Related
hey all
i tried jimm98y's Vista Dialer and whenever i install it, i dont get the smartdial window.
can ANYBODY help with this.
or, point me in the direction of a dialer skin which incorporates a Smartdial function and is BLACK and has big buttons.
THANK YOU!
bump.bump.boom-p.
Bumpty Dumpty!
a little late I know...
but just seen this msg in teh archioves, have you tried in the phone dialer going menu/ Smart Dialing Options, and ensuring its enabled? Works ok for me int eh Vista dialer on WM5
Anthony
I installed the vibration feature on my Elf, when I uninstalled it. The keypad does not have the sound effect it used to have when I dial.
I tried the hacks from here : http://forum.xda-developers.com/showthread.php?t=257415&highlight=keypad+sound+elf
But it doesn't work for WM6. Please help!
Hey all I wanted to know if there is a program that will make my Wing vibrate slightly when I dial so I know I pressed the keys. I found this:
http://forum.xda-developers.com/showthread.php?t=269024
but is doesn't work on my wing. Any thoughts out there?
Doesn't works for my LG KS20 too, is there any software to do the same job for vibrating on key pressing like the LG Viewty?
did you set the keypad tone to short under phone settings?
I cannot install it... error message.
I adjusted the reg, its faster and simpler. Did you try that?
MM
MaxMotus said:
I adjusted the reg, its faster and simpler. Did you try that?
MM
Click to expand...
Click to collapse
why don't you just share with him the registry edit then? goodness...
Vibsrating Keys Cab
Here u go ..... just made a cab for it
Its lso included in one of my WM6 Roms
Thanks for the cab, i'm going to try it on my wm6 device.
i see 7 downloads..but no feedback yat..
feedback...;-)
thanks for the cab..i installed it on my tytn 2 and it works fine. there is one flaw (and i am almost sure it has nothing to do with what you did): you can press a key very lightly and produce a number without any vibration..i don't know if this can be prevented, but the problem is: you never have a 100% reliability that no vibe= no key pressed...
maybe its also related to ur touch screen pressures setting..
that sure makes sense...;-)
Have downloaded and used the vibrating keys cab on a 2003se BA. Great. No problems, and thanks!
cab only works intermittantly on a hermes/tytn/8525 device. uninstalled, and no longer get dtmf tones. dtmf is funtional, but i dont hear the tones when i press a number to dial. all i get is a singlr tone for most of the the keys, and another tone for a few of t e others. how do i restore the tones that were produced prior to this cab. Also, would someone share the reg edit that makes the phone vibe on digit press.
Works on Eten M700
Works great on my Eten Glofiish M700 with WM6
you have to make sure that under phone options, its set to short or long tones..if its set to off, you will not ave anything
Thanks for the great CAB
feedback KS20
hi, on my KS20 it works. well have to push the SW button for a while to have vibra-feedback. by fast typing no vibra. is there a poss to change 'vibra delay time' ? rgs thorsten
thorsten06 said:
hi, on my KS20 it works. well have to push the SW button for a while to have vibra-feedback. by fast typing no vibra. is there a poss to change 'vibra delay time' ? rgs thorsten
Click to expand...
Click to collapse
as u may have read on the previous post that its related to ur touch sensivity settings
Here is the Cab that will turnoff the vibrating key pad :
Installed on my htc p360 and it works fine
Thank you, , now , i'm sure to be alerted by any touching pad , as if the phone is in my pocket, and unlock .. ..
please help me.
im new with wm6.
i have a ks20 and dont know how to install this.
Hi people,
I have a problem with the phone canvas slider (not tachi phone canvas) with a WM6.5 (my own rom cooked)
When an incoming call happen, an incall popup appears few seconds and after the slider appears. I want to disable this pop up but how ?
I have a second problem : When lockscreen is activated, new sms are not notified (by a ring or vibrate) until the screen is turning on. And when an incoming call happen, it waste some seconds before the phone is ringing, how to short this delay ?
Thanks for your help and sorry for my english.
as far as i know HTC phone canvas doesn't work with WM6.5 for now because of that popup/lock screen issue. Best option for now is use the default dialer with a nice skin
personally i like the ryon dialer here: http://forum.xda-developers.com/showthread.php?t=508920
OR just don't lock your phone and use standby instead that way you should be able to use the HTC phone canvas + Slide to unlock
as for text messaging and notifications i have same issue where messages and notifications don't make any noise/vibrate until screen is turned on (usually phone is in standby and locked state)
so +1 if someone has a fix for this
thanks averma
For lockscreen, I removed the animation (the slide to unlock) with the cpr files. Now, it's like on WM6.1 with the WinMo locker but it works well with calls or sms.
For the dialer, I finded how to fix the issue when we scroll contacts in the dialer but this popup stay there.
I tried the tachi phone canvas but this popup appears just one time, quickly.
try this cab..i got it from ppc geeks..so no thanks to me just passing it along. Its seeming to work for most people though. I had the problem with a custom dialer, and the original WM incoming call notification bubble pops up. Worked for me...
Thanks tf2d I'll try that and I tell you if it works
it seems to work. Thank you very much tf2d and thanks to calkulin to find this reg tweak.
Hey, this cab should be on all 6.5 roms it's working with tachi dialer, and the ring delay seems to be better too;
bye bye popup
Thks Calculin, Averma and Faouzy to ask question
Yes ric69, I've spend so many times to find out the solution and it's only two reg entries.
Thanks again to all
Any word on how to fix the sms + notifications problem in the 6.5 lockscreen (other than using a different lock screen)?
ps thanks for cab and info on tachi dialer, works great
indeed thanks to caulkin..and your welcome
faouzy42 said:
thanks averma
For lockscreen, I removed the animation (the slide to unlock) with the cpr files. Now, it's like on WM6.1 with the WinMo locker but it works well with calls or sms.
For the dialer, I finded how to fix the issue when we scroll contacts in the dialer but this popup stay there.
I tried the tachi phone canvas but this popup appears just one time, quickly.
Click to expand...
Click to collapse
Hi, could you pls. tell how you fixed scroll contacts issue in the dialer ?
cheers,
rishi2504
tf2d said:
try this cab..i got it from ppc geeks..so no thanks to me just passing it along. Its seeming to work for most people though. I had the problem with a custom dialer, and the original WM incoming call notification bubble pops up. Worked for me...
Click to expand...
Click to collapse
This is just perfect to me and work like a charm! Thank you so much!
rishi2504 : with the phone canvas, you need to use patched cprog.exe and tpcutil.dll in order to fix the scrolling issue. Make a cab (with wince or cabarc) or replace it with total commander, resco explorer, ...
http://forum.xda-developers.com/attachment.php?attachmentid=213068&d=1249522428
faouzy42 said:
rishi2504 : with the phone canvas, you need to use patched cprog.exe and tpcutil.dll in order to fix the scrolling issue. Make a cab (with wince or cabarc) or replace it with total commander, resco explorer, ...
http://forum.xda-developers.com/attachment.php?attachmentid=213068&d=1249522428
Click to expand...
Click to collapse
Thanks for your response. Will check and get back ...
cheers,
rishi2504
I just need to get vibration on this calculator working, use to vibrate in stock rom.
please tell me the registry or a link a cab to get this working, cant stand making calculations with out vibrating.
Please someone help me with this.
Thanx in davance
[HKEY_LOCAL_MACHINE\Software\HTC\Calculator]
"Vibrate"=dword:00000001
"VibrateLevel"=dword:00000002
Hope it helps
Didnt work, dont know why and did enter the registries correct.