I am pretty sure that this question has already been asked somewhere, but I wasn't able to find the answer.
I am trying to manualy open a data connexion with my Tytn. At the moment the default connexion is "my work network" and everything goes through the wifi. The main issue is that with this configuration when I want to open a edge/umts connexion I have to set that the default connexion is "my isp" and I have to dial connexion manualy through the menu.
If I set "my ISP" as default connexion, it connect most of the time automaticely with edge/umts; even when the wifi is available.
I am looking for something (tweak, app, cab, ...) letting me add a shortcut to my gprs connexion, so that I can setup "my work network" as default and manualy start gprs/umts connexion on demand.
Related
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
egg said:
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
Click to expand...
Click to collapse
maybe i'm to simple, but i only use Internet settings and don't use @work @all.
And it works fine everywhere, @home, @work, via GPRS and via WiFi. Have you tried this?
and why would you put your gprs setting under Work?
Extremely sorry no one has replied to your post with a solution yet, I maybe too late but I only joined this forum yesterday.
You want multiple Network settings with independent Proxy settings and IP, DNS etc right??
Go to Start>Settings>Connections>Tap connections >go to the "Advanced" Tab. Tap "Select Networks" Here you are given 2 Choices of Network settings you can use. Work Network and Internet (or ISP). You have your work settings saved on Work network so do not edit that. choose the other one and edit it to enter all your GPRS settings. and save as your gprs connection. Now if you want to add a third independent setting, from the select Networks tab, click on new and you can create a third Set of connection settings (for your home maybe). Your PPC can handle 2 simultaneous connection settings perfectly, ex. 1 for Pass through and 2 for GPRS. But each time you want to connect to a third or different setting, you just go to the "Advanced Tab"> select Networks> tap the pull down options menu and select the other connection set that you would like to use et voila it is that simple.
I have a HTC S710, and does anyone know how I can use IPsec VPN? I've got Bluefire VPN wich supports it, but when I try to connect it says
"The Connection Settings do not allow a VPN connection to be established. The device may be configured to use the same network for both The Internet and Work. Please verify the Connection Settings and try again (-71)"
Ive looked all over for this sort of settings, but havent been able to find any. Anyone to help?
under wm6, have a look at settings - connections - connections - advanced - select networks
the settings for internet and private network must be different
for internet, i have "my isp", for private network "my work network"
with these settings, bluefire works in my university vpn network
under wm6, have a look at settings - connections - connections.
Here's just an empty list, I can't seem to find the "advanced" option.
I have deleted my GPRS account, because it kept onlining, and I want to use VPN over Wifi.
In advance, thanks
settings - connections - connections
there should be two headlines, "my ISP" and "my work connection", these are built in
"advanced" is a tab at the bottom of the page
I've just flashed the Touch ROM onto my 8125 an I'm having a hell of a time trying to disable all of the gprs and such, I can stop IE from connecting, but the weather will go through everytime, how do I stop it if it is charging me
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
Hello! I have a problem with WLAN. I couldn't find where to set up my proxy and port settings for WLAN. If I go to the start > settings > conections I can't set up a wireless network, just 3g, bluetooth etc. (but there are settings for proxy), but if I go to start > settings > network cards and then tap Add new there are just options that i need exept those two. Help me please!
P.S. I have WM5 and Qtek 9000 (HTC Unversal)
OK, after about 10 minute trying, I finally get it done.
When you select one AP name in Wi-Fi setting,it will ask which profile will the connection connects to.( I use Chinese version, I guess it will be "Default Internet" and "Default Company" ).The two connection is the two you select in setting->connection->connection->advance tab, the upper is "Internet" the lower is "Company", and you can make a new profile here using the "New" button,here you will find proxy setting and enter some proxy , because you are just using this profile in wi-fi ,so the "moderm" can be left blank.
When you have done the setting, you can turn on Wi-Fi, browse some web site, in taskMgr(additional application I installed) you will find the ppc has establish a tcp connection to the proxy server you set up.
I'm sorry to bring this up again folks, I have read and searched forum for similar threads but am still confused.
I find the WM6.1 network connections interface very confusing. Can anyone tell me step by step how to setup vodafone?
Should it be setup as part of "My Work Network" or as its own "Vodafone Live" ?
When I set it up, I still want my phone to use my WiFi connection at home as default, and only use vodafone live if I specifically tell it to. Is this possible ?
Under Netwotk Management
Surely "programs that auto connect to the internet" and "programs that auto connect to a private network" would be one and the same no ? What about when we use our private network to connect to the internet (via router etc) ??
as I say, I find the entire windows mobile networking system a mess, very confusing and have never gotten vodafone live working properly.
btw, my phone is HTC Touch HD
Many thanks for any desperately needed help
Update...
If I setup the phone to use just "My Work Network" under both "programs that auto connect to the internet" and under "programs that auto connect to a private network"....
and then manually setup vodafone under the "My Work Network" device as follows...(using my local vodafone settings)
1. add new modem connection
2. name it (vodafone etc)
3. select modem to cellular line (gprs, 3g)
4. enter apn "live.vodafone.com"
5. username and password - "vodafone"
6. under "My Work Network" setup proxy as 10.24.59.100
7. under advanced set socks to 10.24.59.100:1080
Then it works. I can disable wifi, enable data connection and browse the internet.
THE PROBLEM here, is that if I go into college, and use my phone over their wifi, the proxy server gets changed thus disabling vodafone all over again.
So, it works if you set it up manually under the "My Work Network" device. But I need it set it up as a seperate device so that the proxy doesnt get messed up. I have tried editing the auto created "vodafone live" device, it just wont work. I tried editing the "my isp" device but that has no proxy setting.
Can anyone please help me make any frickin sense of this. ?