How can I flash to WM2003 with bootloader 5.22. Other than the diagnostics menu, all I see (when hitting contacts) is:
CE ROM to SD
BOOT to SD
CE+BOOT to SD
GSM ROM to SD
CE+GSM to SD
Thanks in advance...
You need first to use an sd card and a card reader/writer, using the tools available on the forum you program the card with the rom image, you then place this in your xda, push power while using stylus to push in the hole on base of xda, the system will recognise the rom and ask you would you like to program the rom. Its a good idea to use that bootloader section that you are in to backup your existing rom first, ce to sd.
Thanks for the reply. I've done all that you said, but the bootloader just comes to a bootloader screen with the version and nothing else. It never asks me to do anything with the ROM. When I hit the contacts button, like in earlier versions of bootloader, there is no menu option to restore from SD.
there is no option for that, it does this automatically if you instert an sd card with the os image in the right format.
OSImageTool can create such an sd card for you.
I'm not sure what I have done wrong in creating the image then. I used xdatool with NK.nbf as the source and NK.nb1 on an SD card in a card reader as the destination. It creates fine, and when I enter the boot loader on my SX56, it goes from WAIT to GSM OK and then sits.
it does not matter what is on the sd-card before you write the os image on it using xdatools. the old data on the card is overwritten.
if you insert the card with the osimage on it in your xda, it should complain that the card is not formatted, if it says this it is ok, it just means that windows ce does not see a FAT filesystem on the card.
( so don't answer 'yes' to that question )
if you then boot into bootloader mode, you should get the question if you want to flash your rom.
I don't get the question to flash my rom. Please, what am I missing???
XDAtools:
Browse to NK.nbf as the source
Browse to NK.nb1 on SD reader as the destination
Boot with SD card into Wallaby
Screen goes from WAIT to GSM OK.
Nothing else.
I can see a file NK.nb1 on the card when I look at it in the card reader.
Do not use browse, use the drop down box in destination, choose sd card, then it will work, when you insert the card to your xda it will ask to format it, reply no and enter bootloader mode as you did before.
There is something about this bootloader that does not allow this or this option is disabled. I hvae the same problem and have flashed amny times on other bootloader version. I have a device with bootloader 5 and the same sd card flash that would not work on the bootloader 5.22 works on 5.15! So I don't have any idea. Something new form HTC :shock: I guess.
I can see a file NK.nb1 on the card when I look at it in the card reader.
Click to expand...
Click to collapse
this is wrong
a sd card with the os image on it should appear as 'unformatted' or unreadable to either windows or windows ce.
you have to select sd card device from the dropdown menu.
such that the destination says something like
J: 123M USB Storage MMC[/quote]
Once I did this but I can't remember how. I want to take my mini sd and put it in my phone then boot to bootloader and have it copy the os / rom / dump to the sd card. Then I can use the bootloader to recover from the SD card.
How do I do this?
Take a look to this: http://forum.xda-developers.com/showthread.php?t=305294
Good day
i had working Dual boot OS with WP7 and android for the last 2 weeks on my HTC HD2 with 32Gb SanDisk MicroSD.
yesterday i wanted to make a new installation with other versions on the OS. So...
i formatted the SD card to New FAT32 and the PC recognize it well.
I went to install WP7 from there :
http://forum.xda-developers.com/showthread.php?t=1236027
and after the installation the phone reboot and i did again hard reset for it to build up the partitions on the SD.
after the second boot the phone got stuck and i had to take the battery out in i wanted to start all over from the beginning.
when i went to format the SD again my Windows didn't find it nothing i did.
i i used all the partition application i know but nothing - no SD or dead sd.
i also installed Gparted and boot from the live cd but still no SD.
i installed original WM 6.5 - buy fuss what - still no SD installed.
i don't know what to do??????
i installed also android on hand and tried to format from the android but still - no SD installed.
is there some magic i can do?
or my SD is dead?
i hope i can fix it......
thanks
your SD card is locked.... BTTF lock card and that card not readable.... you must unlock card first... send unlock cab file to phone and after that you can format card (or use old Nokia phone http://forum.xda-developers.com/showthread.php?t=1242071)
if you want dual boot without worry about locking card, try use Pdaimatejam Rom or DFT UltraFruit
also you have video how to dual boot android and WP7 http://forum.xda-developers.com/showthread.php?t=1356833
Hi
you have to use "ultimate boot cd", boot on, find your sd card and format
hope this help
Thanks
cannot read sd card
dxdy said:
your SD card is locked.... BTTF lock card and that card not readable.... you must unlock card first... send unlock cab file to phone and after that you can format card (or use old Nokia phone http://forum.xda-developers.com/showthread.php?t=1242071)
if you want dual boot without worry about locking card, try use Pdaimatejam Rom or DFT UltraFruit
I installed pdaimatejam rom v7.1, cannot read sd card. Already send cab lock and unlocked cab both with hard reset.Easeus partition, pc and sdfomatter still cannot read. Phone and zune can read my card. What gone wrong any idea?
Click to expand...
Click to collapse
Question:
I want my SD card back to it's normal use. How do I format it? When I use bootloader Magdlr, I choose USB Mass Storage, my PC just alerted tone but not detecting my card.
Pls. help. Thanks.
I already use SDFormatter 3.0, but it wouldn't detect my card.
if card locked by Yuki ROM, unlock card with Yuki ROM + sending unlock cab
or format card with old Nokia phone
http://forum.xda-developers.com/showthread.php?t=1250869
http://forum.xda-developers.com/showthread.php?t=1242071
if card not locked, buy new card...
So apparently, it is possible to boot an GS3/GS4 directly from an external SD card, if you have a valid ARM-arch kernel written to the card.
The question is:
Would it be possible to boot a custom recovery plus ROM from the external SD card for GS4 Verizon/ATT users, whose internal bootloaders are locked down?
This would require getting a blank SD card and writing a suitable ARM kernel to the card using an appropriate utility (Linux dd for example).
Any ideas?