Related
G'day all,
Well I got my jasjar today, and essentially I was originally under the impression that with this I would be able to use the wireless technologies of my laptop and jasjar to sync outlook, and browse the fiels on the notebook etc.
Then reality hit me.
You cannot sync via wireless. Then as it turns out I have no clue on how to setup a wireless network..
So im just wondering if anyone can inform me, is it possible for my jasjar and centrino notebook to communicate with each other wirelessly? If so what do I need to do in order to do that.
Thanks in advance
a very confused wireless enthusiast.
ActiveSync will not work on wi-fi, but you can setup a device-to-device network and use files on a share on your computer. If your Centrino has Bluetooth, you can use ActiveSync with that.
i have AS over bluetooth fine, and allows me to browse the internet etc
i have WIFI configured at home and work which allows me to browse shared folders with passwords and permission, run terminal server to my XP and our Terminal Server, and allows me to run Terminal Server over wireless over the internet direct to my remote work servers.
so it really depends on what you want to achieve, it will more than likely be a combination solution.
WIFI <> AS
WIFI = Internet and Shares and Terminal Server
WIFI = Streaming music and videos
Bluetooth = AS
Bluetooth = Internet
Bluetooth <> Shares and Terminal Server
Well my laptop doesnt have bluetooth so that is no good to me.
Yeah I just want to access the laptops music, video or documents wirelessly. Im a little or completely lost as how to do this, I do not have broadband, and I have no networking experience really.
All I have is a Centrino laptop armed with the latest wifi components, and a jasjar.
I managed to make a device-to-device connection as someone suggested, and the devices appeared to connect, but I couldnt seem to do anything with them as such.
Try Resco Explorer (www.resco.net) It allows you to map network drives (once you have your device-to-device connection sorted)
Wiz - Off topic but can you share how you got your O2 Exec Blackberry Enabled? I'd like to do the same. Ta - philg
Got resco explorer, gotta say thats a handy lil feature packed app. But to my problem at hand....does anyone have or can anyone give me a run down of how to get a device-to-device networking happenng.
I can get the two devices to connect as such via wifi, both jasjar says connected as does XP, however when I go to map a network drive, in Resco or XP fo rthat matter, I just an a message saying no computer is connected or availbe. This despite the fact that it is right there!!
Any suggestions, tutorial recommendations?
Thanks.
r u using xp pro or home?
what sort of antivirus r u running?
firewall? ms or other
any other security settings imposed?
generally, go to pc, find folder u want to connect to, RMC, properties, sharing, enable with a name you like, apply security with password (nb sharinmg over wifi will allow others to access without security).
goto pda, resco, map drive, type in \\computername\sharename, enter your username to log onto pc and password (assuming these were the same pemissions you applied when setting up)
I had this working using a wifi access point via a local router, but norton screwed it up and been unable to fix....
Yes XP Pro
Default Network Security really, like I said ive never really used them or accessed the features so usually keep em closed.
and running NIS 2005. But yeah look im not a total noob, ie I disabled NIS at one point to see if that was hampering the connections, and even enabled it and enabled full access and that did nothing either.
what you suggested I pretty much did.
however, when ive set up the device to device connection it gives me security options ie WEP WPA etc, done these restrict other networks from using the shared folder?
I ask because there are a fare few wireless networks around me, wouldnt want to give any of them access to my stuff, even if it is only my music and some documents.
If you start your WIFI on your PPC and PC, does the WIFI icon on the PPC create the connection, ie the antennae and two arrows that remain still.
If so, then you have got the connection to the PC, we just then need to get the folders and access to each other. If not, then we cant get any further till we resolve this issue.
RMC My Computer or go to control panel system. Far right Tab allow remote connections, tick the box to allow. This should allow a Terminal Server connection from your PPC to your PC. So find out the IP of your PC, then open TSC and enter the same IP address and see if it connects. If it starts to get create a connection via GPRS/3G cancel it. This will be due to the "My Work" and "Internet" settings which we will have to come back to.
If it you can open a TSC then you have established the WIFI and can create and authenticate a connection, so it means we have a problem with the foler sharing.
So in summary, doing the above will:
1. Estabish that the WIFI connection using WEP is working
2. That you are connecting over the same common network using TSC to connect and control your PC from your PPC
3. THat the problems are folder sharing related
Let me know how you go.
I wont be able to try these suggestions until tomorrow but im pretty confident one of these will work, thanks for taking the time, I will definitely try em tomorrow.
But just for what information I have ATM, yes the wifi icon you described is there, so like I said the PPC is definitely connecting, just when its connected I dont seem to be able to do much.
Will let you know how I go
THanks again
I have resolved the problem that I have been having with connecting to a network share, when I could before and cant now....
The answer was simple, and I cant believe how simple.
The answer was found here, and posted by DUTCH
http://forum.xda-developers.com/viewtopic.php?t=21317&highlight=network+wifi+connection+share
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
If your not sure where this is let me know, but it provided and immediate fix for me. ...
Well, actually, I did two things simultaneously, so not sure which actually worked. I also went into the specific connectsion > Network Cards on the PPC, Network Adapter set to work, then Wireless tab, found the specific network opened this and changed this from internet to work.
So the combineation of the IP settings and the change from internet to work allows my ppc to connect to my computers folder shares.
well, i tested it furter.
If i left the work setting on my network, then when I used the internet, it opened and connected a gprs connection to open the web site.
so i changed the network connect back to "the internet", and was able to use the network card to connect to the internet and access the web.
I was also STILL able to access a network share whilst the network connected to "the internet", so the solution for me was
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
Guys i have searched over 1 hour in the Internet but no solution sorry but still i cant get connected.
If someone please Post Step by step procedures i would be very thankful
here is some useful but not completed websites:
The Best one seems to be this but it is very old:
http://www.microsoft.com/windowsxp/using/networking/expert/bowman_september24.mspx
Result from other Sites:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
http://www.modaco.com/index.php?showtopic=237804
Drop it. No way to do it. I've posted here just a few weeks ago, tried everything, with no luck. It simply isn't possible with the latest ActiveSync 4.1, and the older one 3.8 which has the wifi functionality, is not compatible with WM 5.0.
So forget about it. You can connect through wifi, but no synching...
Thank you very much but what is the benefith to connect through wifi?? i cant even send a file or connect to internet!!! At list give me a clue to conect Internet through WiFi & PC. but i think if we do the right Setting for IP in WiFi we would get connected some how....
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
krale said:
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
Click to expand...
Click to collapse
Resco File Explorer will let you add "share drives" also. You can add directories or drives.
Upss...
It seems that sharing internet connection through wifi is NOT possible with WM5... They have just ruined everything with this stupid upgrade of activesync!
Anyone aware of a work arround so my PC internet connection works on my PPC connected to it with ad-hoc wifi?
as i said i think with IP configuration there might be a way to share it. or i think XDA fellow should program a Stack for this issue on activesyns4.x
Internet over Wi-Fi
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Perhaps you are right Acer, since I was not able to fully test it with your specs.
I have a company cable network LAN, and a wireless adapter on the laptop which is free. But unfortunatelly, I was not able to set up internet sharing of the LAN, since it goes over a Network Bridge. Anyone now how this could be enabled?
THanks for the info Acer, its helpful...
Re: Internet over Wi-Fi
acer175 said:
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Click to expand...
Click to collapse
Dude thanx i have a laptop and i have made an ad-hoc network between my pc and the Prophet, also i have shared my dialup connection but it is not working, if possible would you please explain step by step settings?
do you have Windows XP on your laptop?
acer175 said:
do you have Windows XP on your laptop?
Click to expand...
Click to collapse
yes i am using XP home Edition and my laptop is Averatec 3200 series
Just go to properties on your dial up internet sharing and set share this connection. i thinks thats about it. i've not use it for a long time, but if I remember correctly that's about it. you have to share it with your WI-FI adapter of course.
Some WI-Fi card can configure this automacticly. Like several I seen. You can set it as a router, and you're good to go.
BUMP @ acer175 ..where are you dude??!!!
Hi lover. Sorry, I thought Munyuk81's response was enough.
Anyway, on Windows XP, open Network Connections, right-click on your dial-up/ADSL connection, selet Properties.
Open the Advanced tab, you should have an Internet Connection SHaring section. Enable "Allow other users to connect etc, etc...". Select the wireless network adapter if given the option. Click YES if asked to change the IP.
Next create a wi-fi network using the XP utlities or your card's utilities. Don't touch the IP address of the wi-fi card.
Next on your Prophet, enable Wi-Fi and it should discover the network by itself. If you set a key in the step above, it will ask you to enter it.
@acer175
Do you know how i can share my Lan internet which goes over a Network Bridge? WHen I removed the Lan from the Network Bridge, I could see the options for ICS, but there was no internet to share, as the connection was lost. Adding it back to the network bridge restores the internet connection, but removes the option for sharing it with the other (wifi) card...
Anyone?
i haven't tried it myself, but thinking logically, when you add a connection to a bridge, it loses its individual attributes. You have to check the properties of the bridge, and check if there are ICS options there, however I do not think that XP allows that, but you can try.
ALso see if this may be helpful:
http://www.practicallynetworked.com/sharing/xp_ics/
thanx acer175.
i have connected my PPC to PC but still no internet sharing!! also i have shared some drives and folders in my PC but with resco explorer i cant see any of them
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
acer175 said:
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
Click to expand...
Click to collapse
the file sharing works perfectly (thank you\) but no internet conection when i start IE browser it says : The page cannot be found. check the name and try again ?!!!
what is your settings in
Start.Settings.Connections.ConnectionsAdvanced...Select Networks?
both of them are My Work Network
Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.
Great! Many thanks! ;-)
whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?
I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.
Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!
Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.
Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...
The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.
Thanks man!
Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(
levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
What I want to do is browse the internet on my 8525 using the internet from my laptop, internet sharing but from my laptop to my device and using bluetooth...
Ive already look at more than 50 topics in this forum, cingular forums and over the internet and nothing, I get tutorials to use the 8525 as a modem, to share the internet from the device to the computer but not from the computer to the device.
Ill appreciate any help... thanks.
normestd said:
What I want to do is browse the internet on my 8525 using the internet from my laptop, internet sharing but from my laptop to my device and using bluetooth...
Ive already look at more than 50 topics in this forum, cingular forums and over the internet and nothing, I get tutorials to use the 8525 as a modem, to share the internet from the device to the computer but not from the computer to the device.
Ill appreciate any help... thanks.
Click to expand...
Click to collapse
depends on what you have. if you have wm6 you can do this by using the internet sharing utility on your 8525. pair your device with your computer first. then go to internet sharing and under pc connection scroll down to bluetooth PAN, select the correct connection you use and then click connect on the bottom. that should do it.
I have WM5...
normestd said:
I have WM5...
Click to expand...
Click to collapse
not really familiar with that process in wm5.
I have that 'internet sharing' utility but that does nothing; it says "connect" but when I try to open a website it does nothing or it attempts to connect thru the GPRS using any of the three settings under Network Connections (Cingular GPRS, Media Net, My ISP GPRS); and I don't hava any data plan or media net...
normestd said:
I have that 'internet sharing' utility but that does nothing; it says "connect" but when I try to open a website it does nothing or it attempts to connect thru the GPRS using any of the three settings under Network Connections (Cingular GPRS, Media Net, My ISP GPRS); and I don't hava any data plan or media net...
Click to expand...
Click to collapse
oh thats easy... you have to initiate the connection first. go to the mobile browser and just go to google.com or something so it can call up the gprs/edge/3g connection. when it connects then you can do the internet sharing utility thing. the phone has to be connected to the mobile internet before you can share the connection.
You have to set internet sharing to Bluetooth pan like it says here and click on connect
http://www.wireless.att.com/support...alsCategory=Bluetooth+Set+Up&tutorialId=98500
After that it depends on what bluetooth stack you are using on your pc.
If you are using the MS Bluetooth stack you have to right click on the bluetooth icon in the system tray and click on "join personal network area" If you already have the phone paired up you click on the phone, then click on connect.
If you are using a widcomm stack, open up My Bluetooth places, click on view devices in range. Right click on the phone and click on "Connect Network Access point"
The Toshiba stack is a big pain in the butt. You have to set up a partnership in custom mode. and select Bluetooth pan as the default service. Once paired up the process is just like the widcomm stack
When I go to "Internet Sharing" and hit connect it says "Device setup finished. ON the PC, connect Bluetooth PAN"
Now when I go to the PC and click on "Connect Network Access Point" (im using widcomm) it says "The network Access connection failed - error 0x81000015"
I got mine to work with Black Majic but there's frequent disconnects. i cannot seem to hold a connection for more than 5 minutes at a time. but USB sharing works for at least an hour at a time... sigh
you must have a data plan
normestd said:
I have that 'internet sharing' utility but that does nothing; it says "connect" but when I try to open a website it does nothing or it attempts to connect thru the GPRS using any of the three settings under Network Connections (Cingular GPRS, Media Net, My ISP GPRS); and I don't hava any data plan or media net...
Click to expand...
Click to collapse
hi my man. if you don't have a data plan the internet sharing won't work at all if you have t-mobile and willing to pay for the service. try changing your phone on t-mobile website for a blackberry .then add the blackberry internet . is cheaper and same thing as the total internet service
Can this be done via "Dial Up Networking", I read a tutorial somewhere but there was some steps that I wasnt able to pull off; I did create a new connection by going to Start >> Settings >> Connections >> Connections >> Add a new modem connection >> where it says "Enter a name for the connection" I put My connection >> where it says "Select a modem" I select "Bluetooth" and hit next, then I select the name of my computer (ex; Acer-284ru9) because it was already pair with the device, then I hit next again and it asked me for a phone number to and I enter *99# (because thats the phone number I saw at the previous tutorial), then it ask me for:
username: anything
password: anything
Domain*: blank
and enter finish; then I went to Start >> Programs >> Internet Sharing >> select:
PC Connection > Bluetooth Pan
Network Connection > My connection
hit "Connect" and it starts connecting, and on the computer it says "Bluetooth Device MyPocketPC is connected to the "Dial-Up Networking" service on this computer" but it keeps attempting to connect on the device and it does for about 2 seconds, then drops.
I dunno, maybe there's something missing, Ill appreciate any help, been hitting my face with this for the last couple of days.
Please guys DO read http://forum.xda-developers.com/showthread.php?t=282780 - it explains everything.
normestd said:
What I want to do is browse the internet on my 8525 using the internet from my laptop, internet sharing but from my laptop to my device and using bluetooth...
Ive already look at more than 50 topics in this forum, cingular forums and over the internet and nothing, I get tutorials to use the 8525 as a modem, to share the internet from the device to the computer but not from the computer to the device.
Ill appreciate any help... thanks.
Click to expand...
Click to collapse
I have the situation like you. Did you manage to get the solution?
I installed the widcomm (http://www.telusplanet.net/public/wladykad/) , bbs_hermes_03A.cab and managed to join the personal access network, but when to open the IE, it failed (load page). Anybody can help me?
When i set the connection, Setting>my isp>add a new modem connection>name (any)>select a modem -->bluetooth>press next>add new device>problem here...cannot pair with my bluetooth dongle...but i can join PAN via bluetooth manager (BBS_hermes_003)
appreciate any help
device: cingular 8525
Pro : CHT9K WM6 WWE-C v1.1
Radio : 1.50
think i did this before with my old pda.. (6315) but just cant remember how.. it wasnt easy though..
Did you manage to solve?
1 thing to add...i can "join a personal network manager" by a simple click...
and in the bluetooth properties(in pc), i have selected "allow other devices to access the internet/LAN via this computer"...
In the Bluetooth manager, Active connection, what i can see is under outgoing connections, it has my name for my network..and network access...
I try to describe what is the item in bluetooth manager to hope someone can help me to solve the problem...
and my final intention is to run it from my office win98 (to provide internet access for my pda) which has internet access and link to htc hermes (100) to access to real time data....
any help much appreciated...
Finally i managed to do internet sharing via bluetooth.
This what i did (other then my previous post)
go to Setting>Connections>Advanced>Select Networks>under Network Management & Porgrams tht automatically connect to the internet should connect using ..and i choose >My Work Network>Edit>Proxy Settings>checked This network connects to the Internet..
It worked...i can connect to internet via bluetooth dongle (bluesoleil)...horray...
I hope i can emulate the same to my office windows 98 ...
If you want to set up a remote desktop from your HD2 to your laptop through WiFi, using NO ROUTER and NO INTERNET connection, you easily can. What will you use it for and why? It is up to you.. but it can come in handy considering this can be done anywhere as long as you have your laptop and your HD2 with you. This is how:
-Download 'Connectify' here and install it on your laptop
-connectify1.png: 1) The name of the WiFi-connetion that you will connect to from your phone2) Password (not needed, but if you choose none, anyone with a WiFi device can connect to your WiFi 3) Select your Wireless Network Connection4) Start the WiFi router (after this, connect to the WiFi network on your HD2!)
-connectify2.png: 5) and 6) Open your 'Network and Sharing Center' by clicking the link the image shows
-connectify3.png: Follow 7)
-connectify4.png: Follow 8)
-connectify5.png: 9) Write down this number
-RemoteDesktop1.jpg: You have connected to your new Wireless network on the HD2
-RemoteDesktop2.jpg: Open 'Remote Desktop' on your HD2 in [START] -> [Tools] -> [Remote Desktop], in the first field, fill in the 'IP'-address that you found in step 9) in 'connectify5.png'. In the second and third field, fill in the username and password for your laptop (the user-account you use to login to windows)
-RemoteDesktop3.jpg: Settings for your remote desktop.. choose as you please
--> Press 'Connect' and you're good to go!
REMEMBER THAT THIS WILL ONLY WORK WHEN YOU'RE IN THE WiFi RANGE OF YOUR COMPUTER!
Thanks to Leftkats for the solution:
leftkats said:
ok found something... There http://connectify.me/ I don't know if its a demo but it didn't ask for any serials so I assume its freeware.. Download and install, and follow the easy to set up wizard... Worked for me...
Cheers
Click to expand...
Click to collapse
Original post:
Hi,
I'm really having a hard time understanding how to connect to my Windows7 Pro-based laptop through WiFi with my HD2.
1) I don't understand how to set up a WiFi connection and if I'm supposed to find it on my HD2 and connect to it before trying the remote desktop connection
2) I don't understand how to set up a WiFi connection on my laptop that can be found from my phone
3) I don't understand how to find the IP (or any other settings like ports) that should be used trying to connect to the laptop from remote desktop on my HD2.
(I've read this: http://www.windowstalk.org/2009/10/how-to-find-your-computer-ip-address-in-windows-7/ ..but did not come as far as to details, no kidding perhaps when I can't even set up a connection).
Anyone willing to give me a detailed guide, from first click to last, on my laptop and HD2? Please treat me like a 3yr-old when explaining.... /:
//Bear in mind that I have used the whole night searching for a guide on the net and the forums.. but none take me there from the absolute step one. Most of them just say "fill in the information and you're GO! " /:
Click to expand...
Click to collapse
Ok so first I'm presuming you have a wireless network, dont no if it can be done without one (correct me if im wrong folks) so im on xp so might be different on 7 but nearly the same i guess
so have your pc and you're phone both running from the wifi
then on your pc go to my computer, right click and open properties, you wanna be on system properties by now and look for Remote, you wanna allow remote assistance and allows users to connect remotely,
then fire up RD on your HD2, where it says computer thats where the ip of the oc goes, you can look it up by clicking the network icon in the desktop of the pc, should be something like 192.168.x.x type that in you're phone (computer section in remote desktop)
the username is the same username as your pc is called or youre account
then click connect have a go if you need more help just reply mate
EDIT I will take some screen shots for you
Demon_man said:
Ok so first I'm presuming you have a wireless network, dont no if it can be done without one (correct me if im wrong folks) so im on xp so might be different on 7 but nearly the same i guess
so have your pc and you're phone both running from the wifi
then on your pc go to my computer, right click and open properties, you wanna be on system properties by now and look for Remote, you wanna allow remote assistance and allows users to connect remotely,
then fire up RD on your HD2, where it says computer thats where the ip of the oc goes, you can look it up by clicking the network icon in the desktop of the pc, should be something like 192.168.x.x type that in you're phone (computer section in remote desktop)
the username is the same username as your pc is called or youre account
then click connect have a go if you need more help just reply mate
EDIT I will take some screen shots for you
Click to expand...
Click to collapse
I don't have a wireless network. I have a laptop with WiFi set to 'ON', and my HD2's WiFi set to 'ON'.. not router or anything like that.
I'm also using a Mobile Internet for my internet, so that connection comes up in my network and sharing centre as connected, and the IP is not standard like 192.168.0.x..
You'd think it would be possible to just connect the bastards like good old bluetooth.. well, wish at least.
I have allowed remote desktop in the settings of my laptop.
I believe the main issue here is setting up a WiFi network that I can connect to from my phone /:
ok so let me gey this right,
you wanna connect via Remote desktop to the laptop and you have no router?
Why?
Remote desktop allows you to view your computet on youre phone,
bit confused bout what you wanna do now
Demon_man said:
ok so let me gey this right,
you wanna connect via Remote desktop to the laptop and you have no router?
Why?
Remote desktop allows you to view your computet on youre phone,
bit confused bout what you wanna do now
Click to expand...
Click to collapse
I want to lie in bed browsing my laptop from my phone.. The size of the phone is so much more attractive to me /:
Why is a router such a biggie? And if it is, can remote desktop be used via something more simple assay.. bluetooth? /:
as faw as im aware Remote desktop can only be done through the net i could be wrong,
did you say you are using your phones internet on the laptop to browse or a usb dongle thingy lol
Demon_man said:
as faw as im aware Remote desktop can only be done through the net i could be wrong,
did you say you are using your phones internet on the laptop to browse or a usb dongle thingy lol
Click to expand...
Click to collapse
USB-dongle with seperate SIM dedicated for data use d:
So I've got internet from the comuter (lol, writing here hehe), but I don't want to use GPRS from my phone just to access my laptop /:
forgot password lock
forgot password lock micro max mobile model W900 pls help !!
Ok gothcya, then all you should have to do is have your laptop connected to the net, open Remote desktop on your phone and where it says computer type in your ip address from your laptop, type your username which should match the same as the laptop, and you may need a password on you're win 7 account might not though,
You're ip address can be found here http://www.whatsmyip.org/ on this site it will tell you you're IP address that's what goes in the computer bit in remote desktop mobile on your phone,
I dont think you will be able to do it over wifi as you're not got the laptop on a wireless network, so it will use your gprs data
EDIT = just found this detailed blog, might help you out but still dont think can be done over wifi the way you want it mate
http://highdiver.wordpress.com/2010/02/13/setting-up-remote-desktop-connection-on-htc-hd2/
Demon_man said:
Ok gothcya, then all you should have to do is have your laptop connected to the net, open Remote desktop on your phone and where it says computer type in your ip address from your laptop, type your username which should match the same as the laptop, and you may need a password on you're win 7 account might not though,
You're ip address can be found here http://www.whatsmyip.org/ on this site it will tell you you're IP address that's what goes in the computer bit in remote desktop mobile on your phone,
I dont think you will be able to do it over wifi as you're not got the laptop on a wireless network, so it will use your gprs data
EDIT = just found this detailed blog, might help you out but still dont think can be done over wifi the way you want it mate
http://highdiver.wordpress.com/2010/02/13/setting-up-remote-desktop-connection-on-htc-hd2/
Click to expand...
Click to collapse
Ok, thanks mate, I'll try and see!
Tried the instructions on that blog, it didn't help though ):
Im struggling to figure out what you are stuck on now lol, I told you where the stuff is and what you need to do what are you struggling with ?
Demon_man said:
Im struggling to figure out what you are stuck on now lol, I told you where the stuff is and what you need to do what are you struggling with ?
Click to expand...
Click to collapse
It worked (using GPRS).. too bad I can't do it with WiFi though (direct WiFi to my laptop). Strange though.. if I can share internet with my HD2 by making it a router, it should be possible with the laptop:
Mobile Broadband from laptop -> Laptop as WiFi router -> WiFi on HD2 now with internet -> HD2 on WiFi shared by laptop -> Remote desktop of laptop ):
Luggruff said:
It worked (using GPRS).. too bad I can't do it with WiFi though (direct WiFi to my laptop). Strange though.. if I can share internet with my HD2 by making it a router, it should be possible with the laptop:
Mobile Broadband from laptop -> Laptop as WiFi router -> WiFi on HD2 now with internet -> HD2 on WiFi shared by laptop -> Remote desktop of laptop ):
Click to expand...
Click to collapse
so basically you want to be connected on your laptop, which will be set as a router, with your phones wifi connection... interesting... Something like an ad-hoc connection???
I will try that and let you know if it works...
leftkats said:
so basically you want to be connected on your laptop, which will be set as a router, with your phones wifi connection... interesting... Something like an ad-hoc connection???
I will try that and let you know if it works...
Click to expand...
Click to collapse
Cool! ^^
(also if you can make the laptop a WiFi router that allows the HD2 to connect to it's WiFi and use remote desktop.. with no internet connection at all, that would be awesome!)
Luggruff said:
Cool! ^^
(also if you can make the laptop a WiFi router that allows the HD2 to connect to it's WiFi and use remote desktop.. with no internet connection at all, that would be awesome!)
Click to expand...
Click to collapse
ok found something... There http://connectify.me/ I don't know if its a demo but it didn't ask for any serials so I assume its freeware.. Download and install, and follow the easy to set up wizard... Worked for me...
Cheers
leftkats said:
ok found something... There http://connectify.me/ I don't know if its a demo but it didn't ask for any serials so I assume its freeware.. Download and install, and follow the easy to set up wizard... Worked for me...
Cheers
Click to expand...
Click to collapse
Thanks! That worked like a charm ^^
I haven't read through all of the post but there is a better way than gprs. If your laptop's wifi adaptor supports ad-hoc mode (tbh it should. i don't know of an adapter that doesn't) it will be possible to set the laptop up as the network wifi server and then connect the phone to it via wifi. Then, all you'll need to do is right click "computer" on the laptop then click "advanced system settings" and then "remote". Finally click "allow connection from any computer running remote desktop". Next, in the start search box look for "command prompt" and when it appears click it (you may need to run it in administrator mode). Run ip config and look for the ip address assigned to "Wireless LAN adapter wireless network connection".
This is where we move to the phone. Connect the phone to the ad-hoc network you made on the laptop and run remote desktop on the phone. Give the ip you just obtained from ipconfig and give it your username and password, hit connect and jobs done.
I'm not gonna tell you how to setup the ad-hoc network coz i think you need to do some research on google in order to learn the value of how good it is (plus i'm watching the post race from the Canadian F1 GP).
M3PH said:
I haven't read through all of the post but there is a better way than gprs. If your laptop's wifi adaptor supports ad-hoc mode (tbh it should. i don't know of an adapter that doesn't) it will be possible to set the laptop up as the network wifi server and then connect the phone to it via wifi. Then, all you'll need to do is right click "computer" on the laptop then click "advanced system settings" and then "remote". Finally click "allow connection from any computer running remote desktop". Next, in the start search box look for "command prompt" and when it appears click it (you may need to run it in administrator mode). Run ip config and look for the ip address assigned to "Wireless LAN adapter wireless network connection".
This is where we move to the phone. Connect the phone to the ad-hoc network you made on the laptop and run remote desktop on the phone. Give the ip you just obtained from ipconfig and give it your username and password, hit connect and jobs done.
I'm not gonna tell you how to setup the ad-hoc network coz i think you need to do some research on google in order to learn the value of how good it is (plus i'm watching the post race from the Canadian F1 GP).
Click to expand...
Click to collapse
Okay d: There was a way easier answer, posting quote (easier):
leftkats said:
ok found something... There http://connectify.me/ I don't know if its a demo but it didn't ask for any serials so I assume its freeware.. Download and install, and follow the easy to set up wizard... Worked for me...
Cheers
Click to expand...
Click to collapse
Luggruff said:
Okay d: There was a way easier answer, posting quote (easier):
Click to expand...
Click to collapse
Nothing more than a front end for what is already in windows. It looks like it basically does what i was instructing you to do by hand. I won't have used it but i know what i'm doing and i have a wifi/wired domain network so my phone is actually joined to the server and the server treats it like a client. The same as it would the pc so i can use the internal dns to find any machine connected and not have to worry about the ip's (but i do know them all off of the top of my head)
M3PH said:
I haven't read through all of the post but there is a better way than gprs. If your laptop's wifi adaptor supports ad-hoc mode (tbh it should. i don't know of an adapter that doesn't) it will be possible to set the laptop up as the network wifi server and then connect the phone to it via wifi. Then, all you'll need to do is right click "computer" on the laptop then click "advanced system settings" and then "remote". Finally click "allow connection from any computer running remote desktop". Next, in the start search box look for "command prompt" and when it appears click it (you may need to run it in administrator mode). Run ip config and look for the ip address assigned to "Wireless LAN adapter wireless network connection".
This is where we move to the phone. Connect the phone to the ad-hoc network you made on the laptop and run remote desktop on the phone. Give the ip you just obtained from ipconfig and give it your username and password, hit connect and jobs done.
I'm not gonna tell you how to setup the ad-hoc network coz i think you need to do some research on google in order to learn the value of how good it is (plus i'm watching the post race from the Canadian F1 GP).
Click to expand...
Click to collapse
hehe... was watching F1 as well..!! I did try the ad-hoc option but I couldn't get it to use my existing Wifi connection for some reason... what they do now, is only connecting to computers with wifi connection together... I didn't spend so much time with this to be honnest, but the other option I mentioned before is a lot easier for everybody...