Related
Anyone know how I can force my mini s to disconnect from GPRS after it has checked my email?
Si.
press and hold the red phone button (hang up) for about 5 seconds - you should see it switch from GPRS (small [G] icon) to 'GPRS Available' (large [G] icon)
I'd rather it did it automatically - so I can leave it alone all day and it will connect to check now and again then disconnect.
same problem here. is there a fix?
also when i have forgot to disconnect am i paying for gprs? or is it just any content i download?
cheers.
GPRS is paid for by data usage, not connection... so you can leave it connected (so long as nothing is downloading in the background!)
V
cheers vijay, but have you got a workaround for original question?
on my old c500 when i had finished getting mail it automatically switched itself off.are we missing something?
vijay... unfortunately, at least on my Qtek 9100, there's always some data sent.. very infrequently, but over a day of no activity, the GPRS Monitor application that came with it reported 200KB traffic. So I always make sure to disconnect regardless
ZeBoxx: it doesn't surprise me. At least in theory, you only pay for data transfer on GPRS, not time connected like on dialup. However, I think activesync is an unpredictable beast at bet. I never use GPRS - so for me, to ensure I'm completely disconnected I use a dummy grps account.
futuresbright: I'm working on a set of such tools, but I believe there's already a command line tool to disconnect GPRS. I haven't made one yet that will automatically disconnect after checking email. I have to work on a related app, so I will try to look into the question, but I can't promise any time frame I'm afraid
V
Yeah, the monitor comes with a little icon on the Today Screen with which you can explicitly enable/disable GPRS as well. So obviously it can be done by external software
GPRS disconnect on O2 XDA mini S
If I tap the GPRS icon on the top bar when I have a GPRS connection up, I get an option to disconnect it (and it works!). I too don't like the thought of racking up data calls even though it is supposed to be packets switched not circuit switched.
no worries vijay,thanks for your time.
will just have to remember to switch off manually for now.
I am using GPRS/ EDGE. Sometimes when I have NOT used any Internet program, the G or E icon become a pure square G or E only without the 2 arrows. Does it mean it has DISCONNTED the GPRS/EDGE? Now if I launch IE and click a URL, the E/G icon will flashing with a moving 2 arrows and eventually after 1 or 2 seconds, become a "square E/G icon with fixed 2 arrows".
I am wondering, shouldn't the GPRS/EDGE be ALWAYS connected, such that the "G/E icon with fixed 2 arrows" should always appear? What setting I should change in order to make my Xda neo perform that way?
Hi isomania!
1) The icons are interpreted as follows:
Solid G/E - GRPS / EDGE network present, but not connected.
Small G/E with moving arrows - connecting to network.
Small G/E with solid arrows - connected.
2) There is no point to keep GPRS\EDGE connected when no programs are using it, since that would only shorten battery life. If I am not mistaken the timeout on the connection cannot be changed from the device side. I know push mail function sends some data (I think 400 bytes every 120 sec) to keep the connection alive, but it kills the battery and racks up the phone bill (unless you have unlimited data).
Thanks for your explanation. But for me, "connecting GPRS/EDGE" is STILL costing some time (may be 1 to 2 seconds). so i am wondering if I can keep GPRS/EDGE connected all the time I want, so that whenever I want to check POP3 email / go to any website, then I don't need to wait the 1 to 2 seconds connection time. Now THAT'S would be my definition of "always on"
One or two seconds to establish a connection? How will you ever manage having to wait that long? :roll:
isomaniac said:
Thanks for your explanation. But for me, "connecting GPRS/EDGE" is STILL costing some time (may be 1 to 2 seconds). so i am wondering if I can keep GPRS/EDGE connected all the time I want, so that whenever I want to check POP3 email / go to any website, then I don't need to wait the 1 to 2 seconds connection time. Now THAT'S would be my definition of "always on"
Click to expand...
Click to collapse
Check the various tweaks n tips floating about, there's always a couple that will force gprs to remain on at all times. The downside isn't battery life, it barely affects that or push mail wouldn't exist. It's that eventually you will lose the signal, the connection will die and you won't notice the difference until you try to use it. Then you have to either toggle flight mode or reset the phone...after you figure out what happened. If you're constantly having to connect to gprs, you may be better served by looking for a disconnect timeout. With that, it'll get the occasional chance to reset the connection, making sure it's active. I have no idea what they are offhand and don't use them but I've come across them in the past so try a search and check the wiki.
The downside isn't battery life, it barely affects that or push mail wouldn't exist.
Click to expand...
Click to collapse
Sorry, but I have to disagree.
Maybe if you manage to somehow keep the connection without transmitting anything (not sure this is possible) the battery drain will be minimal.
I am using push mail on my Jamin for only 3 days and the difference in battery drain is very noticeable. In fact even with no mail (I don't sync the rest) to transfer the battery life is cut almost in half.
I read an article where the same is reported for the universal.
i have a question about this related topic, i'm a noob, just got my mda on wed and i called them and added the data plan to my existing line, the guy said it would take about 72 hours for the browser to be surfing the web normally, well today is sunday and i still can't surf, my G icon on top is with arrows moving, and it shows i'm connected to EDGE but my browser only says Locating and never loads anything, please help?
Hi werkmeister47!
Arrows moving means GPRS is trying to connect, but not actually connected.
There are two possibilities:
1) The provider hasn't connected you yet (72 hours??? When I bought a SIM from Orange I was surfing in 5 minutes)
2) Your connection settings are incorrect. You have to contact technical support for exact settings for your network.
Good luck.
I currently have the Cingular 8525 and recently went down to Baja for a week. I had the phone function on to let me know when a call came in and then would go to the local internet cafe, switch the phone function off using "flight mode", confirmed phone function was off in "Comm Manager" and looking at "Settings/WLAN Settings" for the WiFi establishment.
I would then use Skype on the WiFi network to make calls back to my cell phone carrier to retrive messages.
Upon returning to the U.S. and reviewing my usage on the Cingular Web page I find that I have "Roaming Data Charges" to the tune of about $120. I have talked to Cingular and they were perplexed as to how the data charges were incurred if the phone funciton is turned off. HTC technical services were equally perplexed. HTC came up with the solution of pulling the sim card out to totally disable the phone function while still allowing WiFi access. In the states I have unlimited data access so this is not an issue, but since I travel abroad frequently, this could get costly without a simple solution (pulling the sim card out each time is not a simple solution).
Is there anychance that one of the following apps are allowing my phone to indicate that the phone is in flight mode (phone disabled) while still broadcasting in GSM/UMTS.
All thoughts on the subject are appreciated
Phone: Cingular 8525
Apps: PTTfix.cab
BandSwitch.Arm4.cab
Not sure if this helps, but after a couple of rediculously high months of data usage on my Orange UK contract, for two months I did not use any data features on the phone unless it was docked with my laptop, using it's broadband connection to browse on the phone. The opposing arrows signal was showing, signifying that my tytn was using the laptop's connection. My bills still show high usage, I had NoData running, blocking all Gprs usage.
Is it possible for the sim card to be still recording the data transfer and wrongly charging me for the usage? I have tried speaking to Orange about this but each time they have not understood what I'm talking about.
I'd sugggest you to try Spb GPRS Monitor.You need to play with it to tune it right way. It allows to monitor up to 5 different connections, and have a Today plug-in and an indicator in the top bar to show the activity. It helped me a lot by signalling that my phone uses GPRS instead of WiFi (no, I never even heard of GPRS/UMPT in flight mode!).
I have it set up to monitor GPRS for two SIM cards I have, connection via USB and BlueTooth. For any other type of connection (incl. WiFi) it does not indicate anything. Quite enough for troubleshooting, and also to understand your bills.
Probably there are similar apps, I never tried them.
Thanks for the suggestion on SPB GPRS Monitor.
I put the SPB GPRS Monitor on the phone and low and behold apparently any time the system kicks into the GPRS data mode, and it seems to do this on its own every once in awhile you get charged for the link whether you use it or not. SPB GPRS Monitor does a good job of letting you know if your not paying attention to the Martini Glass icon up top.
My phone constantly transfers data eating up the battery. I manually turn off data on the comm page. It stays off briefly then begins again. Any ideas?
Try this file, unzip, transfer over, install, open NO GPRS from the programs menu and hit toggle.
That should do it, just hit toggle to re-enable.
This is posted elsewhere, try using search first.
go to activesync, menu->schedule
and set "peak times" and "off-peak times" to "manually"
I once had this when I had an MMS trying to download. Delete the MMS header from your mailbox or specify the network/connection which should be used for downloading MMS.
clarksdv2 said:
My phone constantly transfers data eating up the battery. I manually turn off data on the comm page. It stays off briefly then begins again. Any ideas?
Click to expand...
Click to collapse
Check the MMS...
But the big question is... do you have push mail or perhaps a weather program?
Push especially will keep your data connection on as it is constantly polling your email...
The good news is if your are connected it doesn't necessarily mean that you are using data. If you are in a 3G area then an H icon will appear instead of the 3G icon while there is a data transfer...
If you want to stop it alltogether check out MoDaCo's NoData or the GRPS above..
No push email or other data service
I have my personal email on 30 minute retrieve increments other than that I have no other data services. My phone is just on this constant data call although no data is being transferred. This subsequently drains my battery awefully fast.
well, what is exactly the problem? is it that your pda
"is just on this constant data call although no data is being transferred"
or
"constantly transfers data" ?
More details.
The phone is engaged in a constant data call represented by 3G with the left and right arrow, however, no data is actually being transferred. The battery is draining within 8hrs on standby because the high transmit to receive ratio. Although no data is transferred the radio constantly interrogates the cell site thus throwing out unnecessary power. If I manually disengage via the communication manager, the phone will hang up the data call for a brief period, but will reengage fairly quickly. I can't find any settings that would create this situation. I downloaded the program in this post, but the phone still continues the data call. This has never happened on this phone until a month or so after installing the ROM flash with WM6, but I can't be sure if there is a direct correlation with the new flash. Thank you all for your help.
clarksdv2 said:
I have my personal email on 30 minute retrieve increments other than that I have no other data services. My phone is just on this constant data call although no data is being transferred. This subsequently drains my battery awefully fast.
Click to expand...
Click to collapse
try turning off this 30 min email and make it manual to see if this is the cause...
not sure if u have htchome weather, because it will also auto update every few hours...
http://wiki.xda-developers.com/index.php?pagename=My Pocket PC keeps connecting to the Internet.
have you checked the activesync schedule time?
furthermore goto commmanager and disable direct push. if your commmanager does not show you the icon to disable direct push, install schaps advanced config and activate there the icon.
i am pretty sure that one of these two options causes the problem.
what other apps have you installed?
if all this does not help, hard reset your device and install/config one app after another.
Same Problem
I've got the same problem. I'm using the default HTC WWE ROM. At random times, sometimes twice a day, my "Rogers Internet" data connection (GPRS, EDGE or 3G) connects automatically and doesn't disconnect. If I catch it happening and click cancel, it tries again. It will not give up until the connection has been established for at least 10 seconds.
I've gone through every program I have, checking to make sure the auto update option is disabled (if there is an auto update). I do not use the direct push and therefore, activesync schedule is greyed out.
Any ideas?
I'm suprised that it drains your battery so quickly. My phone stays connected at least 90% of the day, and I usually have at least 70-80% battery when I get home from work, usually more. The only time that it gets drained quickly is when I'm browsing the web too much on NetFront 3.5...a notorious battery drainer.
Sorry I couldn't help...but maybe it's a battery issue? Since I'm connected so much and have no battery issues? Or maybe a radio change could help you?
I don't have any abnormal battery drain, just weird auto-connect problem.
are you sure you have checked every single program? there has to be something that's trying to connect to the internet to grab data. weather apps, time sync, quickgps (i know, ridiculous, i'm just throwing it out there). try looking at what processes are running in the background using a task manager. that might help you eliminate suspects.
I have Spb GPRS Monitor on my phone. I've been looking at the logs. There is no pattern to the connections and they seem to be never more than 20k connections. I've installed NoGPRS and will use that while I'm sleeping. Just weird that it connects at all.
I had a similar problem, so I installed KaiserTweak and changed the setting to disconnect from 3G after use and that did the trick for me - no more constant connection and the battery stopped heating up and dying quickly.
I'd like my phone to use the data connection to download weather info etc., but I'd also like it to turn it off when idle to save power. Is there an app to do this?
thanks
Click on the 3G icon on the top bar, then when the notification screen opens click on the 3G icon again, that opens the Comm Mgr screen, turn off the data connection.
OR, are you wanting an app that will do it automatically after XX min?
It should automatically disconnect after usage. I find my data connection active for like 23 hours and such. Big battery hog when it isn't even being used.
On my Fuze, there was a registry edit which would set your END key to disconnect a data connection while on the homescreen in the default position. Worked really well except it doesn't work on my new AT&T Pure for some reason.
A single tap would work exactly like the END key currently does. Pretty nice.
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:0000000A
Flags2: "Enables a disconnect button for GPRS connections to appear in the connectivity list. Also enables End key to disconnect GPRS."
[EDIT]
Actually it may still work. I just found that further down in my app.reg of my Custom folder, I had it set again, to 16.
[EDIT2]
Yup. Changing the value to A (A=10) works like a champ. It doesn't affect any normal End key functions either.
Alternatively, if you have TD2 Tools (which you should, great program), then under the Power tab, there is an option to 'Auto D/C Data Connection'. At least there is in 2a, v 2.0.3552.42948.
Yes, I want an app to disconnect the data connection after a few mins/secs. It should save power.
I will try the TD2 tools, I already had it but never thought about looking if it had this option built in.
Thanks to you all!
EDIT: It worked, it disconnects after a few minutes now. Does anybody know how to disable wake device when receiving SMS? The option is turned off, but still the device wakes itself.
arrow224 said:
Alternatively, if you have TD2 Tools (which you should, great program), then under the Power tab, there is an option to 'Auto D/C Data Connection'. At least there is in 2a, v 2.0.3552.42948.
Click to expand...
Click to collapse
player911 said:
It should automatically disconnect after usage. I find my data connection active for like 23 hours and such. Big battery hog when it isn't even being used.
On my Fuze, there was a registry edit which would set your END key to disconnect a data connection while on the homescreen in the default position. Worked really well except it doesn't work on my new AT&T Pure for some reason.
A single tap would work exactly like the END key currently does. Pretty nice.
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:0000000A
Flags2: "Enables a disconnect button for GPRS connections to appear in the connectivity list. Also enables End key to disconnect GPRS."
[EDIT]
Actually it may still work. I just found that further down in my app.reg of my Custom folder, I had it set again, to 16.
[EDIT2]
Yup. Changing the value to A (A=10) works like a champ. It doesn't affect any normal End key functions either.
Click to expand...
Click to collapse
Are both working on a TD2? I mean either the registry tweak or the TD2 Tool?
I personally prefer the reg tweak, however I don't understand the content of your EDIT note: "changing WHAT to 16"?? and your EDIT2 note : "changing the value to A" is in hex or dec? And do you mean that pressing the END hardware key will disconnect data connection now?
Hi
The data connection being on does not drain the battery. You have a network connection to the cell all the time otherwise you wouldn't receive phone calls, the data connection symbol just means your phone also has an IP address, that doesn't take any power.
If anything the connection remaining on saves power as each time you need a connection one doesn't have be created. Creating a connection uses more CPU cycles and radio power talking to the cell to open a network connection and then more to drop it.
The network operators also want the connection to remain on as it is less load on their networks than having them continually created then dropped.
More info here: http://blogs.msdn.com/windowsmobile/archive/2006/07/14/666203.aspx
Regards
Phil
you just need to modify these two entries (was written here many times)
Hkey_local_machine\Comm\ConnMgr\Planner\Settings
1. Change in CacheTime DWORD Data to 15 (Base is Dec value)
2. Change in SuspendResume the value to GPRS_bye_if_device_off
Make a soft reset.
The data connection should turn off after 15 sec if idle. It should also turn
off after you press the red key, or turn off the screen.
Try it.
Both solutions (reg mod and TD2 Tools) work most of the time, they are in fact the same. However I noticed 2 curious behaviours in which the timeout is not respected.
1) When I update weather via DataConnection, it does not autodisconnect after the preset time...it will when device goes in standby mode.
2) Data Connection stays on until Opera is open (even if not used).Once closed, timeout starts, and it's not that bad after all.
Can anyone confirm?
I used the TD2 tools, and i'm not experiencing these issues.
PhilipL said:
Hi
The data connection being on does not drain the battery. You have a network connection to the cell all the time otherwise you wouldn't receive phone calls, the data connection symbol just means your phone also has an IP address, that doesn't take any power.
If anything the connection remaining on saves power as each time you need a connection one doesn't have be created. Creating a connection uses more CPU cycles and radio power talking to the cell to open a network connection and then more to drop it.
The network operators also want the connection to remain on as it is less load on their networks than having them continually created then dropped.
More info here: http://blogs.msdn.com/windowsmobile/archive/2006/07/14/666203.aspx
Regards
Phil
Click to expand...
Click to collapse
This is good advice. Has anyone every experienced more battery drain if the the data connection is "left open"?
In any case, even if you "disconnect" data every time, if an app wants to access the internet, doesn't wm reconnect automatically again? (unless you use modaco "nodata" app or similar to inhibit it)
Didn't notice more battery drain with a data connection left open and you're right: if an app needs connection then it will automatically be opened. In my case I want auto disconnect because, even though I have 400 monthly prepaid connection hours, which is enormous for a phone, it annoys me to waste them while topaz is in my pocket.
Wow, thaks for the great tip Phil!
I have a prepaid 150MB limit, so it shouldn't bother me leaving it on. The 400 monthly hours sualc mentioned is indeed more of a problem.
BumAround said:
Are both working on a TD2? I mean either the registry tweak or the TD2 Tool?
I personally prefer the reg tweak, however I don't understand the content of your EDIT note: "changing WHAT to 16"?? and your EDIT2 note : "changing the value to A" is in hex or dec? And do you mean that pressing the END hardware key will disconnect data connection now?
Click to expand...
Click to collapse
The problem mentioned above, about auto-disconnecting when programs are being used... this is why I program my reg edit to manual disconnect.
@BumAround: Set the value to "0000000A" (which is hex). "16" was my default value, which was also Hex.
This will do 2 things. It creates a "Disconnect" button from the PopUp Connection window and also allows the END key to disconnect only while at the Today screen in it's default position.
For example, if you are browsing Opera and press the END key... it will only take you back to the Today screen and won't touch your data connection. If your at the default position (the Clock tab on both Manila and Titanium), pressing END again will stop the data transmission.
It is a very good solution to the OP's problem by allowing you to disconnect the data connection easily, at will, and without the need for extra programs.
player911 said:
The problem mentioned above, about auto-disconnecting when programs are being used... this is why I program my reg edit to manual disconnect.
@BumAround: Set the value to "0000000A" (which is hex). "16" was my default value, which was also Hex.
This will do 2 things. It creates a "Disconnect" button from the PopUp Connection window and also allows the END key to disconnect only while at the Today screen in it's default position.
For example, if you are browsing Opera and press the END key... it will only take you back to the Today screen and won't touch your data connection. If your at the default position (the Clock tab on both Manila and Titanium), pressing END again will stop the data transmission.
It is a very good solution to the OP's problem by allowing you to disconnect the data connection easily, at will, and without the need for extra programs.
Click to expand...
Click to collapse
Wow! Cool! You mean pressing END (hardware) key twice, once to bring the phone to the Today main screen, and one more time to disconnect data connection at will? Sweet!
Hi Sualc, the same "problem" for me updating weather (using option for data connection inTD2 Tools)
Not sure
PhilipL said:
Hi
The data connection being on does not drain the battery. You have a network connection to the cell all the time otherwise you wouldn't receive phone calls, the data connection symbol just means your phone also has an IP address, that doesn't take any power.
If anything the connection remaining on saves power as each time you need a connection one doesn't have be created. Creating a connection uses more CPU cycles and radio power talking to the cell to open a network connection and then more to drop it.
The network operators also want the connection to remain on as it is less load on their networks than having them continually created then dropped.
Regards
Phil
Click to expand...
Click to collapse
Not sure about this... and forgive me if I shouldn't be commenting because I'm referencing a cdma HTC touch pro 2, but I think this aspect is common.
My understanding is that the arrows up in the status bar should show white when a data connection is active and transferring data, but should turn gray when the connection is connected but not actively transmitting data. On my TP2, the data connection always shows the connection active and transmitting (the arrows stay white and never turn gray). I'm thinking if this is happening, one must surely be eating battery that isn't necessary.
On a cdma phone, the GPRS registry setting that is mentioned in this thread won't work because, although it will make the data connection automatically disconnect after an active data session, and you can change how long that time is with the CacheTime registry setting, unfortunately, on my HTC touch pro 2 Sprint cdma phone, you can't answer incoming calls when a data connection is active using these settings. I have to change the GPRS setting to #777 instead to be able to answer incoming calls when a data connection is active.... and with the #777 registry setting, I then loose the automatic time out and turning off of the data connection, so it stays on and showing active unless I turn it off manually and even then it comes on by it's self so often it's not even worth turning it off manually.
If any of you tech wizards can find a way for me to both be able to answer incoming calls when the is an active data connection, and also have the data connection time out and turn off automatically when not being used, I'd love to see it, because it sure seems to me I use more battery when I'm not turning off my data connection a lot manually, but it gets old always having to turn it off too!