Hey Guys,
Ive been using a trial of voice control for a few days now, and wondered wether i have to press my mapped button everytime i want to tell my xda what to do.
As far as i can make out, if i have to press a button each time, it looses its appeal quickly
I use the hands free xda headphones to command it, so while im on my bike it would be nice to tell media player what to do without pressing a button in my pocket each time.
Please help,
Adam
There is no "Microsoft Voice Control", neither there is a "Microsoft Voice Command Trial"...
Chatty said:
There is no "Microsoft Voice Control", neither there is a "Microsoft Voice Command Trial"...
Click to expand...
Click to collapse
I apologise, using the word "control" rather than "Microsoft Voice Command", and there is a trial of this software, im using it right now and I downloaded it from http://www.handango.co.uk/PlatformP...2&platformId=2&productType=2&productId=151270
So does anyone have an answer to my question above, do I have to press the button to start "Microsoft Voice Command" everytime I want to do somthing.
Thanks
i suspect that it does it like that because of cause if it would just catch the commands when ever spoken it would have to be turned on all the time
and if it were running like that it would be trying to recognize background noise and voices as commands all the time and use even more power and possible recognize some of the stuff as something and do odd things
I thought that might happen too, then i realised i have the 2 call buttons on the handsfree earphones that are easy to access (ref and green caller buttons) however i cant map these to voice control, does anyone know how to hack the button mapping ? like the volume sliders
You can only map buttons 1,2,3,and 4
Thanks everyone for your inputs, i have now managed to map the green or red buttons to anything i like, so now i can use my xda earphones green button to tell voice control what to do, works a treat, if anyone wants to know how, just ask.
adam_beasley said:
Thanks everyone for your inputs, i have now managed to map the green or red buttons to anything i like, so now i can use my xda earphones green button to tell voice control what to do, works a treat, if anyone wants to know how, just ask.
Click to expand...
Click to collapse
pls go ahead and post how u did it..
Go to http://ae.inc.ru/aebplus_t.html and install this simply utility onto your XDA (found searching on the forums earlier)
Once this is done, you can choose to unmap hardware buttons (red and green call buttons) as well as the volume slider etc etc
Then, like voice control requires, you go to control panel > buttons.
You will notice the usual "Button 1, Button 2" etc, however now you have the option to map "Green btn" or "Red Btn" (or any button you unmapped)
Link voice control to either of your choice, I used green for this test. Once you have done this, plug in your xda official headphones. You can then press the green button on the earphones to activate voice control, and therefore instruct it to do the usual things.
Tonight this was especially usefull on my bike to work, allowing me to change songs without having to stop and take my xda out my bag each time.
This obviously means you loose the use of the green button for accepting or making calls without remapping each time, the onlt workaround for this is having "Phone" on the start menu and just using the touch buttons on the dialer for calling etc.
Hope this is of use to some people out there, its certainly prompted me to buy the full voice control later today.
You can still use the green button to make calls!
Press the button and say 'CALL whoever'
although it isn't a good idea to make calles while on a bike anyway :lol:
Green Phone button mapping
@adam_beasley:
rather than place the phone icon (shortcut) in the start menu, why not map the phone to let's say contacts or calendar buttons?
you can also map 3 programs to a single button & access the programs by the number of press(es). program 1 = single press, program 2 = double press, and so on....
also, you may try to map the phone function as program 2 in the green button so that when you double press it will function as the usual phone button.
unluckily, I can't test & confirm to you since I haven't reinstalled it yet after the upgrade to WM2k5 V1.60a.
Cheers.
The problem i have from all of this, is that during playback on media player i toggle the screen off to save power, when i do this, my red or green buttons do nothing, even with button lock off.
So even tho this system works well, its flawed bigtime for me over this one problem, anyone have some ideas ?
Why don't you try turning the backlight down to 0%, but leaving the screen on? It's the backlight that is responsible for most of the battery drain.
You could make a profile in PocketZenPhone with all the settings for your audio playback (backlight, volume etc). I seem to remember there is a way to make PocketZenPhone change profile from a button press - you could map a double click of 'hang up' button to change profiles.
I also switch the screen off whilst listening to MP3s and have mapped the Action (joystick click) button to 'toggle' the screen display. In this mode pressing any other button does toggle the screen back on. I do not have the ButtonLock on as you can't then wake the machine up to accept a Voice Command. I have Voice Command currently mapped to the Record button on the side of the device but would like to map to the Green button. I would prefer single press - to answer the phone, double press - to activate Voice Command. I have e-mailed a few questions to the author of the AE Button Plus utility to confirm this can be done.
anybody want voicecommand
Email me i will attach to you.
If only we could map the BT headset to the green button....
Is there a way to get the BT headset into the option list for the green button. Is there some other BT program that facilitates the recognition of the main button of the BT headset?
AE Button Plus has inactivated several buttons in my Blue A
Well, it seems i should read with more attention, but now that the damage is done I hope someone can help.
I installed AE Button Plus in my Blue Angel, and as a result the ok and explorer buttons do not respond to anything anymore. I then unistalled the program, did a a full back up, a hard reset followed be restoration. Nothing has changed, these two buttons are still dead. The don't even show on the list of buttons anymore. Argggghhhh!!
Any help will be appreciated. Thanks
Hi, this is slightly off-topic, but I tried the PC version of Voice Command a long time ago (I don't think M$ still has it out on the streets), and it used to listen to every command, but won't do anything unless I begin the command with the word "Computer"... e.g. "Computer, what time is it?"
Wonder if there is such a switch for the O2... :roll: O2, what's my battery status :lol:
Re: AE Button Plus has inactivated several buttons in my Blu
gonzaloblanco1992 said:
Well, it seems i should read with more attention, but now that the damage is done I hope someone can help.
I installed AE Button Plus in my Blue Angel, and as a result the ok and explorer buttons do not respond to anything anymore. I then unistalled the program, did a a full back up, a hard reset followed be restoration. Nothing has changed, these two buttons are still dead. The don't even show on the list of buttons anymore. Argggghhhh!!
Any help will be appreciated. Thanks
Click to expand...
Click to collapse
This happened to me at first, but i think your biggest fault was backing up while having this error, now any restoration is going to have this fault.
Rather than uninstall, just try installing it again, however when then screen appears with buttons to handle (about 7 drop down boxes), just choose "Do Not Handle" on each button then soft reset, worked on mine, then I uninstalled it.
How to upload the files to ftp, i have voicecommand 1.5, it working fine with me.
hello,
i have a problem with my xda neo:
holdung hardware buttons doesn't work anymore.
for example the volume keys: some days ago i could hold down the button on the side and the volume gets reduced until the phone is silent. or in menus or contacs i could hold down the cursor button and the selection was going down. now it goes down only one entry and doesn't scroll down anymore. may i have disabled it? i have sktools but i did not find the setting for it.
does someone know, what i have to do?
ps: i don't want to hardreset
edit: ok, looking around in tools and registry didn't help. but the built in settings dialog was the solution. sometimes the easiest way is the solution
heh lol, good you fixed it
With a complete lack of knowledge how to fix it I was already ready to give you advice to make a backup of your phone, do a hard-reset and check if the button was at least still working. Then you could have put the backup back again and you are up and running. Which would at least have ruled out hardware problems
I'm getting annoyed of this. I'm having a hardware issue. When I press the green answer button, it doesn't work I tried remapping my softkey buttons so I can use my left softkey to activate phone. Just now, my left softkey doesn't work. I tried getting a edge of a notepad with a sticky side trying to grab the dirt if it is dirt. That didn't do anything. Anyone else sharing my pain and running out of button?
thomassster said:
I'm getting annoyed of this. I'm having a hardware issue. When I press the green answer button, it doesn't work I tried remapping my softkey buttons so I can use my left softkey to activate phone. Just now, my left softkey doesn't work. I tried getting a edge of a notepad with a sticky side trying to grab the dirt if it is dirt. That didn't do anything. Anyone else sharing my pain and running out of button?
Click to expand...
Click to collapse
Haven't heard of this before! Do you actually see dirt around the buttons in question? How did dirt get there? When you press the green phone hardware button, the phone doesn't activate? Now the left softkey doesn't work? Are these the only buttons that don't work? What about the camera, voice record, comm mgr buttons? How long have you put up with your issue? Did this just start, or been going on for awile? It could be the result of corrupted 3rd party software installed that's giving you these problems. Have you installed any software pertaining to the phone ie: contacts, call history,etc. these kinds of software?
8125
2.25.11.1
i've been flashing 15 different roms. All my buttons work except that one. I figure that the button just failed on me. My 1 yr warranty is over and I'm not sure HTC will do anything about this.
hotdog53 said:
Haven't heard of this before! Do you actually see dirt around the buttons in question? How did dirt get there? When you press the green phone hardware button, the phone doesn't activate? Now the left softkey doesn't work? Are these the only buttons that don't work? What about the camera, voice record, comm mgr buttons? How long have you put up with your issue? Did this just start, or been going on for awile? It could be the result of corrupted 3rd party software installed that's giving you these problems. Have you installed any software pertaining to the phone ie: contacts, call history,etc. these kinds of software?
8125
2.25.11.1
Click to expand...
Click to collapse
Recently I am having problems with my phone, and am wondering if it is a software or hardware problem.
I have tried loading the TNT4 rom & WS5SE roms (this is a g4), and there is no change (im on the Tnt4 one now).
The touchscreen works okay, but the soft key buttons do not. The right bottom one is okay, the left one triggers the right one, the send button show the letters "uytga" on the phone screen when i press them, the end button shows "mn" or something, the camera button works perfect, the comm manager button is the same as the voice button (even when i map it with a program it says "button 4").
It even happens on the soft keys on the keyboard when i slide it out.
Also I used Start-sSPL to put the roms on. Is there a way I can get the OEM one back on or fix the button problem?
Any help will be appreciated.
Hi,
my P3600 has a problem - pressing call and hang-up button as well as ok, menu and 2 function buttons on the top keybad do not work.
However, center and direction buttons do work.
This happened before, then worked again, now happening again.
Any ideas anyone? a HW problem or a ROM / hardspl problem? (tried different roms same thing happens)
thanks for your help.
Needs a bump
Just bumping the thread cause I have the exact same problem on my phone. I had it in my camera bag on a hiking-trip this weekend and I think either it was pressed against something or the moist got it. The center buttons still work, but I dont think its on the same connector inside.