Related
What is this process and what does it do? I found it in \Windows and it's size is 91600 bytes (89.4k). It is nowhere as Autorun or a startup service, yet it starts everytime i turn on the phone. I kill it manually.
If i kill the process, nothing bad happends, everything works, and even better, some lag disappears.
Any1 knows what it is??
See http://forum.xda-developers.com/showthread.php?t=401984&page=6.
I would suggest you start from this page, because of the following quote:
====
HTC had no reason to include an application it their ROM if it wasn't needed.
The application is used wherever a "cube-like" action is requested.
For example kill biotouch, go to your mail and swing left to get to the next msg..
BOUM, phone freeze, soft reset.
At least this happened to me with a 1.93 ROM
===
Killing this process makes the X1 a lot faster on the WM GUI level! No crashes, no freezes, evereything seems to work as normal. So what is it for on the X1?
The only thing I noticed, that PocketBreeze doesn't show the messages on the message tab after killing the process.
on biotouch depend some gestures but you can live without them
Killing biotouch seems to have really given my X1 a kick up the a**! More responsive, task manager shows 5-6% usage now. Nothing seems to be missing either. Eraly days thou, I see how it goes..
When I open and close the screen switches to landscape a whole lot quicker too!
One question on my mind "Whats the catch?"!
Silly question, but how do i see my processes?
Install this task manager on your X1..
Try disabling biotouch.exe
If it gives you an improvement then install this to stop biotouch.exe from starting the next time you restart your X1.. Make sure biotouch.exe has been stopped in the task manager before running this.
It controls finger scrolling through emails etc. and for me I couldn't live without. If you don;t need this then should be fine to kill.
so it only controls scrolling? nothing else?
finger scrolling up/down or left/right (to go to previous/next messages) also?
would killing biotouch make it not work on the screen, but would i still be able to go left/right on the optical pad?
disabled biotouch and still have finger scrolling everywhere, don't have any difference, just less memory consumption an maybe a bit more speed.
I have the normal task manager, but can't see any program running.
Do I have to install the task manager cab from the first page?
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
dogans said:
I have the normal task manager, but can't see any program running.
Do I have to install the task manager cab from the first page?
Click to expand...
Click to collapse
Yes. It runs just like Windows Task Manager highlighting programs running in the background and giving you the option to 'Terminate' (End Task) an application.
I notice that if I have a large html email and use "tap to scroll right" option it starts biotouch.exe.
If the fix is installed to stop biotouch then the phone crashes. So either dont scroll right in the emails or I just remember to kill biotouch once im finished.. Although I get a lot of email I personally dont need to use the scroll right function very often..
holdout said:
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
Click to expand...
Click to collapse
in this case, biotouch is impt
holdout said:
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
Click to expand...
Click to collapse
Didn't know my fingers were that powerful
holdout said:
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
Click to expand...
Click to collapse
Make thes sticky somewhere
Hi,
All my applications have a Landscape orientation with hard buttons of my HD2 on the Right.
Is it possible to change this orientation to have Landscape orientation with hard buttons on the right, for all applications?
Or, is it possible to change the orientation for only one application, say TomTom?
by advance, thanks for yours answers.
I think it makes a lot of sense to have hard buttons on the left (I guess you made a mistake in your question). There are at least two reasons:
1. When typing, left thumb covers light sensor, so screen is dimmed.
2. Arrow keys on landscape keyboard are on the right side. Now you have to reach across both them and hard keys, with your right hand. If rotation was 90 degrees, keyboard would be more centered, so all keys would be easier to reach.
I tried searching the registry, but without success. So, I'm looking for the same thing. How to change UI orientation so that phone can be used in right/clockwise landscape orientation?
d4v0r said:
I think it makes a lot of sense to have hard buttons on the left (I guess you made a mistake in your question). There are at least two reasons:
1. When typing, left thumb covers light sensor, so screen is dimmed.
2. Arrow keys on landscape keyboard are on the right side. Now you have to reach across both them and hard keys, with your right hand. If rotation was 90 degrees, keyboard would be more centered, so all keys would be easier to reach.
I tried searching the registry, but without success. So, I'm looking for the same thing. How to change UI orientation so that phone can be used in right/clockwise landscape orientation?
Click to expand...
Click to collapse
I agree with this post. I would like to know how to change the screen oritntation clockwise so the sensor is on the upper right corner when you are using it.
Will you love the hardware keys or Virtual keys(Galaxy Nexus)
I love virtual Keys
Desition here was quite hard, because both have their pros and cons, for example oftware keys eat up your screen space and since SGSIII will use amoled screen signs on buttons would burn in to the screen and we would have burned in virtual buttons while playing games for example...on the other hand HW buttons make bottom bezel larger, and they are not suggested from google on ICS....
....if I pull line here, i dont actually care...Why not?
Since samsung already rumored that desition was very hard, i guess HW buttons will have same functionality as software buttons, so it seems that we wont have "cool" software buttons, but we will have more free space on screen
I love s/w keys than h/w keys
Actually when we watch videos and slideshow it will hide automatically
Very easier to use.
I love s/w keys in galaxy nexus
I like virtual keys on my tablet
When I flashed Gummy on my D2, i enabled the virtual keys and always ended up sliding and hitting the home button, so even though it doesn't bother me, i like both but used to hardware; i just like how you can edit the virtual keys
Definitely Software keys!
1. Allows for maximum screen size within a smaller phone shell
2. When the keys are not needed, we will get more screen real estate
3. With roms, we will be able to choose what buttons we want. Menu, search, recent apps, etc.
HW button more prefer for S3
Of coz hw button so that i may avoid accidentally push button like home button as ive ever experienced with gnex.....
I love the soft keys of my Galaxy Nexus. They change direction when the screen orientation changes. They eat up screen space, that's why I made them tiny and almost transparent with the Codename Android rom.
I love the extra screen space, I feel like I upgraded my device to one with a bigger screen. The Navigation Bar is now about the size of the status bar, and I almost never miss the buttons with my finger.
i hate virtual keys.eats inch from the display i dont want them at all
alexanter the great said:
i hate virtual keys.eats inch from the display i dont want them at all
Click to expand...
Click to collapse
Same here. I really don't see the advantages to them aside from being customizable. But what can you really add aside from the standard 4 already being used on GB.
gaspernemec said:
...on the other hand HW buttons make bottom bezel larger
Click to expand...
Click to collapse
And the Nexus is what? Bezel-less? It has more than enough space below the screen for hardware buttons. They could even make the space smaller and there would still be room for hardware buttons.
The OONLY reason to go from Hardware buttons to Software ones (a la Gnex) is to cut down the bezel and overall phone size, which means you can have a larger screen-estate.
I know for a fact, this wont be happening.
So if Samsung chooses a Virtual or Hardware buttons the overall size will be the same.
But then, why give up the tactile satisfaction of hardware keys?
No reason !!
I've simply handed my device to many people, lets say after a Youtube clip loaded, and so many times they grab the Capacitive "Back" button which means the whole video must load all over again. This is particularly annoying when you have bad reception/slow connection.
So Samsung, make all 3 hardware buttons (stylish, slim, clicky etc) or Shave off that bezel so that the screen gets larger without the phone getting larger. Ball's in your court
mattdm said:
And the Nexus is what? Bezel-less? It has more than enough space below the screen for hardware buttons. They could even make the space smaller and there would still be room for hardware buttons.
Click to expand...
Click to collapse
You know the sides like the outer edge the smooth part on the outer edge or like on a watch the.ring surrounding the watfh none of that
Sent from my SGH-T989 using XDA
I prefer capacitive keys if it include the dedicated menu key. Otherwise give me virtual keys so I can mod one in there.
I still don't trust that menu works right in all apps with ICS so I prefer to have one in all cases.
Definitely virtual keys. Don't really like the white glow of my SGSII's hardware keys.
No more hardware key, please! I couldn't stand the feedback of GS2 hw key. It's okay at first, but when time goes by the feedback got worse and eventually I was able to hear a tiny clicking sounds when pressing it. Such a fragile spot of an expensive device.
I like virtual keys. I can set up its count, color, etc. Small but nice feature.
if the phone doesnt have virtual buttons i will surely go for galaxy nexus
1. Get a phone with capacitive or virtual buttons
2. Install Temple Run
3. Play the game and swipe down
4. Accidentally hit home button
5. ???
6. Profit!
Or something like that. I absolutely hate my Huawei Ideos X5s capacitive home button. So I'd like to have capacitive multitask-button, hw home button and capacitive back-button. I'll buy it either way. I've been missing Samsung so much after I swapped my SGS2 to Omnia W and then ended up using my backup phone (Huawei) until SGS3 comes.
I had a huawei x3 with soft keys. Total crap! Too many accidental clicks.
Hardware home Button + menu key + back key
Sent from my GT-I9100 using XDA
I have used SGS and SGS2. I am used to hardware keys so I would love to have it. I can make practical use of home key, like taking pictures or putting whatever shortcut I want. I am sure samsung will stick to the hardware keys.
I know there are some roms with modified launchers that move the soft keys to the side but is there anything that moves them to the side in any/all landscape apps. 16:9 is too narrow to begin with (hell, even PC monitor makers knew 16:10 is better when you have OS chrome taking up space) but when you also leave the damn buttons down there on the bottom it's damn near unusable in that orientation.
If you're like me and you don't really like the soft-keys, you should also like this workaround. So I absolutely dislike having to press the physical home button especially since I'm coming from a history of Nexus devices and the fact that it throws off the balance of the device annoys me. (Yes, I know it's an extremely shallow problem haha)
My workaround was to use on-screen buttons. However, the screen is already 5 inches so I didn't want to use any screen real estate for buttons. Came across an app called All-In-One Gestures that lets you create gesture actions. If it's something that sounds interesting to you, you should give it a try as it makes navigating much more intuitive (opinion, of course).
My setup is currently a swipe up from the bottom of the screen in the middle for home, swipe diagonally from the left edge for back, and swipe diagonally from the right for multitasking. So if I'm using it left handed, a swipe will go back and a touch of the closest button will be multitasking, and if I'm using it right handed, a swipe will open the multitasking tray while a touch to the closest button will go back. It's proven really efficient for me!
devon4786 said:
If you're like me and you don't really like the soft-keys, you should also like this workaround. So I absolutely dislike having to press the physical home button especially since I'm coming from a history of Nexus devices and the fact that it throws off the balance of the device annoys me. (Yes, I know it's an extremely shallow problem haha)
My workaround was to use on-screen buttons. However, the screen is already 5 inches so I didn't want to use any screen real estate for buttons. Came across an app called All-In-One Gestures that lets you create gesture actions. If it's something that sounds interesting to you, you should give it a try as it makes navigating much more intuitive (opinion, of course).
My setup is currently a swipe up from the bottom of the screen in the middle for home, swipe diagonally from the left edge for back, and swipe diagonally from the right for multitasking. So if I'm using it left handed, a swipe will go back and a touch of the closest button will be multitasking, and if I'm using it right handed, a swipe will open the multitasking tray while a touch to the closest button will go back. It's proven really efficient for me!
Click to expand...
Click to collapse
There is also an option for an on screen button(s) under settings >accessibility >dexterity and interaction>assistant menu. It sits as an button over the top of everything on screen and you can edit it to set different options and order of buttons. It might not have the gesture option but still pretty useful.
Sent from my SM-G930F using Tapatalk
:good:
One more alternative, fingerprint sensor as touch home key.
poolmaker said:
One more alternative, fingerprint sensor as touch home key.
Click to expand...
Click to collapse
There's a reason why the S7 didn't come with Soft-Keys, it's because it uses an AMOLED Panel. Prolonged display of bright colors causes burn in, ( you can try checking the S7s at the retail store as those have burned in displays ). Hardware keys would be better to avoid this. Its also the reason why the objects on the Always On Display move around every now and then, its to preven't burnins
Revontheus said:
There's a reason why the S7 didn't come with Soft-Keys, it's because it uses an AMOLED Panel. Prolonged display of bright colors causes burn in, ( you can try checking the S7s at the retail store as those have burned in displays ). Hardware keys would be better to avoid this. Its also the reason why the objects on the Always On Display move around every now and then, its to preven't burnins
Click to expand...
Click to collapse
1. Easyhome doesnt causes amoled burn-in.
Fingerprint sensor short touch is registered as home key.
Once again, fingerprint sensor.
2. Method described in OP is also burn-in free, in settings is possible to adjust transparency of "home area" to zero, therefore no object is permanently displayed.