i have a qtek 9100. i try to connect with my bt gps receiver with IGO (navigation software) and it doesn't work. in config menu i have only 0, 1,2,3,4,9 com ports. Gps receiver works on com 8.
the same configuration on a hp ipaq 4700 works just fine. in config menu detects all com ports from 0 to 9.
why i don't have com 8 on qtek 9100 ?
also in resco file explorer i don't have send to bluetooth option. on my hp 4700 i have that option.
Hi florin83,
I've the same problem as yours on a QTEK 9100 (Wizard), but with a Navigon Navigator 4 software and Navigon GPS BT receiver. Then it doesn't works with different GPS softwares (and/or receiver?)...
Did anyone find a solution for these BT COM Ports problems ?
Thanks
Related
Hi, I have a brand new XDA Mini, but with Qtek S100 WWE Rom 1.12, and I bought a Bluetooth GPS, Xaiox NAVOne 2.0...
Bluetooth manager can see the gps without problems, but my Medion2004 Navigation Software says, no GPS is avaiable.
I've already read in the users manual, that GPS needs Com8.
As I see in Start -- Settings -- System -- Bluetooth settings, xda mini has Com5 for outbond port, and Com4 for inbound port.
How can I change ? No program is running, if I check.
Please, help me, thanks.
Nobody has a good idea ? I have already tried the Pocket Bluetooth Tools, it can give a solution, to change COM port 5 to COM port 8, my bluetooth gps requires this port.
BUT, this screenshot appears only a small moment (0,1sec) when I install NAVone2.0 gps...
I installed this gps 100 times, everything is the same.
Can you suggest me another bluetooth tools application?
The problem is simple, to change COM 5 to COM 8.
Thanks in advance.
You could try installing gpsgate from franson
http://franson.com/gpsgate/
change software!
I think you should try change software. I have tomtom 5 to my s100 and it works just fine..
Hi,
I have managed to install my old Tomtom navigator 224 on a qtek 9100. Everything seems to work except that I cant select my bluetooth com port in the GPS application.
My GPS can be connected to virtual bluetooth port com 6 or 7, but I only get to choose Com 0, 2, 3 and 9 in the Tomtom GPS application (v. 209).
If anyone know of a way to either list com7 in the GPS application or a method to assign com9 to a bluetooth serial port I would really appreciate it if you could share it with me.
In the old days on my Qtek 2020 there was a trick where one could install a Widcomm bluetooth stack - but I am not sure if this is possible on this device...
Regards
Lorents
i have similar problem..
please let me know if you find a solution...
Did you install the TomTom 5.21 update? v5.0 isn't completely compatible with WM5 and won't list the bluetooth ports
i don't need tomtom. I use igo (navigation software)
you need to enable the "gps settings" icon in settings, then you can create a temp com 6 port which will show up in tomtom gps settings as a new choice of port.
will find you the link, unless someone else finds it quicker.
found it
start from step 3 for enabling gps icon
http://forum.xda-developers.com/viewtopic.php?t=28386
Requirements
i-mate kjam
storage card (> 512MB)
Destinator 5 and the english patch available at http://www.destinatortechnologies.com/en_US/support/faqs/destinatorpn.html#Install5
To overcome BT issues (which the patch above is meant to accomplish) I use GPSGate from Franson http://franson.com/
Configuration
1. WM BT configuration
New outgoing port on COM7
2. WM GPS Control Panel configuration
Software Port on COM7, disable hardware and sharing
3. GPSGate port mapping from real COM port, COM7 (had to type this in manually as only COM3,4,9 were shown!) to COM8.
4. Destinator 5 configuration. Use COM8.
Works - but my WM5 device crashes a lot!
Adam
Hi
I Got O2 Xda Wm 2003,tomtom 5,bt 77 Gps The Problem Is:
I Cant Stablished Contact With A Gps Cos I Got No Port
On Pda Bluetooth Setting.
On The Pda Setting I Got>bluetooth Setting>mode>on>off>
Discoverable ( No Ports As Com 2,6,9...)
And On Tomtom Gps Setting I Got,
Gps Is Connected To:
Infrared Port
Bt On Com6
Serial Cable On Com1
Com9
Com2
Serial On Usb.
How To Add Com Ports In My Pda
Tnx For Your Help
ITS WORKING 100%
I GO IT WORK
Hi,
I have the same problem - no virtual COM port - how did you make it ?
I tried every setting in TOM-TOM and nothing changed. Please help me.
TOMTOM AND GPS
The XDA II comes only with support for BT headsets and ActiveSync through BT. The serial port emulation is also a feature of the Microsoft BT stack but you need a device driver a register port and to handle it
AND ITSOCKET BLUETOOTH TOOLS
I Have a Socket BT GPS. It works fine with Qtek 9090 with Broadcom BT managment and tomtom 5.21. With TyTN I can pair, I can see the service (Serial port), I can configure the serial COM. Tomtom can see the port (if I choose COM0, Tomtom see Com0, COM4...Com4.... etc). But Tomtom not communicate with the GPS... no GPS connection.
On Qtek 9090 I can "connect" manually and the blue light of GPS start to flash. With TyTN the light remain fixed... as no connection. But I can discover it, pair it...
Any Idea? Maybe no WM5 compatible?
Thnx, M.