Can anyone tell me how to install tom tom on my xda minis. The install file is a SIS file how do i go about executing it?
Thanks
Tom
The tomtom installation is started through a windows setup program, i dont beleive there is a way to directly install a file right to the xda. I have tomtom installed on my 8125 and i had to install it off of the CD through a set up program
SIS is the install package for a Symbian device. So I guess you don't have quite what it takes.
TOMC107 said:
Can anyone tell me how to install tom tom on my xda minis.
Click to expand...
Click to collapse
RTFM?
Related
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
DID YOU GET ANY MAP ONTO ?
i'm trying too ...
caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Hallo,
It's not possible to install maps trough .cab files.
TT has to install map related lines in the .exe file, .doc file and in the reg.
So you have to install trough setup.
Succes, Hannes 8)
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
caprotti said:
I finally succeeded in installing tom tom 5.1 on the jasjar (htc universal) but when I try to install the cab file with Italy map the installation (made thru cab installer directly in the pda) goes wrongly (unsuccesful installation). has anyone some ideas ... ?
Click to expand...
Click to collapse
Can you please tell me how you managed to get TomTOm installed? I get the error message every time: Tomtom was unsuccessfully installed.
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
caprotti said:
carphead said:
Use a card reader.
Or you could install the maps to a local folder on the PC and then copy the directory over via activesync.
Click to expand...
Click to collapse
Ok I installed Italy maps but now the program asks for an activation process. Even giving the code embedded in the map, the activation on the tom tom site doesn't work...
Click to expand...
Click to collapse
can you give us a step by step process. and what versions of TT have you used ?
I installed tom tom 5.1 copying .cab files in the jasjar, then I copied the italy_plus folder in the jasjar and the program acknowledges the map ... but it asks for the activation code, saying that i must insert the disposal code (shown by the program) in a tom tom site mask. I tried but the site says that the disposal code is wrong.
I Got my TT5 working on the K-Jam! (Partially) This is what I did:
1 - TT5 did not istall properly over active sync - So I installed all of the CAB filed to my Storage Card and installed directly on the divice (I belive there are 4 files + get 1 voice file by searching the CD) I belive some the files are named ttn, GPS, etc)
2 - I emailed TomTom support and sent them a copy of my card so they can allow me to Re-activate my account (Belive they needed a copy of the card/cd, invoice of purchase and device invoice -- u can scan them , attached them, to a word file and email it to them). My code originally activated for my JAM (diff device code).
3 - I used the TomTom Map software to install the map to my PC. Then I copied the folder to my devices card via active sync
4 - when I started the TT5 -- it asked me for the activation code (which I got through ttcode.com)
5 - I activate the GPS control panel on Windows 5.0 (instructions I found on this site)
That is as far as I have gotten -- I am trying to figure out how to LINK the GPS to the K-Jam -- TomTom only lists a few coms open, but not one that the Blue Tooth lists.
Once I Figure it out -- I will post again!
Email me if you have any questions.
Hoped this helped!
In total you have to copy 4 files
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp
\TomTom\TomTom\data05.chk
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO
check www.htcclub.net for the soultion for installing TT5 and make it work ! :roll:
I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!
The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps
Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.
just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem
Hi
Does anybody have any information on installing and getting tom tom navigator to work on my t-mobile mda vario.
Cheers
Edd
Yeah...buy the CD, insert the CD in the drive, install the software, soft reset the device and start TomTom via the shortcut that is created during the installation
Sorry for that: what exactly is the problem you are experiencing? Of you provide some more information, I can be of more help.
Regards,
--Marc
you will only be able to run tomtom 5.21 on WM2005 (unless it will "work" but no bluetooth connection on com6/7 possible) use the .cab installation files...
gps.cab / PIMAddIn.cab / ttn.cab / wzd.cab
http://www.tomtom.com/updates/navupd521.zip
1. Extract files in a folder
2. Run setup.exe
3. Do not close set up
4. Go back to the folder installation and get .cab files
Hope it will help
The main problem i faced was that i was using active sync to copy the cabs over ... use a cardreader and its cool ...
hi new to this i have a compaq ipaq 3760 with a bluetooth sleeve and a 1 gig card i did have tt5 working but thought i would upgrade to 6 followed all installing instructions but when i press on today screen i get this message
cannot find tomtom navigator{or one of its components}make sure the path and filename are correct and all the requied libraries are available.
no i have tried to reinstall several time and get same and i cant go back to tt5 as cant find the files anywere be much appreciated if anyone could help thank you bob
Probably it is pointing at a wrong path. Just to double check, try starting your Tomtom on your "Program Files" see if it works if you start with via other means.
getting same message m8t
has anyone got tt5 for ppc ipaq compaq as had that working once lol
can i install tom tom 6 on my ppc . my processor:arm sa1110 . also my memory is 31.15 MB.
Could someone tell me where do I download the Garmin S/W to install on my x1. I have checked the thread on this forum and I have located the following file "GarminMobileXTforWidnow Mobille_500100w". However when I try to install it, I get this file is not a valid PC application.
What am I doing wrong? Did I miss any steps or need more files?
Thanks.
You need MobileXT version and not Windows Mobile! try to find the following file "GarminMobileXTFullImage_4xxxx.exe"
Download latest Garmin Mobile XT for PPC (5.00.20w)
http://www8.garmin.com/support/agree.jsp?id=3389
Install it on your X1. Then download language and voice file and install it.
http://www8.garmin.com/support/download_details.jsp?id=3493
Base map:
http://www8.garmin.com/support/download_details.jsp?id=3645
Regards,
Damijan
i did that but it never connects to the Built-in GPS in my Xperia ?
You must have correct unlock code in order to use Garmin XT on PPC. Buy navigation software from Garmin or use Google to find workaround.
Thank You. It worked for me. I now have to get the detailed US map installed.
Garmin Detailed US Map
I need help getting detailed US map?
Thanx its work like a charm
Yeah is the same for me the status of GPS never reponse, but anyway is connected just check in view map... wait 1 min, and then rock it