Ok I've pretty much tried everything, been browsing the boards for over 6 hours for solutions. I've tried everything and just flat out can not get my Bluetooth GPS to work with preetty much any software I've tried. Using the T-Mobile MDA USA model here with Windows Mobile 5.0.
I did the registry tweak and managed to get the GPS Icon in my connections section. Messed with all the settings there, no luck.
I'm using a Ambicom BT-GPS that I used to use with my IPAQ 6315. Worked flawlessly with IGuidance but no luck. The MDA see's the device, successfully pairs the device. But no matter what settings I try to use I just can't get anything good to happen here. Should I abandon the Ambicom GPS? Is it just not going to work with the MDA? Should I try other software? I'm not all about shelling out bucks for software that I'm not sure is going to work.
Is anybody out there using a working bluetooth GPS setup with the USA T-Mobile MDA? What are you using, what are you running and what hoops did you have to jump through to get it working? I don't mind spending a little bit of money if I know it's going to work.
You did not state which model ambicom gps receiver you have but have you tried the updated drivers here for wm5?
http://www.ambicom.com/support/installation/gps/index.htm
hope this helps
Sorry bout that, it's the basic 1.0 version, BT-GPS...
Apparantly they don't let me download it because I don't send them enough money. That only works with their version of the navigator which is basically the IGuidance software re-branded. I do however have the 2.1 version of IGuidance.
That may be your problem then - try to get wm5 drivers for your device - not sure where from.
I am not a gps expert but few of the readers have praised the holux 236 gps and works with the wizard - and has the new gps chip
see here
http://forum.xda-developers.com/viewtopic.php?t=44567&highlight=gps
For some reason, my first Holux GPSlim 236 did the same thing (Mapopolis this time). Surprisingly, an exchange did the trick. If you have a friend with a PDA, I'd suggest he try it too and see if it isn't a bad unit. That's the way I found out.
JB
I have had a huge problem with getting GPS software to work with my MDA... the only marginal success I had was when i got Tomtom Navigator working with my Holux GPSlim 236. At first it didnt work, and I thought I hit a road block. But I switched the outgoing Com ports and got it working. But then I realized that I only had the Great Britain maps, so i downloaded the California maps, but the software wont work. I gave up on Tomtom and am going another route. I really cant get it working. Here is the link where I got the software for Tomtom. All other programs wouldnt work because there is an incompatability with Windows Mobile 5.0. This file works. http://thepiratebay.org/details.php?id=3410079 Good luck.
Going a bit off topic (and not very helpful), but i was amazed to find out the BT Handsfree and BT GPS works at the same time
I'm dead happy to be able to talk and use TomTom at the same time. Everyone i asked said you cant use to BT devices at the same time. Great stuff.
Yes I do enjoy the fact that BT handsfree and BT GPS work in conjunction on my Wizard... really nice.
As for the original poster's issues. I use iGuidance with my Wizard (8125) and it was a bit confusing to get going at first. This is what I had to do.
1. Pair the GPS and the Wizard
2. Select the Com Ports tab and set up a new OUTGOING port, it should default to com6. I would uncheck the secure connection box as I don't think you have to have a secure connection to your GPS, but thats just me. If it doesn't work try checking it.
3. In IGuidance select the tools, GPS options, COM Port, and set it to com 6 just like it defaulted to com 6 in the settings above.
4. Tap the GPS icon and see if you have data streaming over the BT GPS connection. Hopefully you do!
I find that iGuidance is a bit strange in that it wants to hit the GPS on the port so it actively goes to the GPS it just does not sit there and wait so that makes things a bit strange. Also you most likely need the 2.1.3.2NA version on your MDA. All other 2.1.3 versions have an issue and won't display the 3D view at all on QVGA devices... its a known issue that they have fixed in this version. Annoying as the DVD did not have this version on it and I ran into the problem and was annoyed until I went to their site and found the issue fixed.
Related
:x :evil: I purchased a Leadtek wireless GPS receiver (model LR9537) and Navigator software for my IMate Pocket PPC 2003 Phone Edition device. I can bond to the GPS receiver but I cannot send or receive information - hence at the moment the software is unuseable.
I downloaded and installed the rom upgrade from the club imate website (which was supposed to fix the problem) but still no luck.
I contacted customer support in Nov 2004 and was told it would be looked in to, but to date have not got a reply from them with an answer. Frankly I am fed up with their customer service as they do not appear to be interested / able to help in solving problems of this type.
I went back to where I purchased the GPS equipment and they were unable to fix the problem. They even tried to talk with a nokia phone by bluetooth but it would not work either, so it narrows it down to being a problem with the bluetooth function.
Has anyone else had a similar problem, and if so have they been able to work a solution? I am eager to get this problem resolved and start using the (expensive) software which I purchased. Are there any patches or additonal downloads that I need to install or is it just purely a matter of configuring the device correctly?
Which navigation software are you using, what settings are you using for the gps? When you bonded the gps were you given the serial port option for the gps device?
I have the Destinator 3 software. I am not sure what setting I am suppose to use other than a baud rate of 4800 and NMEA protocol.
I also have the leadtek software that came with the GPS.
When I ask the Destinator 3 software to find the GPS it does a search and goes through the different baud rates and the different ports but comes up saying that it cannot find the GPS. The leadtek software also cannot find the GPS from its own receiver!
When I bonded to the GPS all I had to enter was a four digit pin - nothing else.
As a side issue I also find that I must not turn on the bluetooth before running an application otherwise it tells me that the port is in use. If I leave it turned off the blue light will start flashing once I start running the application.
Is there possibly a compatability problem?
My leadtek lr9537 arrived on my door step yesterday, and as yet i am unable to keep a steady BT conection to it from either my laptop or universal (in o2 clothes). The BT on the GPS seems to fall over as soon as it picks up a fix. I am also as yet unable to get a GPS signal to my pda either. I'm gonna have a good play with the settings buit it almost seems as if the BT on the device is dodgy.
i'll post back if i find more....
Hi everyone.
I am hoping someone will be kind enough (or able enough) to help me with a problem I seem to be experiencing on my XDAIIs and a Leadtek 9531 GPS receiver.
I bought the receiver from Ebay, supposedly new, and it certainly looks new.
I plug the receiver into my XDA, and power it all from the cigarrette lighter. I am using Winfast Navigator software to test the connection as I am still waiting for the Tomtom software to arrive.
The first lot of errors received were for COM1 not being available, so I have done as suggested and disabled BEAM for the device... and now the problem is that I start the winfast software, and click connect and it just stays there attempting to connect for minutes... It just doesnt seem to be able to connect to the device.
I have the device set to NMEA 4800 Baud on COM1, so presumably I have done all that I need to be able to pick up a satellite signal, but there is still nothing.
Can anyone suggest something?
Thanks in Advance.
I got this GPS receiver a while ago bundled with Destinator GPS software. This receiver can take quite a while to get its first fix (up to 20mins in my experience). Leave it turned on for a while to see if it connects. Once it has a fix, it will re-connect next time almost instantly.
I don't know if this is true, but someone told me that the unit memorizes its last known position. When you re-connect it, if it's moved a significant distance (ie just bought it), it takes a while to find the satelites because it is getting conflicting data about where it is on the planet.
Hi xda-rocks,
Thanks for posting back.
Im not sure that leaving it for 20 mins is going to work. I downloaded a GPS viewer program from http://www.holux-uk.com/Downloads/GpsViewer.exe and it refuses to acknowledge that there is anything GPS related on COM1, or any of the other COM ports for that matter.
From reading other posts it seems like maybe this is a keyboard problem (slideout model XDA IIs) which apparantely also uses COM1, but I am unsure how to disable the keyboard or even if i want to. My guess would be that I would have to disable the keyboard everytime i wanted to use GPS and that would just be too much for something that I really just want to plug in and go.
So, I have ordered a BT GPS receiver now, and am awaiting delivery of that... hopefully thats not as much bother as this one has been to setup... also hopefully the person I bought the leadtek receiver from will accept a return for refund.
I got my gps with an original XDA, then upgraded to XDAII in Sept 2003 and it worked fine, then upgraded to MDAIII (XDAIIs) in October 2004 and it still works fine - no problem with keyboard.
Works fine with Destinator and Tomtom even has it listed as one of its options.
I also have Holux BT GPS receiver, but prefer wired system when in car - less hassle with connecting, charging, headsets, etc.
I know that Garmin said that there GPS 10 is not compatible with 9100.
But I manage to make some settings so i could pair the units together.
Only one problem.. when I try to install basic map and other maps my computer wont find the device.
It says that the unit is not connected...
My Qtek S100 workes directly.. but I have just upgraded to 9100 and would like to get it to work..
Any suggestions?
Not much for help here with me, buddy.
I found that most of the gps software I had tried would not allow me to use my BT GPS...finally, Pocket Streets allowed me to set the com port to what I was able to set as the outgoing port on the 9100...it works fine....
I have a lot of useless mapping software now, and Pocket Streets isn't all that I would hope, but it will do for now...
I've heard rumors, on here, I think that TomTom will work, but I don't have that kind of money...
If you can get them to pair, that's great, but the software you use will need to be able to see the GPS at the outgoing port that you create on the 9100...
hope this helps a little.
Have spent a long time trying to get my tomtom5 navigator working on my mda and now have it all going lovely - however I cant get my bluetooth reciever to be seen by tomtom. It is one of the BT-77 one that you see loads of on Ebay - did used to have it working with my old phone but not this one?
Any ideas - cant give up now!
Thanks
ROger
I have the same problem with an xdalls with a BT338 bluetooth gps.
I can get it to pair up. Tomtom5 does not see it though. Been thru all the settings that i can thing of.... i have the blue light flashing fast and then just logs off.
Paul
I have the BT-77 (also from ebay) and it works perfectly with the TomTom 5.21 software...
I had trouble with it initially too- it's to do with setting the right COM ports.
To get things working, I downloaded and installed Pocket Bluetooth Tools:
http://www.bluetooth.jazztel.es/ Download version 1.0.1.2
Delete any existing pair that you may have with the GPS receiver...
Re-pair the device with the above software installed, and now you will get an iconic menu, use the serial port option and select an available COM port. Complete pairing procedure as per on screen instruction.
Now start up TomTom and go to GPS options in preferences- select 'other bluetooth device' and now you should see the something called 'BT on COMx' x being the port you assigned earlier of course. Complete configuration.
Wait for the receiver to get a fix and you should be ready to go.
I've used the Pocket Bluetooth Tools many times on different variants of the Magician and has work everytime.
Hi
thanks for the info - but still nothing
cant cope anymore
will buy a whole new system i think!
Thanks anyway
Roger
HELLO!
Well at last it works - not really sure why?
But I dont care it works!
thanks for the help
Roger
Hi!
Just registered to try and find out how to get my MDA II working with a bluetooth GPS and I find this thread. Thank you for the link to the bluetooth tools it seems to have worked a treat.
Cool. Glad it is working for you guys.
The software also works well with using Bluetooth and ActiveSync.
For those who don't know, Microsoft and Pharos are offering an iGPS-500 Bluetooth receiver for $70, plus shipping.
http://www.pharosgps.com/gpsphone/LiveSearch.htm?ProductID=615
https://services.pharosgps.com/shopping/store/comersus_viewItem.asp?idProduct=141
This is designed to work with LiveSearch, but I don't see why it wouldn't work with other software.
I have purchased one and I will post a review in this thread when I get it.
How did it work for you? I bought the iGPS too but I can't seem to figure out how to use it with my Wing. Do I still have to mess with the "External GPS" settings? I'm planning on using it with Windows Live Search. It connects fine, I guess I'm just a bit clueless trying to get it to work.
I purchased that keychain Bluetooth GPS reciever from the XDA store, and its pretty sweet. Its small but works well, and was even cheaper than that one above, you should consider that one too. Hey, plus you can support this great site too ;0)
http://store.xda-developers.com/xproduct.php?xProd=489&xSec=24
Just a query I am awaiting the arrival of my External B/T GPS to suit my Imate Jasjam I have Tomtom 6 installed my question is ...Is there any tricks to getting this working prior to my stuffing around with it
Hey bongo333, What I would suggest, as I use Tomtom 6 with ext, GPS reciever, is to wait to pair GPS with the jasjam before running tomtom the first time.
This allows you the option of which com port you wish the GPS reciever to use(I use 4). I believe tomtom uses as default 9 or 3. I believe your BT handsfree has com 03 reserved which means you have to use com 09.
When you get your GPS reciever, pair with jasjam but make sure you tick "serial port".
Then, from the tabs at the bottom of the screen in bluetooth settings, select com ports. click "select new outgoing port" then select port of your choice(Please remember that some com ports are "Reserved and cant be picked).
Start tomtom and when prompted select which type of gps you are using(other bluetooth reciver) then pick the com port you selected as the outgoing port for your GPS.
Please note that I have tried a 16 channel GPS and now have a 54 channel GPS and the more recievers the better reception and less time to lock onto a signal.
Hope this helps... Cheers
Excellent description I just picked it up and had it running on the way home I couldn't ask for anything better for that price $80 Ebay Holux M-1000b (for others info) exactly as you said used bluetooth prior to Tomtom and MUST assign com port or no go by the way do you know where I can get the latest Aust maps. I have Tomtom 6 but I'm told there is a newer version of the S/w but maps are more important.
Cheers Bongo333
SD5150 said:
I purchased that keychain Bluetooth GPS reciever from the XDA store, and its pretty sweet. Its small but works well, and was even cheaper than that one above, you should consider that one too. Hey, plus you can support this great site too ;0)
http://store.xda-developers.com/xproduct.php?xProd=489&xSec=24
Click to expand...
Click to collapse
What software are you using for the keychain bluetooth GPS reciever? and do you need to be connected to 3G or internet to have the software working?
Ive been using an external GPS that i got on ebay about a year and a half ago for about $60 AUD.
For maps im using Tomtom which works great.