Wifi & Bluetooth simultaneously - 8125, K-JAM, P4300, MDA Vario General

Hi,
Does anyone else attempt this with their MDA Vario?
Blue tooth enabled and communicating incar with Parrot CK3100 - works fine, bt always enabled, and pairs with parrot on entering the car and switching on ignition.
Load up tomtom5 - bluetooth connects fine to GPS aswell as parrot & can use gprs to retrieve traffic updates.
Enable Wifi to attach to an 80gb incar wifi hardisk, and use tcpmp to play music from it through car stereo via stereo jack.
Problem seems to be the bluetooth keeps dropping out regulary while the wifi is active - ie the tomtom will lose gps connection, and regain it a few minutes later, or the parrot will display disconnected then reconnect a minute later. Disable wifi and it seems to behave itself (but obviously no music)
I have an Ipaq 5550 which had been using the wifi/blutooth for all the above simultaneously (and still can), which I want to replace with the wizard.

incar 80GB HD!?!
Hey Paul,
I don't know the answer to your problem (yet).
But what harddisk do you use in your car to connect over your Wizard? I have a Parrot 3100 also and love the idea of playing my music wireless in my car.
Hope you can advise me.

Asus WL-HDD2.5 + 80gb disk, powered via a 5v2a camcorder carcharger (the normal 1amp accessory socket chargers don't have the power to start up the disk).

Related

2 bluetooth connections at same time?

Looking for a quick reply here. I'm considering getting a bluetooth car radio and need to know if my exec can be connected to it (as a hands free phone) as well as to my BT-77 GPS bluetooth reciever for my TomTom 5 sat nav application - at the same time... The car radio i'm considering is the Pioneer DEH-P55 or DEH-P70 series.
Is it possible?
Thanks in advance.
i don't know if it will work with you, but i used to connect my jasjar to my pc as AS and DUN at the same time, with my jabra bt500 connected to it simultaneously.
I use a Parrot Car kit (or Bluetooth Headset) at the same time as a BT77. So as long as your radio supports the "handsfree" profile, I don't see why it shouldn't work.
Cheers,
Steve.

Simultaneous Bluetooth Connection Use

Hi,
I was wondering, is it possible to use bluetooth car kit on a Wizard at the same time it is using its bluetooth connection to talk to a bluetooth GPS dongle (Holux 236)?
TIA
i use a parrot car bt car kit and the same holux gps receiver sometimes at the same time and have no problems.
I also use a Holux 236 and talk with my earpiece at the same time. I haven't had any problems yet.
Nice one, thanks for that.
This should be perfectly possible.
The Bluetooth standard v1.2 allows a device to connect to multiple devices via bluetooth at the same time.
Not sure on the exact specs, but can imagine the device time splitting data from multiple devices with certain connection types having different priorities?!?!
So, having a BT Headset and GPS at same time - headset device should be ok, but GPS data may be slower to update....
Thanks again.

Using more than one BT headset doesn't work

I've got a BT stereo headset (HTC S100) and also BT in my car (Ford). I'm not trying to use them simultaneously (no point), I just want the headset to work properly when I'm using that and then when I get in my car I want the Tytn to connect to my car BT and to work properly with that. At the moment if I want to use my headset I have to go into BT settings and untick "Handsfree" for the car BT device and soft-reset, then I have to do some tinkering on the headset and make a phonecall before it will kick in and behave. Then when I want to use it in my car I have to DELETE the headset from my BT devices (unticking the boxes is not enough), check the "Handsfree" option under the Ford BT device and then soft-reset before it will work.
Why the hell can't the phone just use the headset properly when that's on and connected and then when I'm in the car use the Ford BT properly? Why does having two devices configured interfere with eachother when they're not actually being used simultaneously?!! It's ridiculous, I reckon it's the MS BT stack, what a load of $hite!
Any ideas what I can do? I've tried the JETware handsfree extension, has made no difference.

Multiple Bluetooth Devices

I have a Nike and also got a Jabra BT3030 bluetooth headset and a Freecom keychain GPS.
When the GPS is connected and I turn on the headset, the GPS drops out, is there a way to have them both running together?
Thanks
Jonny
I use a Dual too, and in my car I have:
Parrot hands-free (BT)
GPS receiver (BT)
Each time I enter my car, the parrot detects and connects to dual, and the GPS conects either.
Even when I am in call the gps continue to refresh without problems
It works with my other bluetooth head set but this jabra one is a stereo headset with hands free.

Bluetooth auto-reconnect after out of range on WM6

I have TRINITY with WM 6 and 2DIN car DVD/RADIO/TV/GPS/BLUETOOTH, I paired them by bluetoth connection, everything works good. But when I go outside the car or turn off (to standby mode) one of devices and next go back to the car - these two devices cannot reconnect automatically. I must turn off BT in my phone and on again to repair connection. It's not comfortable to do this with every move from the car. The car set is WINCE5 core system.
Is that any way to solve this problem? I heard that it's a fault of WM6 - WM5 can autoreconect BT connection. Is that true?
bigfoot

Categories

Resources