Related
Does anyone know a way to put the date on the taskbar with the start button and time etc? I want to do this so I can remove the date from the today screen, and also so I can see the date from any window, like the time.
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
At section `Change the display of the clock in the taskbar`
Note: Once you've change the registry. Give it a good (say) 3-5 minutes for it to have it registered/stored before doing a soft reset. If the time/date doesn't change after soft reset, check the registry again, probably you didn't give it enough time to update. Although this reg edit is relatively harmless, back up your device before doing so.
hanmin said:
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
At section `Change the display of the clock in the taskbar`
Note: Once you've change the registry. Give it a good (say) 3-5 minutes for it to have it registered/stored before doing a soft reset. If the time/date doesn't change after soft reset, check the registry again, probably you didn't give it enough time to update. Although this reg edit is relatively harmless, back up your device before doing so.
Click to expand...
Click to collapse
Thanks, this worked great, I have the date on my taskbar now, however when trying to alter the short date I have a problem. If I do this example given, "To change the Short Date Format to show "Mon/2" = ddd/d" then this works fine. What I actually want is to show the day and the month, i.e. for the 5th June, i'd like it to display 05/06. I've tried to do this but it displays as "05/m". Any ideas why this happens?
bumpety bump!
You need to use an uppercase M, not lowercase m.
m = minutes, which is invalid in the date field, so it just uses 'm'
M = month, which is valid in the date field, and so should show the date.
Note that if you want the leading zero, you'll need to use MM.
What device or ROM does the Tweaks thread cover?
My Cingular 8125 doesn't have the key described for changing the clock and/or date on the taskbar. :?
HKLM\Software\Microsoft\Shell has no "TBOpt" key on my 8125.
Anyone know where the tweak can be made on the 8125?
Thanks.
ZeBoxx said:
You need to use an uppercase M, not lowercase m.
m = minutes, which is invalid in the date field, so it just uses 'm'
M = month, which is valid in the date field, and so should show the date.
Note that if you want the leading zero, you'll need to use MM.
Click to expand...
Click to collapse
Result! Works a treat now, thanks
J-Mac said:
What device or ROM does the Tweaks thread cover?
My Cingular 8125 doesn't have the key described for changing the clock and/or date on the taskbar. :?
HKLM\Software\Microsoft\Shell has no "TBOpt" key on my 8125.
Anyone know where the tweak can be made on the 8125?
Thanks.
Click to expand...
Click to collapse
The key doesn't exist, you need to create it.
fuel925 said:
J-Mac said:
What device or ROM does the Tweaks thread cover?
My Cingular 8125 doesn't have the key described for changing the clock and/or date on the taskbar. :?
HKLM\Software\Microsoft\Shell has no "TBOpt" key on my 8125.
Anyone know where the tweak can be made on the 8125?
Thanks.
Click to expand...
Click to collapse
The key doesn't exist, you need to create it.
Click to expand...
Click to collapse
Cool - Thanks.
I had considered it, but without knowing, I didn't want to add a key.
No problem! Just post again if you have any trouble
I tried to do this per instructions but the final 6 (5/5/06) cuts off. I tried to change it to short date but it didnt work. I had to add the SSDte key but it deletes everytime i restart the phone.
Anyone have any idea how to fix this issue? It appears the date is being cut off...
That's the space reserved for the X/OK button covering the 6.
I don't know how to change the date in the taskbar to the short date format. That would probably help.
FreakinSyco said:
Anyone have any idea how to fix this issue? It appears the date is being cut off...
Click to expand...
Click to collapse
how about changin the separator[/] to [.] in date settings
J-Mac said:
That's the space reserved for the X/OK button covering the 6.
I don't know how to change the date in the taskbar to the short date format. That would probably help.
Click to expand...
Click to collapse
Ok.. now in short format with either M/d or M/dd I get some odd display. See attached.
Did you try leaving a pace or two after the date code?
J-Mac said:
Did you try leaving a space or two after the date code?
Click to expand...
Click to collapse
You sir, are the winner. Thanks a ton. It makes me very very happy to see the date right where I want it.
FreakinSyco said:
J-Mac said:
Did you try leaving a space or two after the date code?
Click to expand...
Click to collapse
You sir, are the winner. Thanks a ton. It makes me very very happy to see the date right where I want it.
Click to expand...
Click to collapse
Great!
Where was the registry key for changing the date, BTW? (Never get used to this WM5!!)
Never mind - add it, right?
I'm looking for keys that ain't there again!
Does this work on the AKU2 roms?
J-Mac said:
FreakinSyco said:
J-Mac said:
Did you try leaving a space or two after the date code?
Click to expand...
Click to collapse
You sir, are the winner. Thanks a ton. It makes me very very happy to see the date right where I want it.
Click to expand...
Click to collapse
Great!
Where was the registry key for changing the date, BTW? (Never get used to this WM5!!)
Never mind - add it, right?
I'm looking for keys that ain't there again!
Click to expand...
Click to collapse
I used RegistryWizard to get the date onto the taskbar. It does not have any formating options for the date... thus why im in this thread.
See here for RegistryWizard:
http://forum.xda-developers.com/viewtopic.php?t=39725
Some people are having issues with the latest version (including me) but the second most recent works fine to add the date.
Is there a way to change what the soft keys do? I know you can in normal WM 6.1 but I wanted to change the softkeys in TF3d. I definately want one of them to be device lock. The other I'd like to see if I can get it to turn bluetooth on/off.
If this isn't possible, is it possible to add those functions to the home screen?
yep.....here u go!
Try a search next time though, the first one is on me..
Virus alert!
band27 said:
yep.....here u go!
Try a search next time though, the first one is on me..
Click to expand...
Click to collapse
My Virus Protection Software, TrendMicro OfficeScan reports GenPac virues within that package!
Its in the regitry, HKLM/Software/HTC/Manila
HomeLSKPath & HomeLSkText > Left soft key
HomeRSKPath & HomeRSKText > Right soft key
mhaefele said:
My Virus Protection Software, TrendMicro OfficeScan reports GenPac virues within that package!
Click to expand...
Click to collapse
Try this one, it's clean
Thanks guys...
I tried search and came up with so many results I had a hard time narrowing it down to find anything. too much good stuff here that i could find what i was lookin for.
Thanks again!
mhaefele said:
My Virus Protection Software, TrendMicro OfficeScan reports GenPac virues within that package!
Click to expand...
Click to collapse
Interesting.....my antivirus tool didn't detect it.
Ok then.
As the titlequestion says, is it possible? I want my X1 to stay in landscapemode, AT ALL TIMES.
Registry, hack or impossible? All answers accepted
Um... I won't be of much help here, because I don't know how it was done, but i heard it was possible. So keep searching .
Start->Settings->System(Tab)->Screen->General(Tab) Screen Orientation Portrait/Landscape Dunno if permanent until you change it.
Yes, it's possible using mortscript. Then one would wonder, why would you want that?
Easy thing:
Get Schaps Advanced Config tool. Go to the setting where you can set the display orientation. Set 270 degrees to "True", 0, 90, 180 to "False".
The slideout will no longer rotate back to portrait now.
Keep in mind that other tools (AEButton, QuickMenu) can still rotate the screen if they want.
Angelusz said:
Yes, it's possible using mortscript. Then one would wonder, why would you want that?
Click to expand...
Click to collapse
Scenario: I type in an adress in Opera, and slide in the keyboard; - the phone changes orientation (to my irritation). I have several other scenarios that (certainly) only annoy me..
xperian said:
Easy thing:
Get Schaps Advanced Config tool. Go to the setting where you can set the display orientation. Set 270 degrees to "True", 0, 90, 180 to "False".
The slideout will no longer rotate back to portrait now.
Keep in mind that other tools (AEButton, QuickMenu) can still rotate the screen if they want.
Click to expand...
Click to collapse
Excellent! Thank you very much!
EDIT! Tried this, can't see those settings you refer to.
RMNZR said:
Excellent! Thank you very much!
EDIT! Tried this, can't see those settings you refer to.
Click to expand...
Click to collapse
SORRY so much! I had it all wrong. However, I found the solution on here:
http://forum.xda-developers.com/showpost.php?p=1506552&postcount=3 <--- seems like it's slow though.
http://forum.xda-developers.com/showpost.php?p=1587938&postcount=6 <--- I think thats better.
xperian said:
SORRY so much! I had it all wrong. However, I found the solution on here:
http://forum.xda-developers.com/showpost.php?p=1506552&postcount=3 <--- seems like it's slow though.
http://forum.xda-developers.com/showpost.php?p=1587938&postcount=6 <--- I think thats better.
Click to expand...
Click to collapse
You've been very helpful, and I thank you The ultimate would of course be to find a registrysetting that cancels the whole orientationchangethingy, but this will absolutely help.
... X1 is really a device for me. by now I have changed EVERYTHING to my liking, even this
And i want to add that you can asign a button to do that, i mean one of the to button in config, the soft button the ones that we used to hard reset phone...
Fulgore69 said:
And i want to add that you can asign a button to do that, i mean one of the to button in config, the soft button the ones that we used to hard reset phone...
Click to expand...
Click to collapse
Have done so. Doesn't work in for instance opera
when it should be "right soft key" just like the left soft key should be left soft key
any idea why this could be happening?
i always change it back but after a restart of the phone it always gets assigned back.
dont recall this happening before TF3D install though
comeradealexi said:
dont recall this happening before TF3D install though
Click to expand...
Click to collapse
and there's your answer! must be at least the 5th thread on this now...
artesea said:
and there's your answer! must be at least the 5th thread on this now...
Click to expand...
Click to collapse
really? - dam soz - there fix??
I removed TF3D and it worked again, now my right key is for soft reset =D
gundamboy said:
I removed TF3D and it worked again, now my right key is for soft reset =D
Click to expand...
Click to collapse
oh aye? i got the left one for the windows thing and the right one for change orentation - guess i gotta remove tf3d then lol
sure there is not a reg fix or something similar??
comeradealexi said:
sure there is not a reg fix or something similar??
Click to expand...
Click to collapse
Hi,
I also play with this problem a lot - for me it looks that this is a bug of TF3D.
Until reset this can be simple fixed by Settings > Buttons and then assignee Right Key to Right SoftKey. Unfortunately this change is gone after reset.
The same is for Registry edit - it is gone after reset.
Currently I am using AE Button Plus application - in there I assigned Right SoftKey to Right SoftKey - it works even after reset.
Hope this helps.
Hi all,
In the program tab, there are few items were locked, can not be removed. Anybody can enlight us how to unlock these items, I don't use that few items often, I'd rather change something using more often. Please refer to the screen captured. Thanks!
Second Part of my first post.... ahem.... only post..... ahem....
Hope this helps. I would backup the Registry/or those keys first incase you want to get them back if you delete them.
http://forum.xda-developers.com/showthread.php?t=517546
What is IDEAS BTW?
It's a bit of registry editing I'm afraid..... also have a look here...
http://forum.xda-developers.com/showthread.php?t=500381
M.
Also, can i just ask what battery icon is that? Does it work well on the D2?
Thanks
I just did this today.
HKLM/Software/HTC/Manila/ProgramLauncher/
The Reg Folders correspond to the shortcut location. 0 = first (Home) and so on.
Change "IsReadOnly" from 1 to 0
Hi,
and nobody knows how to go further then 19 applications?
i would had appreciated that HTC implemented , a customizable
multi-pages/tabs programs list, sliding from page 1 to 2 etc with a finger gesture.
19 is not enough for me and pi8 installation created at least 8 entries(task, calendar...) in the "standard" programs list , making me scrolling uselessly down
thanks
regards
craiglay said:
Also, can i just ask what battery icon is that? Does it work well on the D2?
Thanks
Click to expand...
Click to collapse
its the _FInixNOver(BatteryIconsOnly) cab.`
it works oke, but check this:
restart you phone put in your code-- look at the size of the pads of the numbers.
install the cab. restart then look again.
its a minor glitch !
HTC Touch Freak said:
Second Part of my first post.... ahem.... only post..... ahem....
Hope this helps. I would backup the Registry/or those keys first incase you want to get them back if you delete them.
http://forum.xda-developers.com/showthread.php?t=517546
What is IDEAS BTW?
Click to expand...
Click to collapse
THanks!
IDEAS is the program by Singapore Singtel's internet program in the SIM's card. Stupid program.
Sorry to be off topic but I did not understand:
its the _FInixNOver(BatteryIconsOnly) cab.`
it works oke, but check this:
restart you phone put in your code-- look at the size of the pads of the numbers.
install the cab. restart then look again
a] what code and what pads of the numbers.
I installed the cab then restarted ...not there
reinstalled [it deleted previous] restarted ...still not there.
Again many thanks
Haha.. Singtel sells HTC? I thought only starhub has the contract to sell it.... I bought mine from starhub
how to activate the Programs tab?
please, let me know how to activate the Programs tab? I don't have one, and there is no option to activate it in the Settings/Customize Tabs.
thank you
elmalote said:
I just did this today.
HKLM/Software/HTC/Manila/ProgramLauncher/
The Reg Folders correspond to the shortcut location. 0 = first (Home) and so on.
Change "IsReadOnly" from 1 to 0
Click to expand...
Click to collapse
Works
Change 0 1 2 3 perform a soft reset and you can re-arrange the start menu
Thanks Elmalote
What a great forum!
Hi Guys,
That's a great solution to ged rid of the useless tabs. Thanks a lot!
Is there a chance to put Folders/Directories in the Start Menu? This would be even better.
Before on my Kaiser I had MortButtons and for example a tab for Internet applications, one for games, one for tools, etc.
I miss this...
Regards,
JTGBDR
Alfredos said:
Works
Change 0 1 2 3 perform a soft reset and you can re-arrange the start menu
Thanks Elmalote
What a great forum!
Click to expand...
Click to collapse
UW glad to help
receand said:
please, let me know how to activate the Programs tab? I don't have one, and there is no option to activate it in the Settings/Customize Tabs.
thank you
Click to expand...
Click to collapse
Does Clicking on the Start button pull up the programs? That would be the programs tab. If you are looking for the programs tab on the bottom of TF3D well it is not there. You can do a reg edit to enable it down in the tabs but it does nothing. You cannot add, edit, or launch an app from it. Sorry.
In ProgramLauncher entry, you don't forget to add a dword totalItemCount and put the max value you want (for example 30 in decimal, for 30 icons on ProgramLauncher).
If you create 31 folders in the registry,the icon appears but you can't add the program, you need to increase the totalItemCount , 35 for example.
elmalote said:
I just did this today.
HKLM/Software/HTC/Manila/ProgramLauncher/
The Reg Folders correspond to the shortcut location. 0 = first (Home) and so on.
Change "IsReadOnly" from 1 to 0
Click to expand...
Click to collapse
Thanks pal! It works on my HTC D2 WM6.5!!