I have this problem its som popupp comming many times and it says stk-tjänst and it shows my provodername and the onlything you kan do is press oki.i want to disable it
do anyone know how to do this
i have telenor in sweden(Vodafone)
regards wikings1
Related
hi chaps,
i have come to you all begging on my knees to help me fix this darn phone. i have a imate JAMin on the vodacom network in south africa. when i originally started the phone and it started installing all those cab files i did what some people mentioned i should do and soft reset it for it to stop adding all that other junk. this i think is about where my problems started. i had no mms facility at all. no one in south africa seems to be able to help me and if they can i certainly havnt been told about it and ive spent ages tracking people down who might help...
my brother eventually led me here...
i am having serious issues with the phone at present. i cannot for some reason connect to GPRS - my settings are still the same as they were. and then this morning when i woke up the phone seems to be dialling and then hanging up and dialing and hanging up and dialing and hanging up. i think its almost as annoying as nails down a chalk board. i have tried to hard reset but it doesnt seem to want to?!
other than that i am a complete novice at this sort of stuff. i have no clue when it comes to extended roms and the like but i would likethis phone to work properly - eg make and recieve calls. use gprs so i can go online via it on my laptop. use skype. send recieve texts. the usual things. i dont need all the fancy shmancy stuff they load and also dont need all the other countries's operating software!!
where do i start so that i can at least use the phone, or reset it so that i can use it? i have looked at other threads but to be honest i dont understand a thing....
thanks in advance...
on my knees...
hey chaps, sorry, will give you some more info...
i cant seem to hard reset it either - i get to the stage where it asks me to press the send button, but when i press this nothing happens...
is there a prevelance for virus's on these phones? can they even get them through normal useage?
thanks chaps.
regards,
Christiaan
Start >> Settings >> System >> Clear Storage >> "1234" and hit left soft key
Hello/Moin,
I have an Wazard with a bad akku. I only use the Wizard for testing. The problem is, that I have made an firmware update with the bad akku. In the middle of the updating-prozess the akku was empty. Now I have an wizard, with ist starting the three color screen in an endless modus.
I have a laboratory power pack. I can set the voltage an the current. The WIZARD has six pins for akku. Which voltage has to be attached to which pin?
Greetimgs/Mfg
Snowyrain
The same Text on german: Hallo, ich habe meinen Wizard zerschossen. Beim wechseln der Firmware hat der Akku aufgegeben. Jtzt startet er immer wider diesen drei Farben screen. Wie kann ich den Wizard direkt an einem Netzteil betreiben? Welche Spannung muss an welchen Pins anliegen?
hi,
the voltage you'll need is 3.7 volts. And if you face the pda from the back, the upper pin is the positive and the last pin is the negative, so you don't need the pins between the first and the last.
I've also found a dead battery fix on the net. I'm with the same battery issue, but the fix won't help. Maybe it works for you?
There are two options, the first one can be found here: http://asktheadmin.wordpress.com/2007/06/20/htc-wizardcingular-8125-dead-battery-fix-errr-jumpstart-pt-1/
And the second option if you cant find a second battery: http://asktheadmin.wordpress.com/2007/06/22/htc-wizardcingular-8125-dead-battery-fix-errr-jumpstart-pt-2/
Oh, and if you know other ways to fix my pda, could you tell me how?
Good luck!
Jordy
Once my computer just up and turned off in the middle of a flash. After this it would only go into bootloader mode (RGB screen.) Good thing I ripped my original ROM with WST (Wizard Service Tool), as my piddly lil carrier doesn't have a official rom that I've found.
In my experience, if you can get bootloader and it says "USB" in the bottom left when connected, you can flash your original rom (or part of) to your phone with the no id version of RUU.
Although I haven't experienced the dead battery issue, I don't think the RGB would load in that case. However, pinouts.ru is the shiznit. Happy hunting.
Im kinda unsure what your problem is
Is it you cant access the boot loader to flash a new rom??
Or is it you dont have a battery??
Did ya try booting while holding the camera button with the stylus pressing the reset button?
also you can get a new battery for $10 at
http://www.batteries.com/productprofile.asp?appid=394544
the wizard repair manual might help too
hopefully i helped somewhat lol
@ SlimDan22: None of your 2 options.. His problem is that he flashed his rom and in the middle of the flashing process, his PDA turned off. Because he has a dead/bad bettery. So the only thing he has to do is charge his battery with the wallcharger to 100% (from 0% to 100% it takes 4 hours according to the ser vice manual). Then connect it to the pc and get the bootloader in USB mode. You can do that by holding the camera button and press the reset button with the stylus. Hold the camera button until the device restarts, then follow the on-screen steps (just press the send key, the green button)
Then the device is in USB mode and you can flash your PDA again
I've got nearly the same problem (exept the reboot in the middle of the flash process) so i've got to fix my battery issue.
This is what I'm doing now:
I'm testing my PDA with the htc battery diagnostic tool "PowerDetect". I've attached the tool if you want to use it
I also found the service manual at: ftp://xda:[email protected]/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf.
I've put back the original Rom temporary now (WM5, not WM6) maybe that was the problem but my battery issue started before I upgraded my PDA to the newest TNT software.
My prevous software was TNT 5.0, that's where the problem started (after a use of a couple of months..)
I hope I can fix my phone, because I've no warrenty anymore. It's second hand and i teard off the warrenty label..
We'll see if it works..
I've heard about many issues with the wizard but this is the most annoying one until now
Succes fixing your phone
Jordy
My problem is nearly solved
After some tests with multimeter and PowerDetect I found out that it was a bad battery problem. There were many options:
1. bad battery
2. corrupted chip on mainboard
3. bad contacts (oxidation on pins)
4. software bug
So it was #1, I don't need help anymore..
The website for a new battery wich SlimDan22 linked, was very cheap but only ships in UK and I'm living in the netherlands but I found a good website if you're living here: http://shop.strato.com/epages/61396109.sf/secoKSHUJAaOLc/?ObjectPath=/Shops/61396109/Products/PDA16010
It has many models of batteries but only ships in the netherlands so..
Jordy
PS. @snowyrain: would you tell me if it worked for you by just connect a powerpack to the pins? maybe i'll do that instead of buying a new battery..
hi folks!...
i need your help/opinion on my dopod 838 pro issue,.
my unit's touch screen is not working though i have already replaced it with a new one i assured that the connections are tightly connected it worked right after i had placed the new touch screen then after i assembled it completely it wont work unless i slide the querty pad a li'l then it will work,. i tried to calibrate the touch screen for more than 6 times already just to give me peace of mind that the touch screen will consistenly work but it only took 20to30mins then the touch screen is not working again..
right before i replaced the touch screen of my hermes its doing the same thing..
i dont know what to do...
also...
one odd weird thing happened..
just last night i was texting via sms then all of sudden my message icon suddenly disappear basicaly i can no longer find it nor can no longer send sms co'z the message application have gone missing..
i tried to look for it elsewhere that i think that it could be re-directed but i cant find no luck.. i end up doing a hard reset on my hermes but unfortunately i cant open my unit to check if the message app is still there
co'z my touch screen is not working i have to tap and make the screen work before my unit could load..
im still using a version 5..
have not upgraded mine to 6.1 yet.. though i love too.. like a.s.a.p
but i dont know how to yet..
can anyone help me on my issue?? will sure appreciate it...
thanks loads!....
issue
kabayan try mo hard reset ung fone mo or upgrade mo sa wm6.1 baka gumana n yan' pero unahin mo ung hard reset. kung ayaw mo munang mag upgrade.
upgrade
sa pag upgrade nmn just follow the instructions pero mag dl k lng ng mga firmware s herms section lng basta png herms or dopod 838 pro parehas lng yan isang design at model sa tawag lng nag kaka iba. sana nka tulong ako sau'
salamat/thanks!
salamat sa replies nyo!...
preciate it...
Hey all, working on a friends G1 (Yeaaa mine isnt the messed up one heh) anyways its odd.. sometimes it locks up. I mean I have even flashed restored it fresh etc. Sometimes when you plug the charger in it doesnt even act like anything happened. Sometimes need to take battery out and put back in a few times to get it to respond etc.
Now I am wondering, since right now it turns on fine etc.. could this be some sorta software botch up or is it hardware? Anyone else see issues like this where the G1 is unstable? Its not been dropped or water as well. Just trying to see notes before I tell him it has to be sent off. Thanks.
Mysticales said:
Hey all, working on a friends G1 (Yeaaa mine isnt the messed up one heh) anyways its odd.. sometimes it locks up. I mean I have even flashed restored it fresh etc. Sometimes when you plug the charger in it doesnt even act like anything happened. Sometimes need to take battery out and put back in a few times to get it to respond etc.
Now I am wondering, since right now it turns on fine etc.. could this be some sorta software botch up or is it hardware? Anyone else see issues like this where the G1 is unstable? Its not been dropped or water as well. Just trying to see notes before I tell him it has to be sent off. Thanks.
Click to expand...
Click to collapse
I'd restore to stock and see if it continues. If so, warranty exchange it.
Use the searc buttton.
I agree with GenericNode, just tell him to send it back. They will replace it for 10 dollars (Shipping charge). It's not worth the long term risks.
Question is, how long is the warrenty for? I dont know if it is or not, also I did restore to stock, never had this one modded.
und max, was ist mit dir? Du bist neu hier und nichts konstruktive zu sagen? Auch es ist "Search" geschrieben nicht "Searc" und ich kann hier suchen aber mein probleme ist was anderes. Ok?
Hi, can you help? my HD after almost 3 years which is a marvel that leaves me with a warning: Warnig! Battery Level Too Low. Will Your Device Shutdown! With this you would notice that? Load the battery but nothing to make lights for a while the orange LED goes out, I hold down the power and cyclically questto always alert. Change the battery but nothing new original HTC same problem. I riflesciato with button - volume and power, run the whole procedure, but nothing to do after hard reset the same problem. What should I do? To some, the same thing has happened? Through 1000 Help!
I am having the same problem was working fine untill a few days ago can't seem to find a solution. Tried new battery, no difference.
Same problem
two months with blackstone with same message i tried three batteries , trying to flashing other roms , really im thinking that this is a hardware problem and blackstone is dead
same problem.. anyone?
blackstone tot?
Mate90 said:
same problem.. anyone?
Click to expand...
Click to collapse
habe bisher nicht das problemmaber könnte einer der fachleute sich des themas annehmen??
http://media.xda-developers.com/images/icons/icon5.gif
please follow the forum rules and post in english only.
a safe way to determine, whether this actually is a software or hardware related issue, is to change the entire software.
therefor, you could format your sd card, perform a task 29, flash another rom and radio and see if it still happens. also, you must only flash your device, when the battery is fully charged, or you might throw off the calibration.