hello! i've searched but didnt find any help with my problem. When my jasjar rings (incomming call) and after i press the answer button (the green one) i need to wait about 1 to 2 seconds before i can hear the person that is calling me...strange...did this ever happen to you? how can i solve this problem? Thanks in Advance
Yes, i have the same problem on my MDA Pro
After pressing the green button, i have to wait 3 secounds with speaking.
I had the same problem and now is solved.
In phone/options/band select WCDMA (not automatic)
i think that didnt solve the problem...sorry...thanks
I have the same probelm on the incoming call. However, i finally realized that it's the problem on the Pocket Plus V3.0.4 installed on the system.
It appear to be normal once i removed the program.
It's the case for me, and i hope it would help you as well
I too have this problem with my I-Mate Jasjar. I need to wait for a few seconds after hitting the answer button before I can hear the calling party. I did a hard reset and installed the latest wwe ROM available on clubimate site. The problem still persists even without any third party software installed. So I do not blame pocketplus for this problem. I think this is a software/hardware issue which should be addressed in a ROM upgrade.
I have the same problem with my JasJar. I have also updated to the lates ROM from clubImate by advice from clubImate support.
Sometimes the phone does not even answer the call at all when pressing the green button. This is becoming an even more expensive phone since I have to call back so many people on account of missed calls
Seriously, It cannot be right that a problem like this exists on a phone in this price range. ClubImate support even said they had never heard of this problem before.
i did a few hard resets and the problem persists without any extra software installed. "Very bad bug". i've already test a K-jam and it works beautifull...i'm sad
Got my XDA Exec today. It's pretty good but is not the same as my XDA2. Even less phone. More PDA...
If I turn my machine off in landscape mode and then close the lid with the screen out (like the XDA2) then when a call arrives it takes ages to answer because the screen has to rotate first to portrait mode.
If I turn off and close in laptop mode (landscape) then it rings immediately and I can answer it immediately using the hinge buttons.
Maybe it is the same for you?
i have noticed it seems to be quicker to goto portrait than to landscape in all respects of use
ok, lets try it...thanks
how i test it: jasjar "on" charging, open in portait mode. same delay.
L to P is roughly twice as long for me.
going to L i get twist and flip and the display is done ready and waiting
going to P i get twist and flip then get a 2s ish of L before it flips to P
this was battery power
*** its the same on mains and battery !
Carnivor said:
L to P is roughly twice as long for me.
going to L i get twist and flip and the display is done ready and waiting
going to P i get twist and flip then get a 2s ish of L before it flips to P
this was battery power
*** its the same on mains and battery !
Click to expand...
Click to collapse
When my Exec is on, the rotation is pretty much instant. I have no apps running. It's only when a phone call wakes it up that the rotation is slooooow.
My Qtek 9100 also take app. 5 sec before it rings, and the S100 I had before was the same. My dad has an XDA mini, same problem. It seems like pocket plus will increase the problem, but even without any extra software its not working perfect. Its strange after such long time, they havent been able to solve simple problems like theese.
I also get this, Its very annying. Maybe they incorperated it so you can answer the call asap and the before it acually picks up, you have a few seconds to turn the screen round and see whos calling ect?
I have an Exec and there is certainly a knack to answering a call on it, but i'm getting better!!!
Firstly the voicemail seems to kick in way too early, i only get 4 rings of the 'ring' ringtone max before the VM kicks in, sometimes i think it is less, but i may just be going deaf! does anyone else find this a problem?(not deafness)
As i usually have the exec closed in my pocket, this is how i answer a call.
1, Hear the first ring, if i don't it's too late already!
2, Drop everything, and remove phone(ha!) from case and open into laptop mode only. If i rotate all the way into PDA mode the screen takes too long to change and the call goes to VM before i can see who it is.
3, Answer call after seeing who it is
4, Rotate or close screen and put to my ear and wait 2 seconds to speak.
It's a real pain in the arse and very annoying.
Great forum btw, it's been very helpful, i knew bugger all about PDAs three weeks ago.
Ian
Which button(s) do you have success with?
The small green on the side,
the green above the other keys on the keyboard,
the soft key button,
or touching the screen?
ipanter said:
...
Firstly the voicemail seems to kick in way too early, i only get 4 rings of the 'ring' ringtone max before the VM kicks in, sometimes i think it is less, but i may just be going deaf! does anyone else find this a problem?(not deafness)
...Ian
Click to expand...
Click to collapse
If you're using the Exec on o2, you can adjust the cut-in delay at the o2 end. You do so by keying in/sending the following to o2:
**61*901*11*xx# [send]
(where xx is number of seconds, e.g. 30.)
Note: I think the maximum delay allowed is about 30-secs - at least I've never got it to extend longer than that!
I have found that o2 occasionally reset mine back to about 10-secs, so have it programmed into a contact number.
HTH
I've found something interesting.
I tried to swap two sim cards.
<boring>
The one originally in my phone was a sim card from Orange Denmark (where I live). Orange has since been bought by Telia, and this same sim card is now using Telias network. This is by design. It gives my the roaming symbol all the time since the buy-over.
To say the least, some things have been very ****ty in this process, so I thougt that I might try another sim card.
</boring>
I had another one from TDC (another danish operator), and bang! My Universal (Jasjar) answers instantly - every time - on all the buttons!
Could some of you who have this problem as well, please confirm this? Please tell what kind of sim card (and country) you are networking through, and try another one.
I have a fairly new 8525 (bout a month old) and the problem is it hardly ever wants to vibrate when I get a new mail message. It will at times, but it never wanted to vibrate upon receipt of a new email message. I just figured that's how it was supposed to be until I installed a trial of Wisbar Avanced and it had a setting for "vibrate" to turn on in it...and it worked like it should. It would vibrate anytime I got a new email, even if the screen was off, the device was locked, and i hadn't touched it in a while.
I removed the trial, and now I can't get it to vibrate at all....anyone have any ideas? It's annoying, I want my vibrate back!!!
LiquidHonesty said:
I have a fairly new 8525 (bout a month old) and the problem is it hardly ever wants to vibrate when I get a new mail message. It will at times, but it never wanted to vibrate upon receipt of a new email message. I just figured that's how it was supposed to be until I installed a trial of Wisbar Avanced and it had a setting for "vibrate" to turn on in it...and it worked like it should. It would vibrate anytime I got a new email, even if the screen was off, the device was locked, and i hadn't touched it in a while.
I removed the trial, and now I can't get it to vibrate at all....anyone have any ideas? It's annoying, I want my vibrate back!!!
Click to expand...
Click to collapse
Well initially you need to pin down whether it's a software/registry setting problem or the fairly commom hardware problem.
Can you reinstall the trial of WA and see if this re-instates the vibrate function? I am of course assuming that the device is set to vibrate and that currently it does not vibrate under any circumstances including when st for phonecalls.
Mike
mikechannon said:
Well initially you need to pin down whether it's a software/registry setting problem or the fairly commom hardware problem.
Can you reinstall the trial of WA and see if this re-instates the vibrate function? I am of course assuming that the device is set to vibrate and that currently it does not vibrate under any circumstances including when st for phonecalls.
Mike
Click to expand...
Click to collapse
Correct, it used to only vibrate if it hadn't been locked/asleep. With WA is vibrated as it should. Now it doesn't vibrate at all..........
I reinstalled WA real quick after you posted this to try, and yup, it vibrates like it should with it installed.
Well at least we know its a software issue. I'm using my TyTn to post this so a little difficult to do searches on registry settings for vibrate, but will check later or you could try searching meantime.
Mike
After searching the registry and such, no luck. Anyone have any other suggestions?
Maybe this is an odd question but the vibration on the 8525 is crazy long. Seems like it lasts 10sec (maybe only 5 but it seems long). Is there a way to make this a quick 1sec vibrate? I leave it on my desk at work and everytime email comes in or a txt msg it is going off.
I have turned Vibrate off which works however not the best solution as Id prefer to have it, just not going off for so long.
Thanks
There ARE people who would pay good money for that!!
@RoachForLife-
http://forum.xda-developers.com/showthread.php?p=1357059
I googled: xda-developers hermes vibration length VOILA
you know what, I read that exact thing but missed the part about Vibrate for N seconds. Oops. Thanks though!!!
I have a weird issue with my mogul.
everything is dead on it (keyboard doesn't work, no LEDs, screen doesn't display).
yet it still works over bluetooth (can recieve calls, can listen to music, well before I reset it and closed media player).
I'm not worried as have sprint insurance so it will get replaced, just wondering if anyone has any idea what might have happened?
Maybe your blacklight died?
Try using a tool to remotely access your mogul and see if maybe the settings are turned off though, try this:
http://mymobiler.com/
I thought it could be the backlight. But, the keyboard is dead too, as are all the LEDs. Only thing that works visibly is the ringer, and bluetooth. So I can recieve calls. <shrug> going to take it to a sprint store today.
You are talking about keyboard lighting or when you press a key it doesn't work?
couldn't pick up or hangup calls with phone buttons.
couldn't get caps lock or num lock leds to light up.
only thing that seemed to work was "sound" on startup (due to reset), ringer and bluetooth for picking up calls.
phone's been replaced so can't analyze it more. sprint tech guy was like "wow, this is weird, never seen this before"
Did you try to hard reset it before you took it in?
yea, couldn't. buttons didnt work. held down the 2 soft buttons and it just booted normally (got the sound, no screen)
am i the only one with this bug??? when have the phone set to vibrate, for the first ten mins or so the phone will vibrate when i recieve a text. then nothing. its like its on silent mode. if i switch to normal mode it wont play a sound either. i have to reset the phone to get it to alert me again.
i reinstalled from scratch 3 times and it still did it. regardless of what other applications i installed. i was on generic_sg, so i followed the instructions to force a change to generic_uk since noone else mentioned they had the bug. now 2 hours later ive finished the change and it still doesnt vibrate when i get a text!
the X1 had a similar problem when it first came out, was there ever a fix for it?