Loaded some MS Updates on my PC today and now, when the phone is connected to my PC, the phone keeps coming up with a 4 digit Password/PIN page.
Any ideas how I can turn this off. I vaguely remember something about Exchange Security policies after I loaded the updates. What have I done?????
It asks you for the password you've entered in "start -> settings -> lock"
yeah, thanks. found it. it was set to prompt every 0 minutes - which is an odd setting?
I'm having problems with this, on my voda branded v1605 the option to 'untick' password in Lock is greyed out?? Ideas?
Related
I've setup my VPN connection but it seems very hit or miss, more miss than hit...
I'm prompted for my UserID & Password and tick the box to save the password, the VPN connects great. It will connect maybe a couple of time after this, and then suddenly fail.
If I re enter my password it fails, but reentering my UserID & password will normal make it work again.
Am I doing something wrong, once setup I would expect it to not change or is this a common problem ?
I have exactly the same problem!
I usually have to restart the device to get it to work..or go into the vpn menu and tap and hold the vpn connection and choose "connect" to get in..
usually I have to restart though
I have tried everything but cant locate the problem point...it is just as u said..hit and miss!!
I have 2 devices (both qtek 9100) and both do the same thing...and on my universal I cant even get in at all....
do we have any solution to this problem??
After I successfully updated to the latest WM6 rom I can no longer connect to the internet on the cingular network. I have tried to reprogram all the connection information from another source on the internet but my browsers are not picking up the settings.
If anyone can shed some light on the situation I would be very grateful.
thank in advance.
Try applying this cab file to restore your settings. It should work for connecting through the wap.cingular APN.
Thanks for the quick reply I tried applying this cab file and installed very smoothly. Do I need to go to the connections settings and change something because it stil did not work.
I also have an issue with the sim manager, it will not start and I get a message that "phone is not ready please try in 15 minutes" have you encountered these problems when you upgraded?
thanks again!
I haven't had any problems after upgrading to any of the ROMs I've flashed. What you might want to do is set up a new connection using the isp.cingular APN. The username would be [email protected] and the password is CINGULAR1. Call it My ISP or REAL ISP, whatever you want. Then, go to Start>Settings>Connections>Connections>Advanced. Tap "Select Network" and choose the isp.cingular network as your default. Tap and hold on that network and choose "Connect". Can you now connect??
nevermind I didnt know I had to go to the connections setup and change it to MyISP, and now it works great.
I restarted the phone and the message that the "phone is not ready" went away but the problem comes back when I turn the wi-fi on and the phone goes on stand by. If I turn the phone back on I see that the wi-fi is disconnected and it has to reconnect everytime, and I also get the message (cannot execute\windows\nrdwakeup.exe).
Do You have any idea what could be happening.
thanks again
Hello everybody
I'm having a problem here after I installed the tf3d
every time i restart my X1, I need to go to the com manger, turn off the phone, then turn it on again, the phone then asks for the PIN, and everything after that is ok.
I even uninstalled the tf3d, but no good
any ideas?
Solved.
set the network selection to manual, choose the network, choose the the preferred network.
I also cancelled the "request PIN" at start up
Hi,
I am using the HD Mini with HTC Sense and Windows Mobile software.
I first used the wifi at work and entered their security key to get access to the internet without any problem.
When I got home I did the same, enter the security key number and got internet access.
I presumed that the device would save both sets of connection security keys, however when I went back to work the following day I had to enter the security key again.
The HD Mini does not seem to save the security key number. Nor does it save the home security key once I have typed in the office one.
Is there some way I can save both keys so it automatically connects up to the wifi?
Any apps that can do this on the Windows Mobile or HTC Sense system?
John
Hey, i doubt this is a common error as i am able to do this with no problem. After i type in the security code the first time the phone automatically signs me in. This is the case for using the wifi at my parent's house, my univerisity and the couple of friend's houses i have logged in at.
The thing with my university though is that the first time i had to manually establish a connection by going to adaptor and networks and then filling it my details. Whenever you fill in a security key it should automatically save the key for future access. However, your problem may actually not be the phone saving the key, it may be that the wifi source(your work) requires you to establish a new connection everytime, for security reasons.
Do some trial and error because as far as i know, i've never had difficulties with having to re-enter a security key.
Hi Kazmir,
Thanks for the suggestion. I entered the work wifi access manually, just as you suggested, and now it picks up each site automatically without having to re-enter the security keys.
Glad i could help.
So I just got my phone like two weeks ago. At my home I can connect to my wifi fine (it is secure but i don't remember what type). but when I am at work, I can connect to the visitor network which has no security, but sends you to a login page when you connect and makes you enter a password that they change daily. So being stuck using the visitor network would be a huge pain to have to go call it and get the password every day. We also have a staff network that is secured with 802.1xEAP and has MSCHAPV2 phase 2 verification. However whenever I try to connect to it, the little spinner spins for 3-5 min and then it says that my credentials are invalid. I have verified that both my username and password are 100% correct. I even went and spoke to one of the system admins and they pulled up the logs and can see that I did give the correct info and the system accepted me. They looked at my phone and tried to set the connection with EAP method = PEAP, Phase 2 authentication = MSCHAPV2, my username and password and it still failed. So that combined with the logs lead them to think something is wrong with the phone.
I have tried restarting the phone, trying with bluetooth on and off, turning mobile data off and and putting it in airplane mode while trying to connect (idk why this would help but some guide i found on google said it would), I have turned off the auto connect to hotspots and disabled smart switch. I have forgotten the network and re-added it, reset all network settings. None of this stuff worked.
The only thing I have not tried is a factory reset, but i would like to avoid doing this if at all possible.
I read somewhere that it is an issue with Android 6.1 but I also found articles saying samsung patched the issue so I am not sure what to believe. And in both cases i could not find any updates beyond the initial posts.
Anyone know what could be wrong and how to fix? Or, am I just left waiting for a software patch?
Is your phone rooted?
themissionimpossible said:
Is your phone rooted?
Click to expand...
Click to collapse
no it is not.
Its my first android (i have had an iphone 4 for last 4-5 years) so I am a little hesitant to root it.
No one else at your work has a problem with connecting to the wifi, with their phone? You can always check out their connection settings. Is your laptop and phone trying to use the same credentials?
AllHopeAbandon said:
They looked at my phone and tried to set the connection with EAP method = PEAP, Phase 2 authentication = MSCHAPV2, my username and password and it still failed. So that combined with the logs lead them to think something is wrong with the phone.
Click to expand...
Click to collapse
Were you given a CA certificate for PEAP with MSCHAPv2 to install on your phone?
themissionimpossible said:
Were you given a CA certificate for PEAP with MSCHAPv2 to install on your phone?
Click to expand...
Click to collapse
no I was not. My boss didnt have a certificate either, and also didn't use the MSCHAPv2 so I tried it without that and still no go.
AFAIK a CA certificate should be required for PEAP with MSCHAPv2 authentication, otherwise your credentials verification would fail (even if they are correct).
But I'm not so expert...
themissionimpossible said:
AFAIK a CA certificate should be required for PEAP with MSCHAPv2 authentication, otherwise your credentials verification would fail (even if they are correct).
But I'm not so expert...
Click to expand...
Click to collapse
Me either. Boss had no no secondary auth set and was able to connect. No such luck for me if i turn it off. Still gives same invalid credentials issue.