Related
cld anyone plz help me in connecting xda exec to WiFi. I have Netgear : DG834G and the router configrations are shown in the picture
under > CONFIGURE WIRELESS NETWORKS
i can see the available network named NETGEAR ----- which is the name of my wireless router,but it keeps displaying connecting/available only.
if there is any step by step instructions in the forum plz give me the link
many thanks
Check you've got the following settings in "Configure Wireless Network" on your Exec:
General tab:
Network name: NETGEAR
Connects to: The Internet
Network key tab:
Authentication: WPA-PSK
Data Encryption: TKIP
Network key: [whatever it is]
Also, make sure your WiFi network adaptor in your Exec is configured for static or dynamic IP, whatever your network router is set up for.
On this site i found a possible sollution for a WiFi network tool for you PPC
http://www.cirond.com/pocketwinc.php
[/url]
On this site i found a possible sollution for a WiFi network tool for you PPC
http://www.cirond.com/pocketwinc.php
Don't forget to reset your access point. Sometimes a simple reset takes care of the connection problem.
WizzarD-me said:
On this site i found a possible sollution for a WiFi network tool for you PPC
http://www.cirond.com/pocketwinc.php
Click to expand...
Click to collapse
Does it work on the HTC Universal?
Yes the software is written for PPC. And the screenshots are windows 2003.
It should work on HTC Universal. I'm testing the software now. (only 9 Euro's) It should create more overview when configuring the WiFi network.
Benefits of pocketWinc:
Get Connected Fast
One Touch Web Browsing
Manage Connection Lists
Wireless Troubleshooting Tools
Check for Internet Connections
View Access Point Status
(all rights reserved)
for more info click on the link.
http://www.cirond.com/pocketwinc.php
Sorry guys
I tried the software but it doesn't support Qtek Universal.
The tool doesn't recognize the wifi adapter. Note that i did turn it on.
I hope they will support the Universal soon!
WizzarD-me said:
Sorry guys
I tried the software but it doesn't support Qtek Universal.
The tool doesn't recognize the wifi adapter. Note that i did turn it on.
I hope they will support the Universal soon!
Click to expand...
Click to collapse
Hi WizzarD-me,
If you are looking for a WiFi scanner. Try WiFiFoFum, it works great on the Universal.
http://www.aspecto-software.com/Forum/viewtopic.php?t=311&postdays=0&postorder=asc&start=30
Refer to mine, I have the Netgear router using a jasjar.
I dont use the WPA-SPK, I use the 64bit WEP encryption, and have provided the settings on my router and on my JJ, hope they help.
If you need further help directly PM me and we can use messenger by my screen shots should be self explanatory.
If you dont mind, could you let me know when you have connected and retrieved so that I can make appropriate edits to this post.
Attachments deleted subsequently....
cktlcmd said:
WizzarD-me said:
Sorry guys
I tried the software but it doesn't support Qtek Universal.
The tool doesn't recognize the wifi adapter. Note that i did turn it on.
I hope they will support the Universal soon!
Click to expand...
Click to collapse
Hi WizzarD-me,
If you are looking for a WiFi scanner. Try WiFiFoFum, it works great on the Universal.
http://www.aspecto-software.com/Forum/viewtopic.php?t=311&postdays=0&postorder=asc&start=30
Click to expand...
Click to collapse
Update
I was thinking. Since the option for connecting to the internet automaticaly does not indicate a WiFi connection... the PocketWinc program didn't find the WiFi cause i had my phone connection online.
After closing the program and turning of the phone connection and enabling the WiFi connection the program recognized the WiFi antenna.
Still experimenting with it at home. It has a Wifi Sniffer option in which you can set a WiFi sniffer interval. The program remembers the networks and you can set you favorites and even remember the settings on those.
The reason i set this program on this post was and still is for the overview of settings the program provides. You can sellect the network SSID and create a report of the IP configuration. There are several other interesting options like ping, trace route and more.
PS thanks for the link. I will check the WIFOFUM thingy
If anyone has the time could they help
I need someone to talk me through wifi..
I have xda exec but cant seem to get connected via access point..
I have installed the above software and wififofum. but nothing
Please help
router to have;
- ssid created, suggest a family name or similar, broadcast it
- dhcp enabled and auto control
- enable wep encryption (128 or 64 bit)
- use a shared key 9usually a choice of 4, pick one)
universal needs:
- wifi turned on!
_ start - settings - connections - network
- ypu should see it searching, cancel auto detects, do it manually
- in connections, add
- insert info above
* ssid
* choose wep encryption, shared, remove auto, enter the choosen key, txice
* slect and tell it which key number you chose (eg 1-4)
those are my settings to get it working initially
You can later if you want disable your dhcp, dns, wins n stuff
you may want to consider stopping broadcasting ssid later to prevent people looking for the network, but the wep key encryption should prevent all but the most enthusiastic genius from using the network.
this works on my netgear system.
I have a MDA PRO
Rom Version: 1.12.42 wwe
Radio : 1.08.00
Protocol: 42.41.P8
Ext rom: 1.12.126 WWE
What I want to do: I am trying to connect to the internet using pocket internet explorer using my wifi network at home and not GPRS.
The problem: I go to 'Settings' >>"connections" tab >> 'Network Cards'>> "wirelss" tab
It displays my wifi connection and it says "available" so I {tap and hold} and select 'connect'. It then states that it is 'connecting' but it doesnt connect and reverts back to saying that my network is "available'.
What am I doing wrong? Do I have to set up something on my pc? Any additional settings on my Universal that i should initiate?
I tried searching the forum with no luck in finding someone with the same problem. Is there a thread with a guide that can help me out. Thanks for your time.
soft reset the phone
then no need to go into settings
on today screen (main screen) touch the "G" at the top
it will ask you if you want to activate wifi
select
it should connect automatically
I have exactly the same problem with my M5000.
Can anyone help?
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
What happened there ! :roll:
On the Blue Angel, it was simple - you just set up a new connection, enter the PSK, connect and off you go!
On the Universal, however, I'm having no joy. I've set up the WEP and PSK stuff and the PDA can connect to the network, but when I try and open IE it opens up GPRS. Also, PC Anywhere only works via USB - again, it won't connect via WiFi. I'm sure it's just a case of adjusting some settings but I don't know which ones!
Wifi Connection Problems
Hi I'm experiencing exactly the same problems trying to connect.
I have a Wanadoo Livebox and my xda exec.
I've tried with my connection both unsecured and with 128bit wep encryption using the correct wep key....I still get connecting, followed by available, repeated continuously?
I have the xda set to connect to "the internet" and the authentication to "open". Key index is 1.
Can anyone help?
Thanks
Tim
Wifi Connection Problems
Hi, Just a bit more info...
Encryption is set to "wep"
Mac address is associated with the livebox.
802.1x is ticked to use IEEE 802.1x network access control.
EAP type is Smart cCard or Certificate
Thanks
Tim
Rom version 1.13.82 WWE
Rom date 11/30/05
Radio version 1.04.02
Protocol version 42.37.P8
ExtROM version 1.13.188 WWE
I just checked (with my Blue Angel) that the router and everything else is working and I'm happy to say it all is.
I set up the new connection on the BA from scratch - WPA-PSK enabled, nice long PSK, and I'm using TKIP. Network connects to: The Internet.
This allows me to remote up to the PC via PC Anywhere, and allows me to connect to the 'Net for free via the WiFi router.
When I duplicate the settings on the Universal, neither of the above works. What am I doing wrong?
Help!
You haven't got mac address filtering enabled on your router, and have forgotten to add your Universal's mac address to the list, have you?
Cheers,
Steve.
No, it's disabled.
hehe i had this problem tonight and was going to post up.
Has your router got MAC-control or anything on it? My SSID is not set to broadcast so I put the settings in manually.
I deleted the settings, and put them in manually again a few times, making sure I had the encryption stuff set correctly.
Eventually it connected and now seems to be working fine.
JAmes
Ad Hoc?
Ok, I've tried every possible combination possible and nothing is helping. So my next question to get around this problem>>>>>>>>>>>>>>>>>>>>>>>>>
Can I use my pc as a ad-hoc and us it as my gateway for my Universal?
I have a pc in the office down the hall with the actually wireless router, I have a pc in my room that is accessing the wireless router from the office.
Please let 'US' know if you have tried ad hoc or if you find the right settings to connect to the main wireless router.
Thank you
I am on my wifi network typing this, and my settings show 802.1x network access control not having a tick and network adapter connected to Work......on my iPaq hx4700 before, I used these same settings as they seemed to work well, although it ran WM2003SE not WM5.....
All this said, however, but I was lucky in that my MDA Pro connected to my wifi network at the first attempt - except not with as strong a signal as the iPaq had.....
Wifi Settings
Can anyone who has connected okay, let us have their full settings, so that we can try them?
Is your Router set 802.11g only?
You need to set the router to accept 802.11b and 802.11g.
If your router will only output at 54g, you could try the hack to switch the universal to 54g. I am yet to try this so I don't know if it works.
My MDA Pro connected straight out of the box once I set the ssid and encryption.
Hope this helps
Dave
I've been on the phone talking to 3rd line support at Orange.
Basically, the guy is totally flummoxed!
After trying to talk me through the setup from memory, it seems as though a whole menu of WiFi settings has disappeared from the phone - specifically, the ones that we need! This being the case, he's going to get hold of an M5000 tomorrow and will then bell me back so we can go through the whole process together, both of us using an M5000.
One thought that did occur to me was this: I've only just (like, 3 days ago!) upgraded to the M5000 and I've taken on some kind of free Internet access scheme with my tariff. Could it be that the settings for that (that are sent by Orange in a data SMS) have knackered the WiFi setup?
I'm considering a hard reset with a soft reset before the .CAB files install but will at least wait until tomorrow.
I'll keep you all posted....
Hello everybody !
I have problems connecting my Jamin to wireless networks. When I start wireless Jamin can't find any of the 3 wireless networks that my laptop can find in my area, but when I move it in another room it finds some other networks that are present there. Is there a registry hack to make him connect only to some specific type networks? The network I'm interested has a Cisco Aironet access point and uses a 128 bits WEP key and open authetication. I've had before a Qtek 8310 and I've got the same symptoms.
Any ideas ? And another question: whch is the best registry editor for this device ?
Thank You very much for Your time !
me to
I have Jamin . and i can't find wireless networks even after SR \ HR
I originally posted this message a few days ago but as there were no responses I thought I'd try again. I'd appreciate any advice - thanks for looking ...
I have a XDA mini S. At home I have a wireless router/hub that is hard connected to my PC, but I connect to internet from my laptop via wifi (direct to router/hub) using an always on broadband connection.
I use WPA security, but when I tried to set up the XDA to connect wifi it didn't seem to have the ability to enter the WPA settings.
Ideally I'd like to use the XDA to network with the PC and the laptop for file transfers, but if I can't do that, at least I'd want to enable the XDA to access the inernet via the router/hub directly (ie without the other devices being turned on).
Can anyone help with this please - I know from other postings on this site that I'm not the only sufferer, but I haven't see a definitive solution.
Thanks
Charles
Make sure wireless is ENABLED.
Then
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click the "Wireless" Tab
Add a new connection
General Tab
Network Name: "MyNetwork" (or whatever you want)
Connects to: "The Internet" ("Work" also works for me)
Network Key Tab
Authentification: WPA-PSK
Network Key: "makeUpAKeyHere_thats-long&complex" (I use plenty of ££%!* type characters in mine)
802.1x Tab
Uncheck Use IEEE 802.1x network access control
All done!
Now make sure you have EXACTLY the same Network Key in your router and you should be good to go.
Now to connect to your PC & Laptops you use Resco Explorer 2005 (you'll need to buy it but worth every penny!) to MAP shares from your network.
How to is in This Thread
Worked for me, and I've only had my Mini S (my first PDA ever) a week!
Good luck!
Mark.
I just got my MDA Vario (same as XDA Mini S right?) today and the manual has absolutely nothing about connecting over wi-fi to *anything* let alone my home wi-fi router but I was pleased to find this thread , for a while
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click to expand...
Click to collapse
doesn't have a "wireless" tab (or any tabs for that matter) but it does offer me a list of adapters to let me modify settings (no option to add one though).
The nearest thing to wi-fi is "SDIO WLAN Wireless Adapter" but I'm pretty sure that would relate to something plugged in to the SDIO slot, and not the built in Wi-Fi hardware. Am I wrong?
I've fumbled around a bit and found one screen which offers a view where I might be able to enter the details you've given here, but the textboxes are all locked/readonly (empty) and I can't write anything in them.
I'm really disappointed so far.
the sdio card is the correct one, the wizard has an sdio wifi card inside I believe.
if you select network card under settings-connections you should be able to add a new connection there, if in doubt search for wifi connection, or post back here for more help, good luck
R
I got a PM about this thread, I thought I'd reply here to as the info could help others....In additon othres may be able to elaborate more on the 802.1 query
Mark,
I had the same problem regarding my mini s which you recently answered. I have a US robotics wireless router (9108) and connect it to my laptop (Thinkpad X31) using WPA-PSK and TKIP - the laptop does not allow me to check 802.1 which I understand is for large companies with a special server.
With my miniS I have found that as soon as I enter authentication WPA-PSK and encyption TKIP, the system automatically ticks 802.1 and I cannot access the page to turn it off.
I have tried communicating with O2 via email but they haven't really helped. What I want to know is whether on your machine with WPA-PSK and TKIP you can turn off 802.1 in which case mine has a fault and I can swap it - otherwise I have to find another smart phone!
Click to expand...
Click to collapse
Hi there, I'm a new user of these phones and understand little of Networking but I'll share my settings with you...
Under "Configure Wireless Network" I have:-
Under "General" Tab I have:-
Network Name: MyNetwork
Connects To: Work
Under "Network Key" Tab I have:-
Authentification: WPA-PSK
Data Encryption: TKIP
{Greyed Out} The key is automatically provided
Network Key:- ABCDE1234&*^ <- Whatever key you make up
{Greyed Out} Key Index: 1
Under "802.1x" Tab I have:-
Ticked use IEEE 802.1x network access control
(I can't change this.)
However on my domestic Netgear DG834G router everything connects just fine, g or b. Have you flashed your phone to the latest O2 firmware?
Mine is
ROM 2.21.4.1 WWE
ROM Date 3/9/06
Radio Version 02.07.10
Protocol Version 413.1.03
ExtROM Version:- 2.21.4.101
I hope this helps,
Mark.
PS. I'll post this in the thread too, it may help others.
hello
i recently purchased the xda mini s and a wifi usb adaptor. i am having trouble accessing the internet. my computer connects to the internet using ethernet to my wall (im not sure where it goes from there). i can connect my phone to a peer to peer wifi network but it does not let use the internet, could anyone help me with the settings please i would greatly appreciate it.
many thanks
harvey
To achieve that you need to set your primary connection as shared in network connections. Once you do that, adhoc mode should be possible without issue.
Please help - similar problem
Hi - I have an XDA Mini S and have connected without issue to the Internet via my router (Wirelessly of course).
The issue I have is that I cannot connect to any network shares on my PC. When I had a CF wireless card in my Ipaq I could do without issue. I have downloaded a ping proggy to XDA and can ping router but cannot ping the PC I have the shares on.
Normally (If I was using a laptop) I would check Workgroup/Domain settings, authentication credentials etc...nothing like this on XDA.
Please help
Wiggz
Quick - fix
I have spent hours messing around with this - however I have had a similar problem with a corporate laptop which wouldn't work.
I changed the router from WPA to WEP and bang - worked straight away. Exactly the same on my XDA Exec so should be same for Mini S (pocket PC 2005).
Hope this helps.
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi for transferring files.
it shows the connections status excellent on both devices with ip address 169.254.72.236 on ppc and 169.254.130.63 on laptop.
i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
MDA Wifi Wont Connect
Hi there-I have an mda vario which I was able to unlock as it was locked to t-mobile and I am with another network. After ages I was able to get a connection to my router or at least it says that it is connected. However I still cant connect to the net via wifi on my mda. I have put in the settings for wpa and wpa-psk, etc have unticked the 802.1x box etc but still no joy. Can anyone help?
Thanks
Morgas
Hi all, new here, thanks for the info posted, was useful but i'm still having problems with the wifi on my xda mini s to my netgear dg834gt router with sky broadband.
The problem seems to be that my xda finally connected to my broadband and router, but now when I try to use internet explorer on my xda I just get
"400 Bad Request"
"Bad filename."
Can anyone help with this? Thanks in advance
I am befuddled. I have a T-Mobile MDA and a netgear WPN824 wireless router. It is set for extended range and 108Mb transfer rate. I have it set to WPA-PSK [TKIP] + WPA2-PSK [AES]. Its using channel 6. SSID is hidden. Radio is on and I have it set for range extender. RIP is off and UPnP is on. Access control list isnt turned on. Any suggestions on how to get my MDA on the home network? I did enable wireless G on the MDA by altering the registry so it is now an option. I can get the MDA to see the network and create a connection that uses WPA-PSK [TKIP], it just simply doesnt connect and I am not sure why. I can see the status of connected devices and it shows the mac, but it can never draw an IP. Odd thing is, it doesnt show a device name for the PDA on the router...could that have somethign to do with it? Any software that might allow higher networking compatability?
so no one with any ideas?