I have Himalya PDA (Pocket PC) and IT got a problem.When it Starts Ishows messege....Connecting Host....115200 and so on And IT Appears again and Again >I hard Reset my Device but the Ptoblem is still Present Do u guys have any Idea to Remove this ........Thanks :shock: :shock: :shock: :shock:
Please post this in the appropriate place.
Moved the topic
Related
Hello all,
I have upgraded my Qtek 1010 form its original Rom lvl to T-Mobile 4.00.21 Eng,
I had couple of problems with this Upgrade, so I decided to fallback the changes but whenever I run PROGRAMM A I got the following msg in the DOS session:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host.
error getting connectiontype
I don't know where the problem is!!!!
Please help me to move on.
Thanks in advanced.
Best regards,
John. :roll:
Hi ..
if you took the time to read through this forum before upgrading you should have found that by upgrading to either 4.00.16 or 4.00.21 you have no way to change the ROM except using the SD card method.
Thank you for fast response,
Could you please point me to the right document/Procedure to prepair the ROM on SD and boot from there.
...
John
I managed to download the ROM to SD Hardrest the device, but which ACTION key should I press to accepts the Load from SD?
I've pressed "Power button" and got 4 colors screen "Whit, Red, Green, and Blue" with the title WALLABY Bootloader V5.15 and at the bottom GSM OK......
Guys What should I do? Wait.... Reset.....
I've been waitting more than 5 mints and nothing chane!!!!!!!
Please help.
Thanks to you all. :shock:
The "Action" key is activated by pressing the middle of the 4-way joypad switch.
Ohhhhhhh,
No I'm Back to xda-developers.com ROM Image......
Thank you all for your support.
I'm so glade to join such a forum.
Again Thank you all.
:lol:
my xda mini isn;t booting o starting up, im gettin continues beep..pls guys tell me wat to do!!!!!!!!!!!!!!!!!!!!! :?:
Try it again
http://forum.xda-developers.com/viewtopic.php?t=29266
still da same...same continues beep even wen i connect it to da adaptor...ne other solutions????? :roll:
I pulling at straws here but is the battery charged? I had that problem with a palm once.
ya battery is charged..i duno wats going on here dude.. :?:
how about just hardreseting it??
buzz
did all resets i can do..nothin workin here
My iMate JAM was going perfectly fine, it also had the latest WWE ROM, no issues. Now for some reason, I download from www.pocketgear.com and install the trial version of "Pocket Mechanic" which also installs "Pocket Hack Master 2005". While trying out Pocket Mechanic, I use something called "registry cleaner" which is supposed to cleanup any incorrect/unused registry entries. After this I try "Pocket Hack Master 2005" which is a software to test the CPU speeds. As soon as I run this program, the screen freezes and my phone is dead. I try and reboot the device, but it is stuck at the blue boot-up screen. I am unsure whether my PPC died because of registry cleanup or because of "Pocket Hack Master 2005" software.
Anyways, now, I decide to re-install the WWE 1.12 ROM and start using the device. But, no luck, on the PPC - the blue boot-up screen does not go away and on the installer screen - "Checking information on your device... Please wait...." and is stuck.
I think the device is not booting up and hence is being not recognised by the PC as a USB device.
Please help... I am dead...!!!! Any safe boot options, anything at all?
At least ur gettin sumthin on ur ppc...b happy ranjanrishi...nothin on mine..just da continues beep :roll: if u found a solution plz share it wid me....thanx in advance dude..
check in the "upgrading" section of the Magician forum, there might be more answers there.
My XDA Atom always goto Update Utility mode when battery attached, rom update OK but can not solve pb!!! Can not reset it too!
Who can help me out of this pb??
B.R.
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
I had this problem for a while. I know you said that the update seemed to work ok, but I had the problem because the update did not work ok. It wasn't until I managed to find a PC that would complete the ROM update that the Atom was no longer in update utility mode.
Seem no ones met thí problem yet? I was try with mtty1[1][1].42 for change some data, but alway get error: usb tranfer fail! Also try with self test, result: ram test fail, eeprom write fail!!!
Have any body have a solution??
B.R.
HI
I got problems with ActiveSync too. All time I connect my
MDA is only "reciving data" for ages. I do all steps that U
recommended and still same - no change. I reinstal ActiveSync
100 times and do hard reset - no change - anyone can help me?
I got MDA pro from Tmobile UK with newest ROM
Sry should be in other topic - by mistake make new
People,
For a start - i am a fresh newbie and dot have any experience at all in ROMS.
I have read all threads on this tree but decided to do it anyway - just for the fun and experience...
I DIDN'T succeeded on upgrading my jam to wm6 but maybe you will be able to tell me why.
I have download a JasJAR wm6 update and started to play with it a little.
For a start , i have put the Last 113 update(MA_TMNL_11300_132_11200_Ship) and the new wm6 Nk.nbf file together in the same folder - and started the NOid upgrade, for my (very hough )surprise - the upgrade process went exactly like from 112 to 113 meaning all 3 stages from 113 to 2.25 - my heart pumped up for about 30 min until the upgrade completed(64M) - after that all i got is the USB\Serial boot loader.
Is this a stage someone have reached?
If the image could uploaded but couldn't boot - can this be fixed via hack ?
PS - all this started when i wanted the new SPB shell application since it is a very cool looking but works only on WM5...
Thanks
Roy
That's realy interestig... =) Did you tried to upgrade to WM5?
Nope - i didn't reach this stage in WM5....
this thing started when i download the WM6 from mininova...wanted to play with it a little bit.
i tried the original ROMUpgradeUt.exe and it gave me a JAS JAR picture with model number - then i tried the NOid.exe and it gave me a Magician picture with its model number!!! -from there the road was short to try what i did in the above..
what link of file you've been downloaded?
http://www.mininova.org/tor/633101
...for O2 Xda Exec [HTC Universal]
pickiki said:
http://www.mininova.org/tor/633101
Click to expand...
Click to collapse
Have you read Comments....?
http://www.mininova.org/com/633101
same problem sort of
ive got the same phone and when i tried upgrading to wm5 i incountered the same problem, it now wont do anything no matter what i do soft reset, hard reset, take the battery out for an hour. it is stuck in a boot loader screen so i think it might be salageable. but cant find original 2003 windows ver. and cant get it to connect with activesync. although when i do connect it, i do get a connection via usb and get the sound confirmation and pop up. if anyone could help or give me any suggestions it would be great.
Hello!!! =) I've tryed to upgrade to WM6...=) So now it's a brick.. -) I've bootloader screen with word "Serial" and i can't get usb connection.. -(
If someone know how i can resurrect it? =)
=)... 2 hors later it came back! IT'S ALIVE!!! =)
No.. it was jast glitch... -( When i connect my mda to PC and make reset, it shows Usb, but when i disconnect my device, it still shows usb... -(
*lol*
Your "english" just reveals that you're unable to comprehend what has been written so many times before. It's a shame.
Well if it’s any constellation at least you can use your phone to hold down important papers on a desk.
! why are you putting a JASJAR rom on a JAM?
Of course you'l brick it!
And there is NO WM5 OR WM6 COMING EVER FOR THE MAGICIAN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
go and flash the original ROM and never come back on XDAdev
omg im laughing so hard i can hardly post.
st3v3 said:
omg im laughing so hard i can hardly post.
Click to expand...
Click to collapse
Same with me (except for these few words)