I tried the Upgrade, but it did never start, so when I tried to get it back to normal, doing a reset, I only get the Bootloader screen, with the USB and v0.60, I tried a Soft and Hard Reset but nonthing, I have tired to re-flash it again, but also nothing, please any help, thanks
The same thing
i have the same thing happen with you
the pda always in bootloader condition,but can't flash completely
it always stop at 78 on erasing rom
and then the computer display CE ERROR
somebody help please
many thanks
I can not even to start the Flash program, I get ERROR : 101
ERROR 101 : CONNECTION ERROR
PLEASE HELP
I WAS ABLE TO REFLASH IT, BUT I STILL GET TO BOOTLOADER ONLY
PLEASE HELP
Related
I have a phone locked to the Taiwanese CID, and therefor tried to unlock this so that english rom upgrades could be installed. Now, to do this I first had to do a downgrade, which I got from the internet, pdamobiz.com_downgrade_and_unlockcid.rar . After the downgrade, the phone was suppose to restart and again enter the first fase of restarting. This did not happend, it just stopped at the first picture, the one with the Dopod logo and info about OS and other things. Completely locked.
This means that I can not connect to my computer. Also, a hard reset is not possible, after formating the disk, the phone just returns to this first picture, without any reinstalling of the original rom. What should i then do?
Could somebody please help get my phone back on its feet?
The OS is now 1.0.13.21
Hey guys, im new here but have been reading but now i am facing a problem i cant seem to fix
my phone became a type 1a brick, os booted radio wasnt working so i got spl etc tried flashing the radio rom and everything was going well until it said my phone was no longer connected and the recovery process wasnt working.
so i tried soft resetting and i got the bootload screen and now my phone is a 2a brick, the mtty set 14 command didnt work so i tried reflashing the rom to the most recent but everytime i would try to flash it it would either freeze up at 12 or 15% and lose the connection to the phone.
so basically im stuck right now and have no idea what to do so if someone could point me in the right direction i could try fixing my phone
Hi,
i installed that new Rom for my htc p3600, and it worked fine.. some minutes after that the screen went black.. i made a softrestart from that small button with the styles.. the trinity started, but stopped on the screen with : smart mobility... that black screen after the moving HTC logo... and nothing happend...
it is just stuck there..
after many restarts i thought i would re install the rom, but the pc can't see the device any more... the redlighted led is on when i plug the device to the pc, but still nothing happening..
the device is just stuck... doesn't go in to the system,, doesn't accept new instalation from the pc...
and all my work is stopped...
i have backup for my data, but i need to use my device.. please please.. help help help.. very fast..........
thank you..
Boot loader
i think may be it will help you if you get in BootLoader Mode ( by pressing the Camera Button and the Off Button )
then during the device in the boot loader mode try to connect it to your PC and try to flash another rom
GOD help you
What's your bootloader details?
ok, i got a att 8525 with herm100 ipl-1.03 & spl-1.11, currently its not booting up because of a failed attempt at installing crc r13.3, i can get it to the tri-color screen, but i can't get it to connect to activesync, it is getting recognized by the other ruu rom flashers but after it goes to 1%, the phone reboots, and i can't get past that even with tryin to flash a factory rom.
there anyway to unbrick my phone?! i've tried a couple of the ways i've found from searching but none seem to work, my pc is running vista but i also have xp on vmware if needed.
well i finally got the factory rom flashed, and now its working again!, i don't know how it happened, it just......happened.
I need help guys. I tried to flash the bootloader and something went wrong. Now it starts up with the three color and have this displayed.
RUUNBH
PANT200
SPL-0.36.0000
CPLD-2
Upgrade ROM code error
Please try again
Serial
It can still detect the USB connection, however it will always timeout. Can anyone help me out with this? I am new to this; So if you can be as detailed as possible it will be great. Thanks in advance.
Update:
So far i've tried loading rom from sdhc card formatted FAT32. With Matbee's version and also Cfays wm6.1. Both however are stuck at Loading after bootloader.
I've tried connecting it to windows but since it won't sync, I can't do anything there. At this point, anything I can do or try is worthwhile.
Thanks.
q+a
id try re flashing to unlock it
prolly by loading it in bootloader mode
if it wont connect during flashing disconnect the usb and reconnect once it starts
lemme kno what u try