Hello All,
I have a little problem when resting the devices, first I upgraded to 2.17 custom rom, and now when I do a soft reset on the windows mobile blue screen the backlight goes out and if I dont bring it back the device just hangs, its not a big deal but when I reset it and put it in my pocket with out looking at it I think the device is on but its not. ANyone else seen that ?
Related
I tried installing spb pocket plus and, just after it installed, my Wizard didn't seem to be responding so I tried soft resetting it. On booting up it showed the O2 splash screen and then the Windows Mobile screen but nothing else. The screen goes dark as the backlight is turned off but you can still see the Windows Mobile screen showing. Each time I soft reset the same thing happens.
I've tried soft resetting about 4-5 times now and the same thing happens again. I've even taken the battery out and put it back in and the same thing happens. I was going to try reinstalling the O2 XDA firmware but as I can't get the Wizard to connect to ActiveSync I can't do that.
Has anyone got any ideas? At the moment I'm without my phone & all the PDA functions on the phone and I really want it back.
Thanks for any advice.
Matthew
Think you may need to do a hard reset to put it back to it's factory state. Should work then.
Thanks, I'd been trying to do a hard reset but it didn't seem to work - then it occurred to me that I was actually pressing the wrong button to confirm the reset!
Hard reset works and gets it up and running again although, from checking, it seems that there's some problem between sdp pocket plus (3.0.0.3888) as I've now installed that about 3-4 times and each time, after doing a soft reset, the Wizard crashes and won't respond.
HELP NEEDED!
Yesterday I bought a Hermes (Vodafone 1605).
Everything was fine, I installed Opera and tried the wi-fi.
Then it locked and there was non way for turning it off. So I made a soft reset and I found out it hangs on the vodafone splash screen.
I tried a hard reset and nothing changed.
I can see some codes in the lower part of the screen as it tries to boot up but nothing happens.
I looked up some threads and tried to remove the battery for 20 mins.
It actually went over the vodafone splash screen but only to halt on the windows mobile one.
The thing that puzzles me is that I didn't mess at all with the ROMS!!!
It's exactly as it comes from the box.
Any advice and help is more than welcome....
Thx in advance
A few more details
I've been trying to get my Hermes working.
That's what I found:
Taking away the battery for some mins and hard resetting brings me to the windows mobile screen then it hangs
The same procedure but soft resetting instead of pressing space actually let the phone start but then it hangs on the screen: "Tap the screen to configure ...." etc. etc.
Still trying to figure out what's happening.
Anyone with some ideas please help me. I don't want to play with the ROMS till it's strictly NECESSARY. I can't understand why it's stopped working.
Now it works...
Repeated the procedure, soft resetting instead of pressing space.
It went smoothly and run all the Vodafone customization programs.
Now it's off and charging.
Don't know yet what was the problem. Hope it's not a problem of stability.
I'm starting blaming myself for leaving my old Tungsten.
Does anyone experienced something similar? May depend on some particular operation?
Curious, but Hermes sometimes needs to settle down. Suggest you try the following to avoid hangs/freezes as well:
http://forum.xda-developers.com/showpost.php?p=1078848&postcount=2
Mike
I think it's the well known freeze problem...
My Hermes worked fine for a while. Then I synced it and installed Magic Button. Everything looked perfect. I left it for a while and when I came back it was off and it won't go back on. Soft resetting just causes a freeze on startup.
I guess it's some problem with activesync. I tried the fake server but I'm not sure I didi it properly. I'll try again once I wake my Hermes back up.
Hope to solve this, otherwise it's almost unusable.
It keeps freezing...
I'm getting really worried.
After some hours of normal use I experienced the "won't wake up" problem.
The strange thing is that soft reset doesn't solve the problem. Neither does the hard reset.
When I tried to soft reset it went to the bootloader page.
I need to remove the battery for about 20 mins and try a hard reset.
Sometimes it works with space reboot, sometimes it need the soft reset restart.
Then it freeze after some time.
When it doesn't work it freeze on the vodafone splash screen after showing the version numbers at the bottom of the screen.
I'm quite puzzled.
It's a brand new V1605 with S/N HT645.
Maybe that's more than an issue on it.
Any chance to improve this with a ROM upgrade?
As your device is brand new with the its original ROM, I would take it back to the store you purchased it and ask for a replacement.
They should swap it for you right away.
Not so easy..
I'd like but I bought it from ebay.
It's a brand new Vodafone UK VPA1605, but i don't think I'm eligible for any assitance (even paying) here in Italy, even if Vodafone Italy sells the same PDA.
Now I'm not even able to start it. It keeps freezing on the vodafone splash screen.
I tried several hard and soft reset (even removing the battery for 1/2 hour or so). What I cannot understand is why it's so unpredictable? It's electronics.
It should just work or doesn't work, till you change something (software or hardware).
Dear All,
I have Kjam with WM6.0 Faria Crossbow, and i am facing a big problem. The back light is always on and on a brightness level higher than 100% i.e. It is as bright as when you reset the device for th frist 10 sec. I made a hard reset and it didn't solve the problem then i downloaded the phone alarm software and i set the back light to 50% and it didn't solve the problem too. I installed WM TNT 3.0 and also the problem didn't sevled yet.
Please can any body help me
Sounds like it's a hardware issue if you've tried doing a hard reset and changing roms and it's still happening. If it's still under warranty you might want to return it.
hi guys, this might seem to be posted a lot of times but i havent found anyone who experienced the same problem as me. ive flashed a custom rom (not found in xda dev) and the phone went well for 3 weeks to a month.however, today(lunchtime) i had a problem i soft reset my device and i was stuck at the 2nd splashed screen. i dont think my hermes is bricked because i can do anything a normal hermes do before. (pda function, calls, sms) really no problem at all until today. ive done what the wiki said like
Problem 2: stuck on windows mobile screen
Try to soft reset with stylus and wait 5 minutes on the windows mobile screen to see if OS boots
If all you get is same windows mobile screen, remove the battery for some time (about 20 min should be enough) and put it again.
Again, if all you get is same windows mobile screen do a hard reset.
If doesn't solve the problem do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset with stylus when the device asks you to press spacebar.
Check if you might have the NO GSM Problem
well i cant go pass the 2nd splash screen so what i did was hard reset it. and problems gone. my concern is ive lost a lot of documents because of what happened. so i just wanna ask you guys what could be the problem and the solution to prevent this from happening again.
much respect to all here!
TIA
What do you do just before the problem occur?
best thing to do is hard reset you phone this will reinstall you OS and resolve the problem. You need to old the 2 top soft key and press the reset but with your stylus. This will then bring then take u into the hard reset mode. follow the prompts on ur screen by using your keyboard .
This will work as i have experienced the same problem
kind regards
Ash
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
hi guys
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
ive done both of this in my ppc. hehehe
@sir mikechannon
yeah that was my badd. havent done bckup and all. hehehe
@sir ghz
hmmm nuthin, just the usual... havent installed anything prior to the problem.
well guys... thanx for the comments my ppc doing good now, i just hope it wont happen again. hehehe. much respect!
I have an Xperia X1 fully security and country unlocked and no hardspl running on it but it seems if i press the soft reset button under the battery cover, instead of the phone restarting, it stays running but the screen goes black but stays lit up. anyone else ever had this problem?
Anyone? or am I the only one?
it takes some time to reset w8 at the black screen for a minute
but if its not working u should try reflash it with a diff rom
Ive tried flashing different rom, it was originally o2 branded R2A and it was the same then, flashed to generic_uk R3A and still the same. I used to own an xperia x1 before and whenever I pressed the soft reset button, it reset straight away. This phone however is not resetting at all. Screen just goes black and backlight stays lit. Please anyone help me! Im frustrated now!
well I must say, I may be new here but im not new to windows mobile, disappointed that only one person managed to respond to my question. thanks goes to you souljaboy.
Turns out is is a hardware fault according to SE but thanks for nothing everyone!