
See thats the odd thing.... someone else told me to try and keep my unit's memory as clear as possible to avoid possible lockups.
Is the general consensus that its the other way around?
I have the vast majority of my applications saved on my storage card, granted I have tons of space on it.
I do experience frequent annoyances when using mine.
- screen alignment sometimes acting up (will send it back, but I'm waiting for the firmware update to be released, so they can do it together)
- mediaplayer occasionally loses the storage card (solved by deleting MSMETADATA on the card)
- occasional refusal to use an existing gprs/umts (have to disconnect and reconnect)
- vpn shutting down too fast when using it with wifi (after 30s)
- activesync sometimes doesn't recognize the device, forcing me to rename it and perform a whole new sync
- occasional difficulty in connecting to the correct wifi network (e.g. when there are 4 available, it pops up a couple of times that it has a network, but the one I always connect to is the last one to be found)
...
I have been using it for about a month now (was already sent back twice for keyboard and screen issues), and had to perform 3 hard resets as the behaviour got worse. I really like the device, but I wish there were less issues.
Jörg
After seeing the specs of the Hermes, I wanted it immediately.
Last week I finally bit the bullet, sold my Wizard (Cingular 8125) and got the Hermes.
For the most part, they are the same device, with the addition of 3G and a supposedly faster processor in the Hermes.
The Wizard was about as stable as a Windows Mobile device could be, at least in my opinion. I really didn't do much outrageous with it. I had a couple of games, TomTom 6, a dialer skin, and Good Mobile Messaging installed. I'd have to reset it maybe once a week or so, sometimes less than that because TomTom would lose connection to the GPS and nothing would get it back save for a reboot.
I took my Cingular 8525 (Hermes) out of the box, and I was really impressed by the device. The keyboard is far superior even though it's only a little different. I like the styling of the Hermes better, as well as the nice gunmetal finish. Download speeds are incredible (almost 900K in my house), and setting up Good Mobile Messaging OTA only took about 5 minutes vs. 20 on the Wizard.
The only problem is the instability. Sometimes I click on the "Start" button and it will make the click noise and light up, but it doesn't drop the menu down, requiring a reset. Sometimes the phone will shut off the display and trying to turn the power back on does nothing and requires a reset. Sometimes the phone will show remnants of windows that were recently closed and that will require either opening up other programs to clear them, or a reset. Then there's the just plain ol' freeze. Not to mention that plugging in my car charger barely ever activates the charging circuit on the phone
I've had this phone for about 6 days now and I have to reboot it AT LEAST twice a day, sometimes three or four. AT LEAST. This is wholly unacceptable. If we weren't on the cusp of a firmware upgrade that is rumored to rectify most of the problems above, I'd be selling this and maybe getting a Treo 750 or a BlackJack.
I've had so many little issues like this with my Tytn, using both standard and latest roms, that I've simply decided to sell it. Its just not a great phone or a pda, although it has all the features you could ever dream of, it just never seems like its fast enough and the software just doesn't seem all that polished.
2-3 on a good day. It usully is in the range of 5-6 for different reasons. Keyboard doesn't respond, stuck on caps, no volume, random freezes, screen won't turn on. Gets annoying after a while.
i835 chirp said:
2-3 on a good day. It usully is in the range of 5-6 for different reasons. Keyboard doesn't respond, stuck on caps, no volume, random freezes, screen won't turn on. Gets annoying after a while.
Click to expand...
Click to collapse
Regarding the stuck on caps problem: if you select caps using the onscreen keyboard, then the physical keyboard is also put into caps. It is however not possible to turn this caps-lock off in using the physical keyboard. The solution is to open the onscreen keyboard, and turn it off there.
Jörg
8125 versus Hermes
I agree with you that the 8125 Wizard was more stable than the Hermes. I had one as well, and it would go weeks without resets or freezes.
You said:
" The only problem is the instability. Sometimes I click on the "Start" button and it will make the click noise and light up, but it doesn't drop the menu down, requiring a reset."
I believe this is due to the external storage becoming lost. Since WM5 doesn't expect storage to ever go away, it just freezes waiting on the storage to come back. In the case of the start menu, I think it's waiting so it can get the icons of recently used programs. Just a theory.
To fight this problem, I've loaded weather programs and the like into main memory so that external storage is only accessed when I'm playing with the phone. That's made my hermes a lot more reliable, down to a failure or freeze every few days. Not as good as the Wizard, but tolerable.
I'm having a TON of problems...
I have my Cingular 8525 HTC
ROM Version: 1.34.502.1
ROM date: 09/21/06
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
I am having horrible problems with it randomly locking up, and I have to soft-reset. This usually happens when I have it on the charger overnight, and someone text messages me while it's on the charger... and of course when I soft-reset I lose all the messages! What's even worse is when it boots back up it'll vibrate, and beep for a long time like it's getting messages and I have to just ignore it and put it on silent... but there are no messages! Is there a way to fix this? What do I do?! I'm starting to get very frustrated with the phone - the only thing I use repeatedly on here is the MS ActiveSync over the air...
Do you think this could also be something to do with the variant?
I have Vario II from T-mobile, with all their stuff still on it, and I have installed/uninstalled goodness knows how much stuff, and don't really have this problem at all (touches wood). I can go for 3 or 4 days without soft reset, and then that is usually after a backup, when you have to.
I have all today screen and any software which is in startup, installed to main memory.
Also, could password screen have something to do with this? If on charge, and password protected, maybe they interfere with each other on receipt of text message. You could try removing password for overnight.
Have you tried leaving messaging running minimised overnight?
Also, have you moved any databases to storage card?
marisa4755 said:
Do you think this could also be something to do with the variant?
I have Vario II from T-mobile, with all their stuff still on it, and I have installed/uninstalled goodness knows how much stuff, and don't really have this problem at all (touches wood). I can go for 3 or 4 days without soft reset, and then that is usually after a backup, when you have to.
I have all today screen and any software which is in startup, installed to main memory.
Also, could password screen have something to do with this? If on charge, and password protected, maybe they interfere with each other on receipt of text message. You could try removing password for overnight.
Have you tried leaving messaging running minimised overnight?
Also, have you moved any databases to storage card?
Click to expand...
Click to collapse
This is an interesting idea. I will leave the messaging minimized overnight tonight. The password screen is there as a matter of policy - through my work - since the company owns the device and they push policy to it which requires a password PIN to be entered after 15min of inactivity... I'll try that?
Anyone else having that weird sound problem with it repeatedly "pretending to get messages" after a soft reboot?
i835 chirp said:
2-3 on a good day. It usully is in the range of 5-6 for different reasons. Keyboard doesn't respond, stuck on caps, no volume, random freezes, screen won't turn on. Gets annoying after a while.
Click to expand...
Click to collapse
when i have this issue i click the ok button on the side and then it startss to work again without soft-reset.
rx8volution said:
Anyone else having that weird sound problem with it repeatedly "pretending to get messages" after a soft reboot?
Click to expand...
Click to collapse
Are you sure that the sounds are messages rather than notifications?
It could be that your notifications queue is gummed up with lots of stuff. Suggest you get Memmaid or similar, download the trial and run the notifications queue duplicates remover. Then look at any of the entries marked Calendar and check to see if any of these are in the past. If they are remove them. LEAVE ALONE any notifications that are not Calendar with a description of one of your appointments or reminders.
Worth a try.
I also had some troubles. It freezes anywhere between 2 and 20 times per day. I just did a hard reset few days ago and tried to determine if any of my programs installed causes it.
It runs quiet well with nothing installed. Most freezes i get after installing SBSH WeatherMonitor.
About the sudden loss of external memory, i cannot complain. I install everything system related into the main memory. But weather and flexmail are on the card. I even take the card out having the phone running.
Not probs there.
Generally my Blue Angel is a far better phone, although bulky like my grand mother and not useful in Japan.
Thanks for the replies. After reading through this thread it seems I am not the only one with problems. Nearly every 8525 problem I've had can be solved, they just keep coming back. Like 8525 not recognizing Storage Card music. The worst for me ( happens a lot ) is that when I put the phone on the charger, then the screen shuts off to save power, but when I take the charger out the screen cannot be turned back on and needs a soft reset.
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
tvrman said:
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
Click to expand...
Click to collapse
Hi tvrman.
For starters, install Sprite backup (on one of the CD's you got with the Ameo). This will eradicate the need for a full install after a hard reset in the future!
I suggest you do a full hard reset anyway then install Sprite Backup utility.
Only put back your essential apps one by one with 1/2 a days gap between each installation and test the turn off turn on function.
Be sure to use the supplied X-Button application to ensure you properly clode apps down after you're finished with them....or use Wisbar Advance 2, which will do it for you....except for Active Sync (this will always remain active unless shut down manually in memory menu).
I have not once suffered the problem you have in over a months use of the Ameo....might be a faulty unit or a buggy ROM. What version ROM are you using?
Anyway, if all goes well over the next 3 days, do a full backup and save a copy to your storage card or micro drive and be sure to copy a copy over to your PC...that should future peoof you having to do a full install again in the future. And be sure only to back up, if you have no problems with the device and the problems you mentioned earlier. Otherwise you will allways restore the bugs in the device after a hard reset.
Hope this helps. keep us updated on how you get on.
Mackaby007
thanks for you professional answer, i was not aware that spd backup
was on the cd which was delivered at the ameo.
Well yesterday i found out that one of the programs (profimail)
which i'm using serveral times a day for my mail, that this is the problem
I found out that yesterday i didn't use profimail but the built in mail the
whole day and the ameo did not freeze at all the whole day
tried to turn it off an on the whole day and no problems at all,
yesterday late i start profimail and check serveral mails, i close profimail
and turn the device off, later turn it on and a black screen it would not
turn on
After soft reset everthing works.
So i will check today again without using profimail and see what's happends
again.
i'll let you know....
hi,
I had the same problem.
My solution was to format the mini-sd card.
So what i did:
1. copied all data on de minisd in a cardreader to a directory on pc
2. Formatted (not quick) the minisd
3. Copied all data back to the minisd.
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Anyone else find this? Shame as it is the program I like the most
Robert
tvrman said:
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
Click to expand...
Click to collapse
Have you got a password to lock your phone try removing that see if it still locks , i was having the same issue
Mrsums said:
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Anyone else find this? Shame as it is the program I like the most
Robert
Click to expand...
Click to collapse
No such issue here! WA2 runs like a dream on my Ameo...even better than it did on my Hermes or Prophet! I'm using the 2.8.0.2 version of WA2 without WAD.
WA2 + WAD
Yes, in my case it was also WA2. I made my own skin and all work fine. But in time I got more lock-ups. So I decided to reinstall everything. Then things went wrong. That day I have installed everything 6 times. Every time I had lock-ups when I pushed the power button and activated it again. But after disabeling WA I had no troubles anymore. The last production and beta version have the same problems. At this point I have to advice not to use WA2. I did not examine every feature of WA2. So there can be one feature that caused the problem. I made my own iPhone landscape skin and I was very pleased. Could somebody try this skin to see if it freezes their device?
skin
iPhone skin ftp://xda:[email protected]/Uploads/Software/iPhone.rar
I use a lot of apps. I also use the following plugins on WAD:
SPB Diary
Profiles for Windows Mobile
Windows Life Messenger
QAN said:
Yes, in my case it was also WA2. I made my own skin and all work fine. But in time I got more lock-ups. So I decided to reinstall everything. Then things went wrong. That day I have installed everything 6 times. Every time I had lock-ups when I pushed the power button and activated it again. But after disabeling WA I had no troubles anymore. The last production and beta version have the same problems. At this point I have to advice not to use WA2. I did not examine every feature of WA2. So there can be one feature that caused the problem. I made my own iPhone landscape skin and I was very pleased. Could somebody try this skin to see if it freezes their device?
Click to expand...
Click to collapse
I'll give the skin a test run in an hour, but I refuse to use plug-ins again. They have always caused me problems, but WA2 never has. What version were you running?
Tried the i-phone skin and have experienced no issues whatsoever.
Maybe the Problem is WAD and your plug-ins.
WAD keep on giving problems like this...it's a sin for such an interesting application...here it is because I gave up to use it.
Mrsums said:
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Click to expand...
Click to collapse
I did some searching and found some suggestions it might be the skin I was using. I changed the skin and no more freezing.
Robert
trayap.exe
Since I removed the trayap.exe from the init part of the registry I did not have any freezing anymore. I will try WA2 again to see if this solves my problem.
By the way, I am using the latest beta's of WA2 and WAD
hi all
i find that if i use the off button to turn off the backlight whilst media player is running it jams the machine, requiring a reboot. i know that i can usethe light button on the keyboard but i sometimes forget that media player is running (ie. paused).
I have the same freezing problem now after a few weeks of usage.
The device was running very nicely but now, without installing anything further or adding anything to the device, it freezes randomly.
It likes to freeze when the backlight goes off, while I play MP3 files or have a phone conversation using bluetooth.
In the past 4 days I have softreset the device no less than 81 times.
I suspect the Microdrive is to blame. Is it sensitive to movement?
I will remove all my software and other files from the microdrive and see if things improve.
In the mean time, has anyone else experienced random and frequent freezing?
Oh, I have the Dopod U1000 branded device with the latest firmware.
ok, I had it with this. 16 more soft resets within 4 hours.
I hard reset the device. So far I see no random freezing, but I didn't install anything extra yet except ozVGA and VJBigPhone. And both of them on the internal memory, so nothing on the microdrive.
I have just got a HD2, and used activesync successfully for the last 2 days to sync contacts and load the HTC hotfixes from their web site. Today however, it has just stopped working. The phone connects (but takes a very long time) and starts the sync process, but then the progress bar doesn't move at all for ages or sometimes moves to about half way in 10 minutes but won't get any further.
Before the status bar starts moving and randomly during the sync process I get the message "A problem has occured with services.exe Please tell microsoft about this problem...." The status bar usually starts moving a little after sending this error report. I also get the message "A problem has occured with connmgr.exe...."
Trying to stop activesync freezes the device completely for several minutes but it usually frees eventually although I have had pull the battery a couple of times.
Occasionally when it does start I get the warning message "There has been a change made on your server that requires you to re-synchronize all items on your device. All changes made since your last successful sync will be lost. Do you wish to continue?" although I have made no changes whatsoever on the PC. I've never come across a message like this from activesync before on any other device.
Has anyone had these problems or have any idea how I can fix them?
Cheers
Do you have sync problems with 3G or with USB? It usually happens to me with USB.
Try this. At Settings|Wireless, turn off Direct Push. Turn off Data connection. Go to mail. Do a Menu|SendReceive. If it works, then go back to enable those two options. I have no idea why but this often works.
Unpluging the USB often makes it better.
delete profiles in actvie
sync tools->active sync
soft reset
sync again
Be happy
Sfr0g, how do I delete the profile? I can't find that option.
Cheers