Related
This JasJar I have Always have problem waking up after period of inactivity. If I had it powered off for too long, I cannot bring it back to life with any hardware button, except the reset. Usually I can still see the green light flashing indicating the phone in on and working. But I had also tried to call it, but it won't ring. As a PDA the problem wouldn't bother me too much, but as a Smartphone it mean I might have missed a few important calls
the only solution i have now is i go to settings, power, advanced and i disable the "turn off device if not use for" option
it works all the time with me but it eats the battery, specially if i am connecting my BT headset
Please if anyone has a solution let me know
thanks
i forgot to say that it happens even if i take the SIM card out of the device, so i do not think it is a SIM card issue
i do not have and SD cards
Any Help?
it happens randomly with no specific reason, but I tend to believe it's due to a third party s/w. If you made a hard reset and kept using the device with only the standard applications, the device will be very stable except the bluetooth issues.
The issue of the PPC power button, whatever a soft one or a hard one, has been consistently existed since I bought my first PPC with PPC2000. I am so disappointed that it is exactly the same case after some 6 years...
It is usually due to some imcompatibility between the system and some today-enhancing add-ons, which seem necessary for us but sometimes however causing problems like a deep snooze...
thanks for ur answers, actually i do not think it is related to 3rd party applications on today screen plugins, since i already had reflashed my device and i am running now with no applications installed, i am not sure what Phono can do for me i will try to contact them today and see if i can get a replacement or what?
yet any other ideas will be really appreciated
Same problem in my device can any one help me Please
Hey, I had this problem too...
The only way I stopped my PDA from freezing like this was to disable the auto power off feature in Settings/System/Power and keep the backlight turned on (but lower without it plugged in) Settings/System/Backlight.
This helps with other bits too, makes the delay in the unit from ringing less and connection time faster.
Regards.
Dave.
jmdrizen said:
Hey, I had this problem too...
The only way I stopped my PDA from freezing like this was to disable the auto power off feature in Settings/System/Power and keep the backlight turned on (but lower without it plugged in) Settings/System/Backlight.
This helps with other bits too, makes the delay in the unit from ringing less and connection time faster.
Regards.
Dave.
Click to expand...
Click to collapse
Thanks dear .. I will tray it I hope it will fix this problem.
jmdrizen said:
Hey, I had this problem too...
The only way I stopped my PDA from freezing like this was to disable the auto power off feature in Settings/System/Power and keep the backlight turned on (but lower without it plugged in) Settings/System/Backlight.
This helps with other bits too, makes the delay in the unit from ringing less and connection time faster.
Regards.
Dave.
Click to expand...
Click to collapse
Did any experts here got a solution to this? I really don't know why it happened.. I am using MDA from T-Mobile..
still no solution !!
a small update here, i've noticed that this problem does not happen if i am connecting my universal to the power charger, it only happenes if it works on battery, maybe there is sensor or so needs to be replaced ..!!
i am wondering, is it a hardware problem?
do i have to replace my universal ?? or maybe there is something to do with the software or bootloader?
SomeOneCares said:
still no solution !!
a small update here, i've noticed that this problem does not happen if i am connecting my universal to the power charger, it only happenes if it works on battery, maybe there is sensor or so needs to be replaced ..!!
i am wondering, is it a hardware problem?
do i have to replace my universal ?? or maybe there is something to do with the software or bootloader?
Click to expand...
Click to collapse
Um.. Today i tried to "tick off" the battery off option under the "System" page.. it works fine for the entire day.. And battery eats up is just normal. Anyway.. I think it's related to some software conflict of resources but not hardware.. um.. at least, this is one of the solution!
UP
SomeOneCares said:
still no solution !!
a small update here, i've noticed that this problem does not happen if i am connecting my universal to the power charger, it only happenes if it works on battery, maybe there is sensor or so needs to be replaced ..!!
i am wondering, is it a hardware problem?
do i have to replace my universal ?? or maybe there is something to do with the software or bootloader?
Click to expand...
Click to collapse
any solution
Hello,
I have a problem with my HTC HD. From time to time it shuts down without any reason. When I press the power button I can see the Windows Mobile starting...
Did any body else had this problem?
Is there a solution for this?
Thank you
perhaps your battery is not positioned properly or sitting a bit loose? Try a post-it (or something else thin) on the back of the battery cover..
Mine shuts down and won't turn back on without a reset every time I'm in an area with no signal, it basically stays off while I'm at work.
if you keep getting these kinds of nondescript errors and it survives a hardboot, basically there are three options left:
1) try to flash a different firmware or
2) take it back to the store (flash back first)
3) hope like hlll some guru here gets an eyefull of your problem and knows a quickfix (slim chance seeing the number of daily new posts here and the typical guru tendency towards development as opposed to a supportdesk)
I'd set my hopes on 1) or 2). Good luck however you choose.
Cheers,
Rick
Guys,
I'm having quite the same problem: the touch HD keeps turning on and off automatically, as if the power button is pressed (but its not).
Moreover, the power button just don't work. I press it and nothing happened.
I have master reseted the phone and also have changed its ROM, but the problem stills.
Unfortunatelly I'm start thinking that its a hardware problem.
I guess that a solution shoul be reassing the power button, disabling it. Is there any app through which I can reassing the power button?
Have you solved the problem? I have a similar prob, my power button doesn't seem to work when i press it, and if i soft reset (through HD Tweak) when it boots I get a warning message saying " Warning your device will power off and you'll lose your data, Yes No".
It's like the button is half pressed all the time.
Couldn't find any info on hard key remapping either.
I used to have a similar problem but it was with the screen....
The screen used to turn off suddenly without a reason but the phone is turned on and I keep receiving calls. After returing back to my Supplier in Egypt they replaced it with a new one after testing it for three days.
I'm using the new one sine 20th of December 2008 and nothing happened again
Well if you guys are in the US (or have HSDPA/UMTS disabled) then re-enable them (that should hopefully get rid of the restarts in low-to-no-signal areas).
Hope it helps
I know this forum is for the Treo pro, but I figure it's the closest thing to the Treo 800 on here. I'd appreciate any help.
Just got my Treo 800w today. Used but clean ESN and perfect condition.
Activated it on Sprint.
Seemed to be fully functional, but when I put it into standby, or it puts itself into standby the device won't come out of it.
If someone calls me the unit DOES come out of standby.
Oddly enough if I put it into standby and almost immediately hit the button again it will come out of standby.
I thought maybe it was the button but the it will turn the radio on and off, put the device into standby, end a call etc.
Next I thought about doing a hard reset, but I can't get that to work.
I hold down the red button and slap the battery in but no "erase all data" message.
I used to manage a fleet a treo 700wx's including my own and done plenty of hard resets. But I'll be damned if I can get this one to.
Anyone have any ideas?
Thanks,
Kenny
In order 2 perform a Treo Pro hard reset u have 2 take off d battery cover, search for a tiny inlaid button(just big enough for the tip of your stylus pen) located @ d bottom left corner of your treo pro(titled "soft reset")...make sure the standby screen is lighted up and d keypad is unlocked then press and hold down d Red(End Call) Button, turn d device over and push the soft reset button...keep holding down the red button till u the erase all data screen appears...press up on ur navigational button to perform a hard reset...
Note...Make sure u have @least 50% battery life available else u'll brick ur phone if power goes out.Hope dis helps ya
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
"power will be turned off and you may lose data if you have not saved them do you want to continue"
This messages appears always on phone as my phone is fully charged and there is no problem with power butten but the battery get lows very fast and not normal also if u touch the devcie from the battery side you feel its wormer than normal also there was a virus on the system and I reformatted it but got the same problem please I need a solotion for this problem ASAP please
PS I use the original ROM
why_fadoo said:
"power will be turned off and you may lose data if you have not saved them do you want to continue"
This messages appears always on phone as my phone is fully charged and there is no problem with power butten but the battery get lows very fast and not normal also if u touch the devcie from the battery side you feel its wormer than normal also there was a virus on the system and I reformatted it but got the same problem please I need a solotion for this problem ASAP please
PS I use the original ROM
Click to expand...
Click to collapse
your battery might be dead. did you get the phone wet recently? or do you use it in the bathroom or kitchen where there may be steam in the air?
check the connectors on the battery and the device to make sure they are connecting well and dirt free...
can you try someone elses battery? or buy a new one on ebay or deal extreme or something?
good luck
There is no problem in the battery, because sometimes the device is working and excellent battery hold two days I would expect that viros
If you change the Rom you can solve the problem
I'm sorry if change the Rom can solve the problem????
Note can be useful sometimes power button does not work no response
why_fadoo said:
Note can be useful sometimes power button does not work no response
Click to expand...
Click to collapse
Think you've just stated your problem. This looks like you have a faulty power button where is is jammed pressing down casuing your message to appear as it is constantly trying to turn itself off.
I have the exact same problem. When I turn on my phone I get the 'turn off' message, my battery drains in five hours (I've got three batteries so the problem's not there), and if my phone switches off it turns back on right away (= button jammed). It was water damage due to some annoying stranger at a barbecue.
I've searched this site, tried suggestions, tried other places (one tip is to get a small sliver of card and slide it under the power button cap to try and jolt the power button back), and I think I'm now left with either asking HTC to fix it at a cost, or buy another one on eBay etc.
Good luck with yours, let me know if you get anywhere. I wouldn't mind, it's the power-drain that's killing me
Yes,((smeddy)) I face the same problem where I am if you turn off the device is running itself, but Did you change rum can solve the problem or not
Changing ROM makes no difference, shure it's hardware, and I can't unjam it
I know the cause of problem is caused by virus named ((((REMOTEINF.EXE)))))
states if faced with digging virus name on the PC may be moved to the device if you found a way to delete it from the mobile I hope Aalamni I ask anyone who knows the way to help us teach them that no, thank you
I know the cause of problem is caused by virus named ((((REMOTEINF.EXE)))))
states if faced with digging virus name on the PC may be moved to the device if you found a way to delete it from the mobile I hope Aalamni I ask anyone who knows the way to help us teach them that no, thank you
Cero92 said:
Hi all, i just got a Qtek 9090 with WM2003 (ITA). I upgraded to WM6.1, but now it has some strange problems: first of all, when it goes in standby, sometimes it doesn't wake up. If i have to reset it, most of times it doesn't boot (it shut down before WM loads) or i get R: None G: None and i have to reset again (otherwise the phone won't work).
The lock at the boot doesn't happen when the phone is connected at the USB port (i think that's because it charges, maybe it's a battery problem?)
Another thing is that i can't turn it off: if i hold pressed the power button, it deactivate the backlught but the device stays on, and if i make another long press, i get the backlight back again... I had this problem also with WM2003, maybe it's normal?
What do you think? Whan can i do?
Click to expand...
Click to collapse
Have you make a HardReset?
The correct HardReset, not only reset and press Power button!!!
See in my HowTo Section...
and why not WM6.5.5 see here
yep, hard reset is a good start, but about your other problems:
the device does not really turn off, like other phones. pressing the power button makes it go to hibernate, the display turns off, depending on your settings, it locks the hardware buttons and it shuts off wi-fi, it hardly uses any energy but gsm/gprs stay on.
the device seems to be off, yet the phone is one and you can be called. that is the closest you get to switching it off. when you turn on airplane mode, the battery consumption is even less so there is not really a need to turn it off.
pressing and holding the power button always was for the backlight. many other devices open up a shutdown menu when you do that, that would allow you to turn it off, soft reset, or switch off the backlight, but for the BA, that is not the standard. however, if i read it right, d-two is working on remapping the power button, probably for that cause.
the R: none G: none issue is known and not a problem with your phone, whenever you run out of power or remove the battery for a second, the next boot will be w/o radio (R and most roms don't allow booting without it. that's why you get stuck there and have to perform a soft reset. back in the days of wm2003 i used to remove the battery when the device froze to reset it w/o the stylus, because it didn't matter then. with cooked roms, it is different, just like the booting splash screen or the way to perform a hard reset, many things change on a cooked rom.
the issue with waking up from standby, or the SOD (standby of death) is an issue, that most likely has something to do with a backup, restored after flashing another os, or maybe you didn't perform a hard reset, as stated by d-two. you should do that, now that the device is still new, you have nothing to lose
also, read through the tutorials posted by d-two and myself, whether you missed anything while flashing.
The "real" hard reset is the one i can get by pressing camera + record button and reset? If so, i already did it after flash (i use d-two 6.1 Manila ROM in WWE)
It shows me 3 options, i put on YES "Clean Registry Hive" and "Format Storage" then i press the mail button, the screen become white for a while and the next boot al seems to be ok.
It seems, because after some time i get again the "standby of death" and, if i press the reset button, the most of time it won't boot up again (it turns off before i can get to WM), if it works phone doesn't. All these boot problem can be avoided by connecting the phone to the usb cradle, so maybe it's also a battery problem, i think...
@ d-two: i'll try your new ROM, however before i've tried your 6.1 ROM
I've already read your guide because i've got Windows 7 and i couldn't flash without your tutorial
NEWS: installed d-two new ROM, after flash i made the hard reset selecting the second and the third options, then i get the blank screen and, when viewing the htc screen, it shut down itself like it did before
As always, with the usb connected, it has no problem :\
It can be battery power - battery is old, and it doesn't provide current [A], or voltage drops [V] and phone think, it's empty.
Maybe you can try with new battery, or buy 2 nokia bl-4c batteries and repair orginal battery (somewhere on forum there is a tutorial about that - but use bl4c, not bl5c like in tutorial - bl5c are too thick to fit)
n0rbi666 said:
It can be battery power - battery is old, and it doesn't provide current [A], or voltage drops [V] and phone think, it's empty.
Maybe you can try with new battery, or buy 2 nokia bl-4c batteries and repair orginal battery (somewhere on forum there is a tutorial about that - but use bl4c, not bl5c like in tutorial - bl5c are too thick to fit)
Click to expand...
Click to collapse
That's what i was thinking (and that's i hope it isn't)... Now with another recharge cycle it seems to be good also with cooked ROMs, i hope it's solved
Maybe you just have to charge/discharge it for 4-5 times, and it will restore it's capacity. Mine BA was turning off when battery indicator was showing ~60-70%, and now I'm waiting for new battery (i destroyed original )
"charge/discharge it for 4-5 times" does not have an effect on Li-ion kind of batteries. This is probably a software problem. When you turn your phone on (after removing a battery) it always shows "None" for R and G, so just press Reset button and it will be ok. I use Reset to power it on Then you can flash 6.5.5 which doesn't have problems, and do a hard reset. There should be no problem at all..
I also got the problem with the stock ROM :\
The R: None G: None error is the less important problem
Got any luck fixing it? I've had similar problems before, sometimes it turned itself off when the battery was at 60% in WM2003. Did you update to d-two's 6.5.5?
Yes, now i'm running d-two's 6.5.5 ROM.
No, i still had the problem Yesterday i called to the assistance service and they said me to remove the battery and after a while recharge it.
I put off the battery yesterday at 16 and i put it again in the phone this morning at 8, i charged it but i still have the problem
This evening i called again and they said me that i have to send it back, i'll flash the original ROM and send it on monday.
That's a shame, i really like this device, even if it's not mine, my sister uses it and she's not a pro user, what a waste
Didn't understand, what "assistance service"? This is very old phone, I just can't believe it has some kind of warranty
I have another battery, and using it the device turns it off sometimes while it's in the stand-by mode! Don't know why, the voltage on it is fine, I have measured it while working...
marko_serb said:
Didn't understand, what "assistance service"? This is very old phone, I just can't believe it has some kind of warranty
I have another battery, and using it the device turns it off sometimes while it's in the stand-by mode! Don't know why, the voltage on it is fine, I have measured it while working...
Click to expand...
Click to collapse
I bought it on an eBay market and it offered 60 days warranty. It's not official HTC/Qtek warranty, but it doesn't make difference, as long as the device will work
If for you it happens only when it's in standby, maybe you just have the standby of death, the problem Chef Tony was talking about at post 3?
Cero92 said:
I bought it on an eBay market and it offered 60 days warranty. It's not official HTC/Qtek warranty, but it doesn't make difference, as long as the device will work
If for you it happens only when it's in standby, maybe you just have the standby of death, the problem Chef Tony was talking about at post 3?
Click to expand...
Click to collapse
My Roms have no SOD
This is when vbase32 have all 01000000 base adress !!!
Search about SOD!!
No, this happens only with my old battery. I'll try it out now with this new ROM!
I was trying to understand his problem
Just to know, what kitchen do you use?
Cero92 said:
I was trying to understand his problem
Just to know, what kitchen do you use?
Click to expand...
Click to collapse
First i have create my own kitchen but then i have found the OSBuilder and this is the best kitchen ever
With this kitchen you can look the Vbase32 for SOD!!!
Well, i trust you that your ROMs doesn't have SOD problem, in fact this happened to me also with the shipped WM2003 ROM, it's a real hardware issue
Cero92 said:
Well, i trust you that your ROMs doesn't have SOD problem, in fact this happened to me also with the shipped WM2003 ROM, it's a real hardware issue
Click to expand...
Click to collapse
I think so, sorry
d-two said:
I think so, sorry
Click to expand...
Click to collapse
No problem, i'll send it to the assistance on monday, i hope it won't take too much time :\
Cero92 said:
No problem, i'll send it to the assistance on monday, i hope it won't take too much time :\
Click to expand...
Click to collapse
good luck But very cool that you have warranty